MOREGAX specializes in wireless audio connectivity solutions, offering Bluetooth transmitters, receivers, and amplifiers to modernize home stereo systems and enable wireless streaming.
MOREGAX is a consumer electronics brand focused on bridging the gap between legacy audio equipment and modern wireless technology. The brand primarily manufactures Bluetooth audio adapters, including 2-in-1 transmitter and receiver units (such as the M13 Pro and A5 Pro), which allow users to stream high-quality audio from mobile devices to wired speakers or transmit sound from TVs to Bluetooth headphones.
Their product lineup typically features versatile connectivity options like 3.5mm AUX, RCA, Optical, and Coaxial inputs, ensuring compatibility with a wide range of devices including car stereos, home amplifiers, and projectors. Many MOREGAX devices support advanced features such as low-latency audio transmission, dual-link connectivity for pairing two sets of headphones simultaneously, and high-fidelity sound processing.
Последние руководства от manuals+ специально для этого бренда.
Распространенные вопросы о руководствах, регистрации и поддержке этого бренда.
Most MOREGAX adapters feature a physical switch or specific button combinations to toggle modes. Ensure the device is powered off before switching modes, or follow the specific instructions for your model (e.g., A5 Pro) to change settings via the interface.
In Transmitter (TX) mode, set your Bluetooth headphones to pairing mode first. Then, double-click the search button (often labeled 'Q' or similar) on the MOREGAX adapter to enter pairing mode. The indicator light typically flashes red quickly while searching and turns solid once connected.
For many models, such as the A5 Pro, you can reset the device by long-pressing a specific button (often the multifunction or search button) for about 8 seconds until the indicator lights flash, clearing previous pairing histories.
Yes, many MOREGAX transmitters support dual-link connectivity. After connecting the first pair of headphones, double-click the search/pairing button again to connect the second device. Both devices should receive audio simultaneously.
Ensure your TV audio output is set to PCM format if using an Optical connection, as Dolby/DTS is often not supported. Also, verify that the adapter is in the correct mode (TX for sending audio from TV) and that the cables are plugged into the TV's audio OUTPUT ports, not input.