РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
EVL Evaluation Encoder
Precision with Flexibility, Engineered for Early Design Implementation
Designing mechanical systems with integrated controls requires precise and adaptable feedback solutions, especially during prototyping. That’s why we developed the EVL Evaluation Encoder: a configurable tool that puts you in control of key encoder parameters from day one.
Fully configurable from your workbench
- Resolution – Adjustable Bits per Revolution
- Interface – BiSS-C or SSi
- Software Multi-Turn Counter
- Built-in Test (BIT)
The EVL comes in the standard VL form factor (Ø13–247 mm) and is supplied with a 750 mm cable terminating in a female D-type connector, ready for immediate evaluation.
Encoder Explorer software provides full parameter control, plus
- Пределы View – to avoid out-of-spec operation
- Картографирование View – to understand protocol behaviour and system impact
EKIT Contents
When ordering EKITs, you receive encoder and 4 items — or 5 in the case of the VLX family:
- Blue Box – USB to RS-422/485 converter.
- Cable for connecting the Blue Box to the computer (USB A to B).
- Dynamic jig – varies according to the product size.
- Cable with a male D-type connector and flying leads for connecting to your controller/system
- VLX family only – Cable with a connector to the encoder on one end and a D-type connector for the Blue Box on the other.
By experimenting with different parameter combinations during the evaluation process, you can determine the optimal configuration for your system – leading to a precise encoder part number that you can confidently move forward with for production.
Механические чертежи
All EVL product drawings are identical to the ICD drawings shown on the website, according to their respective product families.
How do you configure an EVL encoder?
The EVL encoder can configure 4 parameters:
| Параметры | Диапазон | Необходимый |
| Протокол | SSI/ BiSS | Должен |
| Разрешение | 16-23 | Должен |
| Shaft turn | АБ | Необязательный |
| BIT (built in Test) | Включить/Выключить | Необязательный |
*For your attention, changing the parameters does not require a new calibration, and the initial calibration remains valid.
Примечание: The maximum bits for the encoder is 32. Therefore, we made a visual Light bar that helps to understand how many you can add.
Communication Protocol – BiSS or SSi
- SSi Protocol: 23 bits available
- BiSS Protocol: 20 bits available, with BIT functionality provided separately
Make sure to click on “Apply Changes” so that the modification will be applied to the encoder.
Resolution (in bits)
For each encoder, the native bit count may vary, as there is an option to enable a distinct capability.
In noisy environments, using the native bit value is recommended for better performance.
Please refer to the native bit table below.
| СЕМЬЯ | РОДНОЙ |
| ВЛП-13 | 15 |
| ВЛП-25 | 17 |
| ВЛП-35 | 17 |
| ВЛП-60 | 18 |
| ВЛП-80 | 19 |
| ВЛП-100 | 18 |
| ВЛП-140 | 19 |
| ВЛП-170 | 19 |
| ВЛП-247 | 18 |
Software Shaft Turn Counter
This option is not mandatory and is intended only for applications that require shaft counting.
The Software Type box [√] must be enabled before selecting the Resolution [bit].
The calculation of the number of rotations is determined by the number of bits you select. For example, if you choose 12 bits, the number of possible rotations will be 4096 (219).
The “Mapping View” can be accessed by clicking on the box.
В этом view, you can see how the bits have been allocated according to the requirements you defined for the encoder.
Built-in Test (BIT)
This option is also not mandatory.
If you would like to perform a BIT (Built-In Test) on the encoder’s operation, you should enable this option.
For your information, you can always click the “RESTORE DEFAULT” button to revert the encoder to the factory default settings as it was shipped from our plant.
ИЗРАИЛЬ
Прецизионные датчики положения Netzer ACS Ltd.
Индустриальный парк Мисгав, а/я 1359
Misgav, 2017400
Тел: +972 4 999 0420
США
Netzer Precision Position Sensors Inc.
250 Коммерческая улица, офис 3008
Манчестер, Нью-Гэмпшир 03101
Тел: +1 617 901 0820
https://me-qr.com/vg6iYcIf
Документы/Ресурсы
 |
Netzer EVL Evaluation Encoder [pdf] Руководство пользователя EVL Evaluation Encoder, Evaluation Encoder, Encoder |