MAGICAMENTE Kitchen Set Instructions

MAGICAMENTE Kitchen Set

Технические характеристики

• Бренд: MAGICAMENTE
• Рекомендуемый возраст: 3+
• Страна происхождения: Сделано в Китае
• Материалы: Not specified, but includes plastic fasteners and various-sized screws (M4X44mm, M4X36mm, M4X15mm, M3X18mm).
• Содержание: Various numbered pieces (1-21) and accessories (25-28) as detailed in the ‘CONTENIDO’ and ‘ACCESORIOS’ sections of the manual.

Инструкция по применению

WARNING! Choking hazard – Small parts. Not suitable for children under 3 years.

The tableware is not intended to contact real food; please do not fill or contact real food.

Требуется сборка взрослыми.

Примечание 1:

Organize your parts.
Make sure you have all the required parts BEFORE starting the assembly!

• Please use a manual screwdriver for assembly, or set your electric screwdriver to the minimum torque to avoid damaging the product. If the minimum torque is not enough to turn the screws, gradually increase the torque as needed.
• Do not fully tighten the screws until all panels are connected.
• To complete the assembly, use a manual screwdriver to fully tighten all screws until they are secure.

Примечание 2:

• The plastic fasteners are pre-installed. However, they may shift during transport. Please check whether the fasteners are correctly seated in the holes and adjust them if they are misaligned.
• The correct installation positions are as follows:

Список деталей

Перед сборкой:

1. Прочитать инструкцию: Please read all instructions before assembling. Incorrect assembly could result in a hazard for the child.
2. Сортировка частей: Order your pieces. Make sure you have all the required parts BEFORE starting assembly!

Советы по сборке:

• Minimum Torque: Please use a manual screwdriver for assembly or adjust your electric screwdriver to MINIMUM TORQUE to avoid damaging the product. If the minimum torque is not sufficient to turn the screws, gradually increase the torque as needed.
• Do Not Fully Tighten Initially: DO NOT FULLY TIGHTEN SCREWS UNTIL ALL PANELS ARE CONNECTED.
• Окончательная затяжка: To complete assembly, use a hand screwdriver to fully tighten all screws until they are snug. DO NOT OVERTIGHTEN! Overtightening will cause the product to crack.
• Plastic Fasteners (Note 2): Plastic fasteners are pre-installed. However, they may shift during transport. Please check if the fasteners are correctly seated in the holes and adjust them if they are misaligned. The correct installation positions are shown in the diagram on  Pay attention to Note 2 in assembly steps B, E, H, I, J, K, L, O.

Этапы сборки:

Follow the diagrams and part numbers provided on

1. Шаг А: Use parts 1, 20 (x2) and screws 27 (x2).
2. Step B (See Note 2): Use parts 3 and screws 26 (x2).
3. Шаг С: Use parts 2, 6 (x2).
4. Шаг Г: Use parts 14 and screws 27 (x2).
5. Step E (See Note 2): Use parts 5 and screws 26 (x4).
6. Шаг F: Use parts 4, 16, 19 and screws 28 (x2).
7. Шаг G: Use parts 7, 11, 12 and screws 26 (x2).
8. Step H (See Note 2): Use parts 8, 9 and screws 25 (x2).
9. Step I (See Note 2): Use parts 13 (x2) and screws 25 (x4).
10. Step J (See Note 2): Use part 9 and screw 25.
11. Step K (See Note 2): Use part 15 and screw 25. Внимание! Before continuing to the next step, slightly loosen the screw on the back to regulate the turning force of the switches.
12. Step L (See Note 2): Use part 10 and screws 25 (x2).
13. Step M: Use parts 17, 18 (x2).
14. Step N: Use screws 26 (x6).
15. Step O (See Note 2): Use screws 26 (x4).
16. Step P: Use part 21.

Поиск неисправностей

• Product Damage During Assembly: If you notice cracking or damage, you may be overtightening screws. Loosen slightly and re-tighten gently. Always use minimum torque for power tools.
• Loose Parts/Wobbly Structure: Ensure all screws are fully tightened (but not overtightened) after all panels are connected. Check that plastic fasteners are correctly seated as per Note 2.
• Отсутствующие детали: Refer to the ‘CONTENIDO’ and ‘ACCESORIOS’ sections to verify all parts are present before starting assembly. If parts are missing, contact the manufacturer.
• Трудности с закручиванием винтов: If using a manual screwdriver, apply firm, steady pressure. If using an electric screwdriver, gradually increase the torque from minimum if the screws are not turning.