HEMNES Solid Pine Desk
Инструкция по сборке
This document provides assembly instructions for a furniture item, including safety guidelines, parts lists, hardware lists, and step-by-step assembly procedures.
Технические характеристики
| Компонент | Максимальная грузоподъемность |
| Main Item | 150 фунтов (68 кг) |
| Shelf/Drawer | 11 фунтов (5 кг) |
| Другой | 22 фунтов (10 кг) |
Краткое пособие
Read all instructions before beginning. Ensure all parcels are received. Assembly by two people is recommended. Use the parts and hardware lists to identify and separate components. Save all packing materials until assembly is completed.
ИНСТРУКЦИЯ ПО СБОРКЕ
Важные инструкции по технике безопасности:
- ● Please read all instructions before beginning assembly
- ● Please make sure receive all the parcels to start the assembly
- ● For your safety and convenience, assembly by two people is recommended
- ● Use the parts and hardware lists to identify and separate each of the components included
- ● Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts or hardware
СПАСИБО ЗА ПОКУПКУASING
СПИСОК ДЕТАЛЕЙ
| 1 X1 | 2 X1 | 3 X1 | 4 X1 | 5 X1 |
| 6 X1 | 7 X1 | 8 X1 | 9 X1 | 10 X1 |
| 11 X1 | 12 X1 | 14 X1 | 15 X1 | 16 X1 |
| 17 X1 | 18 X1 |
Максимальный вес
MAXIMUM WEIGHT: 150 LBS (68 KG)
МАКСИМАЛЬНЫЙ ВЕС:
11 фунтов (5 кг)
МАКСИМАЛЬНЫЙ ВЕС:
22 фунтов (10 кг)
СПИСОК ОБОРУДОВАНИЯ
| Имя | Часть | Кол-во | Запасной |
|---|---|---|---|
| A |
|
11 | 1 |
| B |
|
11 | 1 |
| C |
|
18 | 1 |
| D |
|
4 | |
| F |
|
1 | |
| G |
 7/8″ Болт |
1 | 1 |
| H |
|
2 |
| Имя | Часть | Кол-во | Запасной |
|---|---|---|---|
| I |
 Винт 2-3 / 8 ″ |
18 | 1 |
| J |
 1/2 ″ винт |
4 | |
| K |
 2 ″ винт |
5 | 1 |
| L |
 Винт 1-1 / 2 ″ |
4 | |
| M |
 9/16 ″ винт |
2 | |
| O |
 2 ″ винт |
2 |
ШАГ 1
| Часть | Количество | Описание |
|---|---|---|
| C | 9шт. | Деревянный дюбель |
| A | 2шт. | Кулачковый болт |
Prepare the wooden components by inserting hardware as follows:
- Часть 5: Insert 2 wooden dowels (C) into each end (4 total).
- Часть 4: Insert 2 wooden dowels (C) into the top edge.
- Часть 3: Insert 2 wooden dowels (C) into the top edge and 1 cam bolt (A) into the side. Tighten cam bolt (A) with a screwdriver.
- Часть 11: Insert 1 wooden dowel (C) into one end.
ШАГ 2
Требуется помощник.
| Часть | Количество | Описание |
|---|---|---|
| K | 4шт. | Длинный шуруп |
| I | 4шт. | Длинный болт |
Assemble the main frame by connecting the side panels to the horizontal rails:
- Соединять Часть 3 к Часть 5 и Часть 6 using 4 screws (K).
- Соединять Часть 4 к Часть 5 и Часть 6 using 4 bolts (I).
ШАГ 3
Требуется помощник.
K
х 1шт
I
х 1шт
ШАГ 4
C
х 9шт
ШАГ 5
| Элемент | Количество | Изображение |
|---|---|---|
| I | 1шт |
Image: A long screw with a flat head and a threaded shaft. |
- Attach board (10) to the raw edge of panel (7) using screw (I).
Готовая сторона
7
Необработанный край
10
Image: Diagram for Step 5 showing board (10) being attached to the raw edge of panel (7) with screw (I). The finished side of panel (7) is also labeled.
ШАГ 6
| Элемент | Количество | Изображение |
|---|---|---|
| B | 2шт. |
Image: A cam lock hardware component. |
- Attach board (8) to frame component (3) using cam locks (B).
3
8
Image: Diagram for Step 6 showing board (8) being attached to frame component (3).
- 1 Image: Diagram 1: Insert bolt into the hole.
- 2 B Image: Diagram 2: Insert cam lock (B) into the hole.
- 3 Tighten Image: Diagram 3: Tighten the cam lock using a screwdriver.
ШАГ 7
| Часть | Количество |
|---|---|
| Ⓘ | х 4шт |
ШАГ 8
| Часть | Количество |
|---|---|
| Ⓘ | х 8шт |
ШАГ 9
|
A |
х 9шт |
ШАГ 10
|
B |
х 9шт |
|
O |
х 2шт |
With assistant carefully stand unit up.
3 Затянуть
ШАГ 11
| Аппаратное обеспечение | Описание | Количество |
|---|---|---|
| D | Деревянный дюбель | 4 шт. |
ШАГ 12
ШАГ 13
H
х 2шт
M
х 2шт
Do not use power screw driver,
use manual screw driver.
ШАГ 14
J
х 4шт
L
х 4шт
Do not use power screw driver,
use manual screw driver.
ШАГ 15
| Этикетка детали | Количество | Изображение |
|---|---|---|
| F | 1шт |
Image: Bracket F |
| G | 1шт |
Image: Screw G |
ШАГ 16
- -Move unit to final location.
- -Adjust drawer fronts as shown below.
- Step1–Loosen screws on back of drawer front brackets as shown.
- Step2–Position drawer front as required.
- Step3–Tighten screws while holding drawer front in position.
ЯЩИК ПЕРЕДНИЙ VIEW
|
Image: Diagram showing centered drawer front alignment. |
Image: Checkmark icon indicating correct alignment. |
|
Image: Diagram showing off-center drawer front alignment. |
Image: X icon indicating incorrect alignment. |
ШАГ 1.
Image: Diagram showing a screwdriver loosening a screw on the bracket with a counter-clockwise arrow.
ШАГ 2.
Image: Diagram showing the drawer front bracket with multi-directional arrows indicating the range of motion for adjustment.
ШАГ 3.
Image: Diagram showing a screwdriver tightening a screw on the bracket with a clockwise arrow.
Поиск неисправностей
No troubleshooting information is available in the provided text.
Документы/Ресурсы
| HEMNES Solid Pine Desk |
Ссылки
- Руководство пользователяmanual.tools