Elecrow ESP32 AI Camera Development Board Vision Sensor Board

Детали устройства

1. Заголовок динамика
2. RGB-свет
3. Эл Баттон
4. МИК
5. Заголовок UART
6. TF слот для карты
7. Камера
8. Вспомогательный свет
9. Кнопка сброса
10. Спикер
11. Порт типа C
12. Мощность света
13. Индикатор батареи
14. BAT Header

Краткое пособие

• Al Button:
  • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
• Ключ сброса:
  • Single-click to reboot after firmware flashing failure or device malfunction.
• Световой индикатор питания:
  • The red LED is on steadily when powered.
• Индикатор батареи:
  • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

Сетевое сопряжение

1. Plug in the Type-C cable to power on.
2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
   • Если webpage does not open automatically, please visit 192.168.4.1 in your browser.
4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
   • You can see your Wifi in “WiFi Network”.
   • Примечание: If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.
5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.
6. After the account is successfully created and logged in, you will receive a 5000-point reward.
7. Click the “Al Hub” button to start “Add Agent”.
8. Click “Add Agent” and give your Al Agent a name.
9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.
10. After completing “Add Device”, you can configure the character.
11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.
    • Примечание: If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

Основные характеристики

• Название продукта: Al Camera Module
• Главный контроллер ЭСП32-С3Р8
• Отображать 1.83-inch TFT-LCD Touch Screen
• Пиксели 2 МП
• Беспроводной WiFi & Bluetooth 5.0
• Вспышка 16 МБ
• TF слот для карты Поддержка до 128GB
• Интерфейс UART Interface. IC Pad
• Вход 5В/1А
• Размеры 56.05*44.5*18.6 мм
• Рабочая температура -20°С до 65°С

Документы/Ресурсы

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] Руководство пользователя ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

Ссылки

• Руководство пользователя