coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Конфигурация сети

1. Включите продукт
   • Align the opener to the slot
   • Чтобы открыть крышку батарейного отсека, поверните ее против часовой стрелки.
   • Remove the battery insulation film to power
2. Нажмите кнопку RESET на 3 секунды, затем отпустите, красный светодиод начнет мигать, указывая на конфигурацию сети.

Инструкция по установке

Положение установки
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Пожалуйста, внимательно прочитайте руководство и используйте продукт правильно.
Спасибо за покупкуasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Описание продукта

Советы:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Параметры продукта

• Product Name Zigbee Ambient Light Sensor
• Беспроводной протокол Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm