SC&T Manuals & User Guides

SC&T (Smart Cabling & Transmission Corp.) is a premier manufacturer of AV and CCTV signal transmission equipment. Specializing in professional-grade connectivity, SC&T offers a wide portfolio of products designed to extend, distribute, and switch video signals over long distances using standard network cabling.

К основным линейкам продукции относятся:

• HDMI & KVM Extenders: Solutions for transmitting high-definition video and control signals over CAT5e/6/7 cables or fiber.
• Matrix Switchers: Advanced routing for multi-source and multi-display environments.
• Signal Converters: SDI to HDMI, VGA to HDMI, and other format interconnections.
• CCTV Solutions: Transmission accessories for security and surveillance systems.

Known for reliability and technical innovation, SC&T provides essential infrastructure for digital signage, command centers, and smart classrooms.

• How do I reset my SC&T device to factory defaults?

  For many IP-based models, you can reset the device by pressing and holding the specific channel or reset button during power-on, or by entering a specific code (e.g., MENU, 3, 3, 3, ENTER) on the IR remote control. Refer to your specific model's manual for exact steps.

• What type of cable is recommended for SC&T HDMI extenders?

  SC&T recommends using high-quality CAT5e, CAT6, or CAT7 UTP/STP/FTP cables. Higher quality cables like CAT6a are preferred for 4K resolutions and maximum transmission distances up to 100 meters.

• How often does the Auto Scan function switch inputs on SC&T switchers?

  On models like the HS04-4K6G, the auto-scan function typically activates after a signal loss (e.g., 30 seconds of no signal) or cycles through available inputs. The scan interval or behavior can often be configured via the front panel or IR remote.

• Can SC&T extenders support power delivery (PoH/PoE)?

  Many SC&T extenders support PoH (Power over HDBaseT) or similar technologies where one side (TX or RX) powers the other. However, some specific USB or budget models may require independent power supplies at both ends. Always check the 'Power Supply' section of the datasheet.

• How do I update the firmware on my SC&T device?

  Firmware updates are typically performed via a micro-USB port connection to a PC, or through the Web GUI for AV-over-IP products. You will need the latest firmware file from the SC&T website and the appropriate update tool.