Руководства и инструкции пользователя HOMACER

ГОМАЦЕР provides an extensive selection of premium sliding barn doors and hardware kits that combine high-quality craftsmanship with exquisite modern and rustic designs.

Their products are made to be affordable, incredibly durable, and easy to assemble for DIY enthusiasts and professionals alike. Whether you are looking for classic barn door tracks, bypass systems, floor guides, or soft-close hardware, HOMACER aims to simplify the process from measuring to mounting.

• What is the weight capacity of HOMACER barn door hardware?

  The hardware can support up to 220 lbs. However, if all studs are properly attached, it can handle a maximum weight of 300 lbs for all doors combined.

• When is a header board recommended for sliding barn doors?

  A header board is highly suggested when wall studs do not align with the pre-drilled track holes, or when the door thickness combined with trim exceeds 1-1/2".

• What drill bit sizes are recommended for installing HOMACER doors?

  Typically, you should use a 3/16 drill bit for lag bolts, a 3/8 drill bit for flush roller hex bolts, and a 1/8 drill bit for inverted roller screws.

• What do I do if my HOMACER track rail is too long?

  If the rail is too long, you can combine rail pieces using the designated rail spacers and connectors to adjust sizing, following the joint connection guides in your manual.

• How do I adjust the HOMACER door stoppers?

  HOMACER door stoppers are easily adjustable. You can change their position by sliding them along the track and tightening them securely with a hex wrench where you want the door to stop.