Важная информация по безопасности
- Adult assembly is required. Ensure all parts are securely fastened before use.
- This product is designed for outdoor use. Place the coop on a level, stable surface.
- Regularly inspect the coop for any loose parts, damage, or wear. Tighten fasteners and replace damaged components as needed.
- Во избежание травм держите детей и домашних животных подальше от места сбора.
- Always ensure the door is locked to keep poultry secure and prevent predators from entering.
- The weatherproof cover provides UV protection and shelter from rain. Ensure it is properly secured to prevent wind damage.
Содержимое упаковки
Before beginning assembly, verify that all components listed in your product's specific parts list are present and undamaged. Refer to the included detailed instruction manual for a complete list of parts.
Image: The product is delivered in a single package, containing all necessary components for assembly.
Типичные компоненты включают в себя:
- Galvanized Steel Tubing (various lengths and shapes for frame)
- Plastic-Coated Steel Mesh (for enclosure walls)
- 420D Oxford Fabric Cover (weatherproof and UV resistant)
- Hardware (screws, bolts, clips, bungee cords for cover)
- Door Latch Mechanism
Инструкция по сборке
Assembly of the PawHut Metal Chicken Coop typically requires two individuals and can be completed in approximately 2 hours. Follow the detailed step-by-step instructions provided in your product's manual for precise guidance.
- Конструкция рамы: Begin by assembling the galvanized steel tubing to form the main frame of the chicken coop. Ensure all connections are secure.
- Установка сетки: Attach the plastic-coated steel mesh to the frame, ensuring it is taut and covers all open sides to create a secure enclosure.
- Сборка двери: Install the door frame and attach the mesh and latch mechanism. Verify that the door opens and closes smoothly and locks securely.
- Крепление крышки: Drape the 420D Oxford fabric cover over the top section of the frame. Secure it using the provided bungee cords or clips, ensuring it is tightly fitted to offer maximum weather protection.
Image: Diagram illustrating the dimensions and structural components of the chicken coop frame during assembly.
Image: Close-up details of the secure latch, spring button clip, galvanized steel pipe, and powder-coated steel wire mesh, highlighting key assembly points.
Image: The silver-coated 420D Oxford fabric cover, demonstrating its waterproof and UV protection features when installed on the coop.
Video: A short demonstration of the PawHut chicken coop, including its features and a brief overview процесса сборки.
Инструкция по эксплуатации
This walk-in chicken run provides a secure and spacious environment for your poultry.
- Доступ: Use the lockable door for easy entry and exit to tend to your chickens or clean the enclosure. Always ensure the door is securely latched after use.
- Размещение: Position the coop in a suitable outdoor location, ideally with some natural shade in addition to the provided UV cover.
- Приют: The silver-coated 420D Oxford fabric cover offers protection from sun and rain, ensuring your chickens remain comfortable in various weather conditions.
- Емкость: The coop is designed to comfortably house 10 to 15 hens, providing ample space for them to roam and forage.
Изображение: Антенна view highlighting the spacious interior of the chicken coop, indicating its capacity for 10-15 chickens.
Image: The chicken coop shown combined with a wooden chicken coop, demonstrating its versatility for creating an extended living space for poultry.
Обслуживание
Regular maintenance will extend the lifespan of your PawHut Metal Chicken Coop and ensure a healthy environment for your poultry.
- Уборка: Periodically clean the interior of the coop and the mesh walls. The fabric cover can be wiped down with a damp ткань.
- Инспекция: Routinely check all frame connections, mesh integrity, and the door latch for any signs of wear, rust, or damage.
- Cover Security: Ensure the weatherproof cover remains tightly secured, especially during windy conditions, to prevent it from dislodging or tearing.
- Крепление к грунту: Verify that the coop remains stable on its ground anchors (if applicable) to prevent shifting or tipping.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Дверь не закрывается и не запирается должным образом. | Misaligned frame or latch mechanism. Obstruction in the door path. | Check frame alignment and adjust if necessary. Clear any debris from the door path. Inspect the latch for damage. |
| Cover is loose or flapping in wind. | Bungee cords or clips are not securely fastened. | Re-secure all bungee cords and clips, ensuring the cover is taut across the frame. |
| Coop feels unstable. | Uneven ground. Loose frame connections. | Relocate the coop to a level surface. Tighten all frame bolts and connections. Ensure ground anchors are fully engaged. |
Технические характеристики
- Номер модели: D51-435V01SR
- Габаритные размеры: 340L x 300W x 190H см (133.9" Д x 118.1" Ш x 74.8" В)
- Материал: Galvanized Steel, Plastic-Coated Steel Mesh, 420D Oxford Fabric (Polyester)
- Цвет: Silver (Cover)
- Емкость: 10-15 цыплят
- Особые характеристики: Lockable Door, Spacious Interior, Weather Resistant (UV Protection, Waterproof Cover)
- Время сборки: Approximately 2 hours (with 2 people)
Image: The fully assembled PawHut Metal Chicken Coop situated in a garden, showcasinего дизайн и масштаб.
Гарантия и поддержка
This product is manufactured by Aosom Canada. For any questions regarding assembly, missing parts, or product operation, please contact customer support.
- Производитель: Аосом Канада
- Место ведения бизнеса: Маркхэм, Онтарио, Калифорния
- Обслуживание клиентов: Тел. 1-416-792-6088
- Политика возврата: Eligible for return or refund within 30 days of receipt.