1. Введение
Thank you for choosing the Lydsto WL09 Robot Window Cleaner. This device is designed to simplify window cleaning with its advanced features, including a dual ultrasonic spray system, intelligent suction power, and multiple cleaning modes. Please read this manual carefully before use to ensure safe and efficient operation.
2. Информация по технике безопасности
- Always connect the safety rope to a secure, immovable object before operating the robot.
- Ensure the power cord is securely connected to prevent accidental disconnection.
- Do not use the robot on cracked, damaged, or excessively dirty glass surfaces.
- Avoid using the robot in extreme temperatures (below 0°C or above 40°C).
- Во время работы держите робота подальше от детей и домашних животных.
- Only use clean water or recommended window cleaning solution in the water tank.
- The robot has an emergency battery for power outages, providing approximately 25 minutes of operation.
3. Настройка
3.1 Распаковка и компоненты
The Lydsto WL09 package includes:
- Lydsto WL09 Robot Window Cleaner (x1)
- Ящик для хранения (1 шт.)
- Пульт дистанционного управления (x1)
- Cleaning Cloths (x8, including 1 pre-installed pair)
- Адаптер (x1)
- Safety Rope (x1)
- Кабель питания (1 шт.)
- Replacement Nozzles (x2)
- Empty Bottle (x1)
Image: All components of the Lydsto WL09 Robot Window Cleaner, including the robot, remote control, power adapter, safety rope, cleaning cloths, and empty bottle.
3.2 Installing Cleaning Cloths
Attach the microfiber cleaning cloths to the rotating discs on the underside of the robot. Ensure they are stretched smoothly and cover the entire disc surface.
Image: A close-up of hands attaching the microfiber cleaning cloths to the rotating pads of the Lydsto WL09 robot.
3.3 Заполнение резервуара для воды
Open the water tank cover and use the provided empty bottle to fill the 80ml tank with clean water or a suitable window cleaning solution. Close the cover tightly to prevent leakage.
Image: The Lydsto WL09 robot showing its visible 80ml water tank and dual ultrasonic spray nozzles.
3.4 Подключение силового и страховочного троса
Connect the power cable to the robot and the adapter, then plug the adapter into a power outlet. Securely attach the safety rope to a fixed point, such as a window frame or a sturdy furniture leg, to prevent the robot from falling.
Image: The Lydsto WL09 robot attached to a window, illustrating the safety rope connected to a secure point.
4. Инструкция по эксплуатации
4.1 Запуск машины
Place the robot on the glass surface. Press and hold the power button on the robot for 3 seconds to turn it on. Once the robot is securely adsorbed to the glass, briefly press the start button to begin cleaning.
Video: A demonstration of a robot window cleaner being placed on a window and starting its cleaning cycle. This video is provided by a seller and shows general operation.
4.2 Automatic Route Planning
The Lydsto WL09 features intelligent AI navigation. After starting, the robot will automatically detect the window edges and plan an efficient S-shaped cleaning path to cover the entire surface.
Image: The Lydsto WL09 robot cleaning a window, illustrating its intelligent navigation and cleaning patterns.
4.3 Использование дистанционного управления
Use the remote control to manually direct the robot, select different cleaning modes (automatic, deep clean, targeted clean), and control the water spray function. The remote allows for convenient operation without manual adjustment.
Image: The remote control for the Lydsto WL09 robot, highlighting buttons for automatic, deep, and targeted cleaning modes, as well as water spray control.
Video: A robot window cleaner operating on a window, demonstrating its movement and the use of a remote control. This video is provided by a seller and shows general operation.
5. Техническое обслуживание
5.1 Салфетки для уборки
After each use, remove the cleaning cloths from the rotating discs. They can be washed in a washing machine (gentle cycle) but should not be tumble-dried or ironed. Allow them to air dry naturally.
5.2 Chassis Cleaning
Wipe the robot's chassis clean with a dry cloth. For the bottom suction port, wipe it clean with a dry cloth to avoid damage to the product's suction force.
5.3 Замена насадки
If the robot cannot spray water in wet wiping mode, the nozzle may be blocked. Use pliers to gently pull off the old nozzle and replace it with a new one from the packaging accessories.
6. Поиск Неисправностей
- Robot not adhering: Ensure the glass surface is clean and dry. Check for sufficient suction power (6000Pa).
- Uneven cleaning: Replace dirty cleaning cloths. Ensure the water tank is filled.
- Пульт не работает: Проверьте батарейки в пульте дистанционного управления. Убедитесь, что между пультом и роботом нет никаких препятствий.
- Машина неожиданно остановилась: Check power connection. The emergency battery provides temporary power during outagес.
7. Технические характеристики
- Бренд: Лидсто
- Название модели: WL09
- Цвет: Серый
- Размеры продукта: 29.2 х 14.3 х 8.7 см
- Вес товара: 2.8 Килограмма
- Томtage: 14.8 Вольт
- Особые характеристики: Dual ultrasonic spray system, Intelligent suction power adjustment, Two high-speed rotating discs
- Рекомендуемые поверхности: Glass, Plywood (smooth surfaces)
8. Гарантия и поддержка
For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official Lydsto webСохраните чек в качестве подтверждения покупки.
