Vortex DFST-MRD3-E

Vortex Defender-ST Enclosed Solar Micro Red Dot Sight Instruction Manual

Model: DFST-MRD3-E

1. Введение

The Vortex Defender-ST Enclosed Solar Micro Red Dot Sight is designed for rapid target acquisition and reliable performance in various conditions. Its fully enclosed design protects the emitter from environmental elements, ensuring durability and consistent operation. This manual provides essential information for the proper setup, operation, and maintenance of your Defender-ST red dot sight.

2. Продукт закончилсяview

2.1 Основные характеристики

  • Закрытая конструкция: Protects the emitter from dust, rain, and impact.
  • Асферическая линза: Обеспечивает большой viewing window for fast target acquisition and a wide field of view.
  • Fast-Rack Textured Front: Enhances grip for racking the slide off any surface.
  • Варианты прицельных сеток с несколькими вариантами: Offers 3 reticle choices (3 MOA dot, 32 MOA circle, and 3 MOA dot with 32 MOA circle).
  • Настройки яркости: 12 levels, including 10 for daylight and 2 for night-vision compatibility.
  • Технология Solar Auto D-TEC: Extends battery life by automatically drawing power from solar or battery sources based on light conditions.
  • Активируется движением: Features a 10-minute auto-shutoff to conserve battery.
  • Аккумулятор с боковой загрузкой: Allows for easy battery replacement without removing the sight.
  • Прочная конструкция: Made from 7075 aluminum housing, waterproof, fogproof, and shockproof.

2.2 Компоненты

The Vortex Defender-ST includes the following components:

  • Vortex Defender-ST Enclosed Solar Micro Red Dot Sight
  • Крепление Пикатинни
  • Пользовательский инструмент
  • Резиновая крышка
  • Наиболее распространенные комплекты крепежных винтов
  • Аккумулятор CR2032
  • Ткань объектива
  • Glock MOS Plate
  • Удлинённая бита Torx T-10
Diagram of Vortex Defender-ST with labeled parts: Solar Panel, Fast-Rack Textured Grip, Plus Button, Minus Button, Battery Cap, Elevation Turret, Windage Turret.

Figure 1: Labeled components of the Vortex Defender-ST Red Dot Sight.

Contents of the Vortex Defender-ST box including the red dot sight, Picatinny mount, Glock MOS adapter plate, rubber cover, extended Torx T-10 bit, custom tool, CR2032 battery, various mounting screw sets, lens cloth, and product manual.

Figure 2: Contents included in the Vortex Defender-ST packaging.

3. Настройка

3.1 Установка аккумулятора

  1. Locate the battery cap on the right side of the sight.
  2. Use the provided custom tool or a suitable coin to unscrew the battery cap counter-clockwise.
  3. Вставьте батарею CR2032 положительным (+) полюсом вверх.
  4. Replace the battery cap and tighten it clockwise until snug. Do not overtighten.

3.2 Установка прицела

The Defender-ST is compatible with a DeltaPoint Pro footprint. Use the appropriate mounting screws and plate for your firearm.

  1. Убедитесь, что ваше огнестрельное оружие разряжено и находится в безопасном месте.
  2. Select the correct mounting plate (e.g., Picatinny Mount, Glock MOS Plate) and screw set for your firearm.
  3. Attach the chosen mounting plate to your firearm according to the firearm manufacturer's instructions.
  4. Place the Defender-ST sight onto the installed mounting plate.
  5. Secure the sight to the plate using the appropriate screws from the provided screw sets. Apply thread locker if recommended by your firearm or mount manufacturer. Tighten screws to the recommended torque specifications.

4. Инструкция по эксплуатации

4.1 Включение/выключение питания

  • Для включения: Press either the '+' or '-' button.
  • Чтобы выключить: Нажмите и удерживайте кнопку «-» в течение 3 секунд.

4.2. Регулировка яркости

The Defender-ST has 12 brightness settings (10 daylight, 2 night-vision).

  • Press the '+' button to increase brightness.
  • Press the '-' button to decrease brightness.

4.3 Выбор прицельной сетки

The sight offers three reticle options: 3 MOA dot, 32 MOA circle, and 3 MOA dot with 32 MOA circle.

  • To cycle through reticle options, press and hold both the '+' and '-' buttons simultaneously for 3 seconds.
Diagram showing the three reticle options: a 3 MOA dot, a 32 MOA circle, and a 3 MOA dot within a 32 MOA circle.

Figure 3: Available reticle patterns for the Defender-ST.

4.4 Zeroing (Windage and Elevation)

Adjustments for windage and elevation are located on the side and top of the sight, respectively. Each click typically represents 1 MOA (Minute of Angle).

  • Регулировка высоты: Use the custom tool or a flathead screwdriver to turn the elevation turret (marked 'U' for Up) on top of the sight. Turning clockwise moves the point of impact down; counter-clockwise moves it up.
  • Регулировка ветра: Use the custom tool or a flathead screwdriver to turn the windage turret (marked 'R' for Right) on the right side of the sight. Turning clockwise moves the point of impact left; counter-clockwise moves it right.
Сторона view of the Vortex Defender-ST showing the windage adjustment screw on the right side, marked with 'R' and an arrow.

Figure 4: Windage adjustment location on the Defender-ST.

5. Техническое обслуживание

5.1 Очистка

Keep the lenses clean for optimal performance. Use the provided lens cloth or a soft, lint-free cloth.

  • Gently brush away any loose dirt or debris from the lenses.
  • Apply a small amount of lens cleaning solution to the cloth, not directly to the lens.
  • Протирайте линзы круговыми движениями, начиная с центра и двигаясь к краям.
  • Очистите корпус мягкой тряпкой.amp ткань по мере необходимости.

5.2. Замена батареи

Refer to section 3.1 for detailed battery installation instructions. Replace the CR2032 battery when the reticle dims or fails to illuminate.

6. Поиск Неисправностей

  • Сетка не подсвечивается: Check if the battery is correctly installed and has sufficient charge. Ensure the plastic separator tab has been removed.
  • Reticle Appears Distorted/Fuzzy: This can sometimes be due to astigmatism. Try adjusting the brightness settings. If the issue persists, consult an eye care professional.
  • Потеря нуля: Ensure all mounting screws are tightened to the manufacturer's recommended torque specifications. Check for any loose components on the firearm or mount.

7. Технические характеристики

ОсобенностьСпецификация
Название моделиDefender-ST Enclosed Solar Micro Red Dot Sight
АртикулDFST-MRD3-E
Тип сеткиMulti-Reticle (3 MOA Dot / 32 MOA Circle)
Цвет сеткиЯрко-красный
Настройки яркости12 (10 Daylight, 2 Night-Vision)
Тип батареиCR2032
ЗрачкаНеограниченный
Увеличение1x
Длина1.8 дюймов
Ширина1.3 дюймов
Высота1.2 дюймов
Вес товара1.6 унции
Материал7075 Алюминий
Совместимые устройстваFirearms with Picatinny Rail (DeltaPoint Pro footprint)
Тип крепленияPicatinny Mount (included)

8. Гарантия и поддержка

8.1 VIP Warranty

The Vortex Defender-ST is backed by the Vortex Unlimited, Unconditional, Lifetime, VIP Warranty. This is a fully transferable promise to repair or replace your item if it becomes damaged or defective. This warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder the product's performance.

For warranty service or support, please visit the official Vortex Optics webсайт или свяжитесь напрямую со службой поддержки клиентов.

Для получения более подробной информации посетите: Vortex Optics Official Webсайт

Связанные документы - DFST-MRD3-E

Предварительноview Увеличительное стекло Vortex Micro3X: руководство пользователя и руководство по установке
Подробное руководство пользователя увеличительного объектива Vortex Micro3X, в котором описываются установка, работа быстросъёмного крепления, регулировка высоты, фокусировка, уход за объективом и гарантия Vortex VIP. Оптимизировано для поисковых систем.
Предварительноview Vortex EBR-8 MOA Reticle Manual: Features, Usage, and Specifications
Comprehensive guide to the Vortex EBR-8 MOA reticle, detailing its first focal plane design, MOA subtensions, bullet drop compensation, ranging capabilities, and windage holds for accurate shooting.
Предварительноview Ручная настройка прицельной сетки Vortex Dead-Hold BDC MOA
Подробное руководство по использованию прицельной сетки Vortex Dead-Hold BDC MOA для точной компенсации падения пули и поправки на ветер при стрельбе на дальние дистанции.
Предварительноview Руководство по тактическому прицелу Vortex Diamondback EBR-2C MOA Reticle
Полное руководство по сетке EBR-2C MOA для тактического прицела Vortex Diamondback. Узнайте о сетке MOA, формулах расчёта дальности, поправках на превышение, горизонтальных поправках и упреждениях для движущихся целей, чтобы повысить точность стрельбы на дальние дистанции.
Предварительноview Руководство пользователя сетки Vortex Deadhold BDC для точной стрельбы
Подробное руководство по прицельной сетке Vortex Deadhold BDC, в котором подробно описывается классификация огнестрельного оружия, настройка, оценка дальности и баллистические таблицы для точной стрельбы на большие дистанции.
Предварительноview Vortex X10 ECU Installation and Operation Guide for Honda CRF250R 2022
Comprehensive installation and operation instructions for the Vortex X10 ECU, designed for the Honda CRF250R 2022 model. Covers ECU mounting, map selection, fuel trim adjustments, dynamic traction control, launch control, and TPS endpoint setting.