LEKATO 2-in-1 Drum Looper Pedal (Model BCUSM03626) Instruction Manual

1. Продукт закончилсяview

The LEKATO 2-in-1 Drum Looper Pedal is a versatile guitar effect pedal combining a high-sampling-rate looper with a built-in drum machine. It operates at 44.1 kHz, 24-bit, offering both looping and drum functions independently or simultaneously.

Рисунок 1: Передняя часть view of the LEKATO LP-02 2-in-1 Drum Looper Pedal, highlighting its dual functionality as a looper and drum machine.

2. Инструкции по настройке

2.1 Источник питания

This pedal requires a 9V DC negative-center power adapter (not included). Ensure the power supply provides less than 80 mA. Do not use a power supply with different specifications to avoid damage to the unit.

2.2 Связи

1. Подключите гитару или другой инструмент к В ВХОД Разъем находится с правой стороны педали.
2. Подключите V OUTPUT разъем на левой стороне педали к вашему ampусилитель или педаль эффектов Next.
3. Connect the 9V DC power adapter to the power input jack.

2.3 Buffer Bypass

The pedal features Buffer Bypass, which helps maintain signal strength over long cable runs or when using multiple pedals. This prevents tone loss that can occur due to cable capacitance in True Bypass systems.

Figure 2: Detail of the footswitch, indicating the Buffer Bypass functionality for signal integrity.

3. Операция

3.1 элементов управленияview

• LOOP Knob: Регулирует громкость воспроизведения записанного фрагмента.
• DRUM Knob: Регулирует громкость воспроизведения драм-машины.
• DRUM SELECT Knob: Selects one of the 8 available drum styles. This knob is analog and not notched, requiring careful adjustment to select the desired style.
• Педальный переключатель: A multi-function switch used for recording, playback, overdubbing, undo/redo, and tap tempo.
• Светодиодный индикатор: A single multi-colored LED indicates the pedal's status (e.g., recording, playing, overdubbing, drum tempo). Refer to the quick start guide for specific LED patterns and colors.

Figure 3: The three control knobs for adjusting loop volume, drum volume, and selecting drum styles.

3.2 Looper Module

The looper module offers up to 6 minutes of recording time and supports unlimited overdubs. Recorded tracks are automatically saved.

• Запись: Press the footswitch once to start recording. The LED will indicate recording status.
• Воспроизведение: Press the footswitch again to stop recording and start playback.
• Наложение: During playback, press the footswitch once to start overdubbing. Press again to stop overdubbing.
• Отменить/Повторить: Hold the footswitch for approximately 5 seconds to undo the last recorded layer. Repeat to redo.
• Стоп: Для остановки воспроизведения дважды нажмите на ножной переключатель.
• Прозрачный: While stopped, hold the footswitch for an extended period (e.g., 15 seconds as per some documentation, but often shorter in practice) to clear the entire loop.

Files can be exported or imported using dedicated software (refer to manufacturer's website for software details).

Figure 4: The looper module's key features, including its 6-minute loop capacity and data management options.

3.3 Drum Machine Module

The built-in drum machine features 8 musical styles, each with real drum samples. It includes a tap tempo function.

• Selecting Drum Style: Используйте DRUM SELECT knob to choose one of the 8 available drum styles (e.g., Blues, Rock, Pop, Country, Metal, Ballad, R&B, Dance).
• Нажмите Темп: While the drum machine is playing, tap the footswitch at your desired tempo to adjust the drum speed. The drum speed can also automatically match the tempo of a 4/4 time phrase when used with the looper.

Figure 5: The drum machine functionality, detailing the variety of grooves and real drum sampдоступные файлы.

4. Техническое обслуживание

• Поддерживайте чистоту педали, протирая её мягкой сухой тканью. Избегайте использования абразивных чистящих средств и растворителей.
• Храните педаль в сухом месте, вдали от экстремальных температур и влажности.
• Ensure all cable connections are secure before and after use.
• Всегда отключайте питание, если педаль не используется в течение длительного времени.

5. Поиск Неисправностей

5.1 Нет питания

• Ensure the 9V DC negative-center power adapter is correctly connected and functioning.
• Убедитесь, что розетка работает.

5.2 Нет звука

• Проверьте все соединения входных и выходных кабелей.
• Ensure the LOOP and DRUM volume knobs are not set to minimum.
• Test with different cables and an ampдля исключения проблем с внешним оборудованием.

5.3 Difficulty with Footswitch Functions

• The single footswitch performs multiple functions based on the number, duration, and order of presses. Refer to the 'Operation' section and practice the specific press sequences for recording, playback, overdub, undo/redo, and tap tempo.
• Consistent timing is crucial for accurate loop recording and drum tempo setting.

5.4 Unclear LED Indications

• The single multi-colored LED indicates various statuses. Consult the quick start guide or manufacturer's documentation for a detailed explanation of LED color and flash patterns.

6. Технические характеристики

Figure 6: Physical dimensions of the LEKATO 2-in-1 Drum Looper Pedal.

7. Гарантия и поддержка

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official LEKATO webсайт. Конкретные условия гарантии могут различаться в зависимости от региона и продавца.