1. Введение
Thank you for choosing the FREDEES Glass Door Display Cabinet. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your new cabinet. Please read these instructions carefully before beginning assembly and retain them for future reference.
Figure 1: FREDEES Glass Door Display Cabinet (Model QM-97020-02)
This image displays the front of the FREDEES Glass Door Display Cabinet. It features two upper doors with multiple glass panes, allowing visibility of items stored inside. Below the doors is an open storage compartment. The cabinet has a rustic brown finish and visible hardware on the corners and door hinges.
2. Информация по технике безопасности
ВНИМАНИЕ: Несоблюдение данных инструкций по технике безопасности может привести к травме или повреждению изделия.
- Для предотвращения царапин всегда собирайте шкаф на мягкой, чистой поверхности.
- Ensure all parts are present and undamaged before assembly. Do not proceed if any parts are missing or defective.
- Храните мелкие детали и упаковочные материалы в недоступном для детей и домашних животных месте.
- Use appropriate tools for assembly. Do not overtighten screws, as this may damage the material.
- For wall-mounted installation, ensure the wall can support the weight of the cabinet and its contents. Consult a professional if unsure.
- Always use the provided anti-tip hardware to secure the cabinet to the wall, even if it is not wall-mounted, to prevent tipping.
- Do not climb on or hang from the cabinet.
- Равномерно распределяйте вес по полкам, чтобы сохранить устойчивость.
3. Содержимое упаковки
Пожалуйста, убедитесь, что все перечисленные ниже компоненты входят в комплект поставки. Если какие-либо детали отсутствуют или повреждены, обратитесь в службу поддержки клиентов.
- Панели корпуса (верхняя, нижняя, боковые, задняя)
- Стеклянные двери (2)
- Регулируемая полка (1)
- Дверные петли и ручки
- Assembly Hardware (Screws, dowels, shelf pins, etc.)
- Wall Mounting Hardware (Screws, anchors, anti-tip kit)
- Руководство пользователя (Этот документ)
4. Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | СВОБОДНЫЕ |
| Название модели | 97020 |
| Номер модели товара | QM-97020-02 |
| Цвет | Коричневый |
| Размеры продукта (Д x Ш x В) | 7.1"Д x 23.62"Ш x 24.8"В |
| Вес товара | 19.95 фунта |
| Тип крепления | Настенное крепление |
| Стиль двери | Стеклянный фасад |
| Требуется сборка | Да |
| Специальная характеристика | Легкий |
Рисунок 2: Диаграмма размеров продукта
This diagram illustrates the precise measurements of the cabinet: 23.62 inches wide, 7.08 inches deep, and 24.8 inches high. It also details the internal shelf dimensions and door opening. The top shelf has a height of 7.1 inches, the middle shelf 7.1 inches, and the bottom open section 7.87 inches.
5. Сборка (Инструкция по установке)
Assembly is required for this cabinet. Please follow these general steps. Refer to the detailed assembly diagram included in your package for specific part identification and screw types.
- Подготовьте рабочее место: Clear a spacious, clean, and soft area to prevent damage to the cabinet parts during assembly.
- Определить части: Unpack all components and hardware. Compare them against the package contents list and the assembly diagram.
- Собрать раму: Attach the side panels to the top and bottom panels using the provided hardware (e.g., dowels and cam locks/screws). Ensure all connections are secure.
- Установка задней панели: Slide or fasten the back panel into place. This often adds rigidity to the structure.
- Прикрепите дверные петли: Secure the hinges to the cabinet frame and then to the glass doors.
- Двери крепления: Carefully attach the glass doors to the cabinet frame using the installed hinges. Adjust hinges as needed for proper door alignment.
- Установка дверных ручек: Attach the handles to the glass doors.
- Insert Shelf Pins: Place the adjustable shelf pins into the desired holes inside the cabinet.
- Установите регулируемую полку: Position the adjustable shelf onto the pins.
Note: Specific assembly steps and hardware may vary. Always consult the detailed assembly instructions provided in your product packaging.
6. Установка (настенный монтаж)
This cabinet is designed for wall mounting. Proper installation is crucial for safety and stability. It is recommended to have two people for wall mounting.
- Выберите место: Select a suitable wall location. Ensure there are no electrical wires or plumbing pipes behind the mounting area.
- Определите тип стены: Determine if your wall is drywall, plaster, concrete, or wood stud. This will dictate the type of anchors and screws needed.
- Отметьте точки крепления: Hold the assembled cabinet against the wall at the desired height. Use a level to ensure it is straight. Mark the positions for the mounting screws through the pre-drilled holes on the cabinet's back panel.
- Просверлите пилотные отверстия: Drill pilot holes at the marked locations. Use a drill bit appropriate for your wall type and the provided wall anchors.
- Вставьте анкеры в стену: If mounting into drywall or plaster, insert the appropriate wall anchors into the pilot holes.
- Крепление шкафа: Carefully lift the cabinet and align the mounting holes with the pilot holes/anchors. Insert and tighten the mounting screws until the cabinet is securely fastened to the wall. Do not overtighten.
- Установка комплекта защиты от опрокидывания: Even after wall mounting, it is essential to install the anti-tip kit. Attach one bracket to the top rear of the cabinet and the other to a wall stud or appropriate wall anchor. Connect them with the provided strap or cable, ensuring it is taut but not pulling the cabinet away from the wall.
Figure 3: Cabinet in use, wall-mounted
This image shows the FREDEES Glass Door Display Cabinet installed on a wall above a bathroom vanity. The glass doors are open, revealing neatly organized items such as folded towels, bottles of shampoo, and other toiletries. The open bottom shelf also holds various small items, demonstrating the cabinet's storage capacity and versatility.
7. Operating (Adjustable Shelf)
The FREDEES Glass Door Display Cabinet features an adjustable shelf, allowing you to customize the storage space to fit items of various heights.
- Опустошите полку: Remove all items from the adjustable shelf before attempting to move it.
- Удалите полку: Осторожно снимите полку с опорных штифтов.
- Переместить метки: Identify the desired new height for the shelf. Insert the shelf support pins into the corresponding holes on the cabinet side panels. Ensure the pins are level and securely seated.
- Вставьте полку обратно: Place the adjustable shelf onto the newly positioned support pins. Ensure it is stable and level before placing items back on it.
This flexibility allows you to store taller items like vases or books, or create more compact spaces for smaller collectibles.
8. Уход и обслуживание
To ensure the longevity and appearance of your FREDEES Glass Door Display Cabinet, follow these care instructions:
- Очистка деревянных поверхностей: Протрите деревянные поверхности мягкой тряпкой.amp cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the finish. Dry immediately with a clean cloth.
- Очистка стеклянных дверей: Use a standard glass cleaner and a lint-free cloth to clean the glass panels. Spray cleaner onto the cloth, not directly onto the glass, to prevent overspray onto wood surfaces.
- Удаление пыли: Regularly dust the cabinet with a soft, dry cloth to prevent buildup.
- Избегайте прямых солнечных лучей: Длительное воздействие прямых солнечных лучей может привести к выцветанию или изменению цвета древесного покрытия.
- Проверьте оборудование: Периодически проверяйте затяжку всех винтов и крепёжных элементов. При необходимости подтягивайте.
- Распределение веса: Always distribute weight evenly across shelves to prevent warping or instability.
9. Поиск Неисправностей
If you encounter any issues with your FREDEES Glass Door Display Cabinet, please refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Шкаф шатается или неустойчив. | Loose fasteners; uneven floor; improper wall mounting. | Ensure all screws are tightened. If on floor, use shims to level. Recheck wall mounting and anti-tip kit. |
| Двери не выравниваются и не закрываются должным образом. | Петли отрегулированы неправильно; каркас шкафа неровный. | Adjust the screws on the door hinges to align the doors. Ensure the cabinet frame was assembled squarely. |
| Полка неровная. | Shelf pins are not inserted correctly or are at different heights. | Remove the shelf and ensure both shelf pins are fully inserted into corresponding holes at the same height. |
| Царапины на поверхностях. | Improper cleaning; sharp objects. | Use soft cloths for cleaning. Avoid dragging items across surfaces. Minor scratches may be touched up with furniture repair markers. |
10. Гарантия и поддержка клиентов
FREDEES stands behind the quality of its products. While specific warranty details are not provided in this manual, please retain your proof of purchase. For any questions, missing parts, or assistance with assembly or installation, please contact FREDEES customer support through the retailer where the product was purchased or visit the official FREDEES webсайт.
Онлайн поддержка: Visit the FREDEES Store on Amazon
