Введение
The COROS Bike Cadence Sensor is designed to help cyclists track their pedaling RPMs (revolutions per minute) to improve pedaling efficiency. This sensor is compatible with both outdoor and indoor rides, including most spin bikes, and pairs seamlessly with bike computers, smartwatches, or smartphones via Bluetooth connectivity.
Что в коробке?
Открыв упаковку, вы найдете следующие компоненты:
- COROS Bike Cadence Sensor
- Крепление датчика
- Rubber Bands for mounting
- Краткое руководство пользователя
- Информация о безопасности продукта
Настройка и установка
1. Установка аккумулятора
The COROS Bike Cadence Sensor uses a CR2032 coin cell battery. Ensure the battery is correctly inserted before use. The battery compartment is typically located on the back of the sensor.
2. Установка датчика
The sensor is designed for easy installation on your bike's crank arm. Use the provided rubber bands to securely attach the sensor. Position the sensor on the non-drive side crank arm for optimal cadence tracking.
3. Сопряжение с устройствами
The COROS Bike Cadence Sensor connects via Bluetooth. To pair, activate the sensor by rotating the crank arm a few times. Then, open the settings on your compatible bike computer, smartwatch, or smartphone application and search for new Bluetooth devices. Select the COROS Cadence Sensor from the list to establish a connection. The sensor is not compatible with ANT+ devices.
Инструкция по эксплуатации
Once paired, the sensor will automatically begin tracking your pedaling RPMs when you start cycling. This data is transmitted in real-time to your connected device, allowing you to monitor and optimize your pedaling efficiency. The sensor works effectively for both outdoor rides and indoor training sessions, including use with most spin bikes.
Обслуживание
Срок службы батареи и ее замена
The CR2032 battery in your COROS Bike Cadence Sensor is designed to last up to 12 months under typical usage conditions. When the battery level is low, your connected device may display a notification. To replace the battery, carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up. Ensure the compartment is sealed tightly after replacement.
Чистка и водостойкость
The sensor has an IP67 water rating, providing protection against dust and temporary immersion in water. This makes it suitable for all-weather protection and durability. To clean the sensor, wipe it with a damp Ткань. Избегайте использования едких химикатов или абразивных материалов, которые могут повредить устройство.
Поиск неисправностей
- Датчик не подключается: Ensure the sensor has a fresh battery and is properly activated by rotating the crank arm. Check that Bluetooth is enabled on your receiving device and that the sensor is within range.
- Неточные показания: Verify that the sensor is securely mounted on the crank arm and is not obstructed. Ensure there are no strong electromagnetic interferences nearby.
- Батарея быстро разряжается: Confirm that the sensor is not left in an active state when not in use. Replace the battery if it is old or if the issue persists.
Технические характеристики
| Бренд | КОРОС |
| Название модели | COROS Bike Cadence Sensor |
| Цвет | Черный |
| Тип датчика | Датчик частоты вращения педалей |
| Технология связи | Bluetooth (Not compatible with ANT+ devices) |
| Тип крепления | Crank Arm Mount |
| Тип батареи | CR2032 Диоксид лития-марганца |
| Срок службы батареи | До 12 месяцев |
| Рейтинг воды | IP67 |
| Масса | 11 г |
| Размеры изделия (ДхШхВ) | 3.94 x 3.94 x 3.94 дюйма |
Гарантия и поддержка
The COROS Bike Cadence Sensor comes with a 1-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official COROS webПосетите их сайт или свяжитесь напрямую со службой поддержки клиентов. Сохраните чек о покупке для подтверждения гарантии.
