ULANZI HD02 10" Camera Magic Arm Super Clamp Набор

1. Введение

The ULANZI HD02 10" Camera Magic Arm Super Clamp Kit is a versatile mounting solution designed for photographers and videographers. It provides a secure and flexible way to attach cameras, monitors, lights, and other accessories to various surfaces. Constructed from durable aluminum alloy and stainless steel, this kit offers robust support and precise positioning for your equipment.

2. Что в коробке

Carefully unpack your ULANZI HD02 kit and ensure all components are present:

• 10-inch Magic Arm x 1
• супер клamp х 1

3.Основные характеристики

The ULANZI HD02 kit is engineered with several features to enhance your creative workflow:

• Heavy-Duty Load Capacity: Супер клamp and magic arm are constructed from premium aluminum alloy and stainless steel, supporting up to 3kg (6.61 lbs) of gear. Anti-slip rubber pads, a 1/4" screw, and anti-rotation locking mechanisms ensure stability for your DSLR camera, monitor, or light.
• Шаровая головка с поворотом на 360°: The smooth, 360° rotatable ball head allows for precise angle adjustments with independent locking knobs, facilitating seamless transitions between portrait and landscape orientations.
• Универсальная совместимость: Features multiple mounting options including 1/4"-20, 3/8"-16, ARRI locating pins, and a NATO clamp, enabling attachment to various equipment and surfaces like tripods, desks, and poles.
• Detachable & Portable Design: The kit is fully detachable for easy transport and storage. The 10-inch magic arm length is practical for overhead shots and hard-to-reach angles, while its compact design saves space.

4. Настройка и установка

Follow these steps to set up your ULANZI HD02 kit:

1. Соберите волшебную руку: The magic arm comes pre-assembled. Ensure all joints are tightened before use.
2. Attach the Super Clamp: Супер клamp can be attached to various surfaces. Twist the large knob at the bottom to open the clamp jaws. Position the clamp on a flat or round surface (22-87mm thickness/diameter) and tighten the knob until it is secure. The anti-slip rubber pads will help prevent movement.
3. Mount the Magic Arm to the Super Clamp: The magic arm typically connects to the super clamp via a 1/4"-20 screw or NATO rail. Align the appropriate mounting point and secure it firmly.
4. Подключите ваше устройство: Use the 1/4"-20 screw, 3/8"-16 screw, ARRI locating pins, or NATO clamp on the magic arm to attach your camera, monitor, or light. Ensure the device is securely fastened to prevent accidental drops.

5. Инструкция по эксплуатации

Once your equipment is mounted, you can adjust its position:

1. Регулировка манипулятора «Волшебная рука»: Loosen the central knob on the magic arm to adjust the angle and position of your attached device. The 360° ball heads at each end provide extensive flexibility.
2. Получение должности: Once the desired angle is achieved, tighten the central knob firmly to lock the magic arm in place. Ensure it is tight enough to prevent any slippage, especially with heavier loads.
3. Переключение ориентации: The ball head allows for quick switching between portrait and landscape orientations without needing to remount your device.

6. Техническое обслуживание

To ensure the longevity and optimal performance of your ULANZI HD02 kit, follow these maintenance guidelines:

• Уборка: Wipe the metal surfaces with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or rubber pads.
• Смазка: The moving parts are designed for smooth operation. Avoid applying lubricants unless specifically instructed by the manufacturer, as this could attract dust and debris.
• Хранилище: Store the kit in a dry, clean environment away from extreme temperatures and humidity. When not in use, it is recommended to detach the magic arm from the super clamp для компактного хранения.
• Инспекция: Periodically check all screws and joints for tightness. Ensure the rubber pads on the clamp are intact and free from damage to maintain grip.

7. Поиск Неисправностей

If you encounter issues with your ULANZI HD02 kit, refer to the following common problems and solutions:

• Problem: The clamp Не держится надежно.
  Решение: Убедитесь, что clamping surface is within the 22-87mm range. Tighten the large knob firmly. Check if the anti-slip rubber pads are clean and undamaged. If the pads are worn, contact ULANZI support for replacements.
• Problem: The magic arm slips or does not hold its position.
  Решение: Ensure the central locking knob on the magic arm is fully tightened. For heavier loads, ensure the arm is positioned to distribute weight effectively and avoid excessive leverage.
• Problem: Difficulty attaching a device to the 1/4"-20 screw.
  Решение: Verify that the device has a standard 1/4"-20 thread. Some devices may have a shallow thread, or the screw on the magic arm might be slightly long for certain setups. Consider using a small washer if the screw bottoms out before securing the device.
• Problem: The NATO clamp attachment is loose.
  Решение: Ensure the NATO rail on your accessory is properly aligned and the locking mechanism on the magic arm's NATO clamp полностью зафиксирован и затянут.

8. Технические характеристики

Detailed specifications for the ULANZI HD02 kit:

9. Гарантия и поддержка

The ULANZI HD02 10" Camera Magic Arm Super Clamp Kit is covered by a manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the official ULANZI webили обратитесь в службу поддержки напрямую. Сохраните чек в качестве подтверждения покупки.

Для получения дополнительной помощи посетите Официальный магазин ULANZI в США на Amazon..