Anweller MD168BC Keyless Entry Door Lock Instruction Manual

1. Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your Anweller MD168BC Keyless Entry Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: Anweller MD168BC Integrated Door Handle Set, highlighting features like passcode, app, RFID, key, emergency power, auto-lock, passage mode, and IP54 waterproof rating.

2. Информация по технике безопасности

• Перед установкой убедитесь, что все компоненты на месте и не повреждены.
• Do not attempt to disassemble or modify the lock, as this may void the warranty and compromise security.
• Keep mechanical keys in a safe place outside your home.
• При появлении индикатора низкого заряда батареи немедленно замените ее.
• Use only specified battery types (4 AA Alkaline batteries).

3. Содержимое упаковки

Убедитесь, что в комплект поставки входят все следующие предметы:

• 1 x Deadbolt Lock and Knob Handle Set (All Parts)
• 1 х Руководство пользователя
• Механические ключи 2 x
• 2 х RFID-карты

Изображение: Оверview of all components included in the Anweller MD168BC Keyless Entry Door Lock package.

4. Руководство по установке

Перед началом установки убедитесь, что ваша дверь соответствует следующим характеристикам:

• Door thickness: 1-3/8" to 2-1/8" (35mm to 55mm)
• Backset: 2-3/8" or 2-3/4" (60mm or 70mm)
• Distance between 2 door holes: 5-1/2" (140mm)
• Hole Diameter: > 1-17/20" (47mm)

Image: Door compatibility measurements for Anweller MD168BC lock.

Видео по установке

Пошаговая установка

1. Install Closed Bolt and Latch Bolt:
   Measure your door's thickness and lock body distance. If the lock body distance is 70mm, adjust the closed bolt by turning it 3/4. Align the door hole and insert the closed bolt, ensuring the 'UP' marking is at the top. Secure with screw 2. Repeat for the latch bolt.
   

   Image: Installing the closed bolt.

2. Install Front Panel Studs:
   Insert the studs into the front panel and tighten them with pliers to secure.
   

   Image: Installing front panel studs.
3. Установка передней панели:
   Pass the front panel power cord under the closed bolt and through the door hole. Rotate the lock ruler to a horizontal position. Align the lock ruler and square rod with the center of the closing bolt and latch bolt, then buckle them up.
   

   Image: Installing the front panel.

4. Install Rear Base Plate:
   After installing the base plate rubber gasket (arrow points up), press the edge buckle. Pass the power cord through the rear chassis and secure it with screw 1.
   

   Image: Installing the rear base plate.

5. Adjust Front and Rear Panels:
   Ensure the front and rear panels are vertically aligned. Tighten the screws again to secure the alignment.
   

   Image: Adjusting front and rear panels.
6. Install Square Pole:
   Insert the spring into the square rod, then put the square rod into the latch bolt core hole.
   

   Image: Installing the square pole.

7. Remove Rear Lock Battery Box Cover:
   Press the groove on the top of the rear panel to remove the battery cover.
   

   Image: Removing battery box cover.

8. Test Lock Sensitivity:
   Use pliers to hold the lock ruler. Twist to the right to lock, and to the left to unlock. Check for smooth rotation.
   

   Image: Testing lock sensitivity.
9. Установка задней панели:
   Connect the front lock power cord (note the front and back of the connector). Turn the locking knob from horizontal to vertical. Align the lock ruler and square rod, then install the rear panel. Tighten the rear lock No. 3 fixing screw.
   

   Image: Connecting power cord for rear panel installation.

10. Установите аккумулятор:
    Insert 4 AA alkaline batteries into the battery compartment. Close the battery cover.
    

    Image: Installing batteries.

11. Install Meson:
    Install the meson and tighten the meson screws.
    

    Image: Installing meson.

5. Инструкция по эксплуатации

The Anweller MD168BC offers four convenient ways to unlock your door:

• Пароль: Enter your programmed digital code on the keypad.
• Мобильное приложение: Use the dedicated mobile application for remote unlocking and management.
• RFID-карта: Tap the provided RFID card to the lock for quick access.
• Запасной ключ: Use the mechanical key as a traditional backup.

Image: Four unlocking methods for the Anweller MD168BC lock.

Основные характеристики:

• Пароль защиты от подглядывания: Введите случайные цифры до или после вашего фактического пароля, чтобы другие не смогли его угадать.
• Автоматическая блокировка: The lock can be set to automatically lock after a specified period.
• Режим прохождения: Temporarily disable auto-lock for continuous access, ideal for gatherings.
• Multiple PIN Code Types: Create admin codes, permanent codes, custom codes, one-time codes, recurring codes, and timed codes for various users.
• Управление мобильным приложением: Setup/delete passcodes, program/delete RFID cards, receive real-time unlocking reminders, check lock status and battery level.

6. Техническое обслуживание

Замена батареи:

The lock requires 4 AA alkaline batteries. The low power consumption design ensures approximately 180 days of battery life. The lock will provide a low battery reminder. In case of complete battery depletion, a power bank can be used for emergency power via the USB-C port.

Image: Battery compartment and battery life information.

Уборка:

Протрите поверхность замка мягкой тряпкой.amp Ткань. Избегайте использования абразивных чистящих средств и растворителей, которые могут повредить покрытие.

7. Поиск Неисправностей

• Замок не отвечает: Check battery levels and replace if necessary. Ensure the power cord connections are secure.
• Invalid entry alarm: The lock will shut down for 3 minutes after 5 invalid entry codes or RFIDs. Wait for the lockout period to end.
• Трудности с установкой: Refer to the installation video and step-by-step guide. Ensure all measurements and alignments are correct.
• Замок не включается/выключается плавно: Check for any obstructions in the door frame or latch mechanism. Ensure the square pole is correctly installed.

8. Технические характеристики

Image: Durability testing details for the Anweller MD168BC lock.

9. Гарантия и поддержка

Anweller provides a 12-month warranty for this product. Additionally, free lifetime technical support is available. For any queries, replacements, or refunds within the warranty period, please contact us via email.

Электронная почта: hongjdzwj@outlook.com