Anweller MD168 Keyless Entry Door Lock and Handle Set User Manual

1. Введение

This manual provides detailed instructions for the installation, operation, and maintenance of your Anweller MD168 Keyless Entry Door Lock and Handle Set. Please read this manual thoroughly before installation and use to ensure proper functionality and safety. The Anweller MD168 offers multiple convenient unlocking methods and advanced security features for your home.

Figure 1: Anweller MD168 Keyless Entry Door Lock and Handle Set with mobile app interface.

2. Продукт закончилсяview и компоненты

The Anweller MD168 is an integrated smart deadbolt and knob set designed for front doors. It features a robust construction and multiple access options. Below are the components included in your package:

• 1 x Deadbolt Lock and Knob Handle Set (All Parts)
• 1 х Руководство пользователя
• Механические ключи 2 x
• 2 х RFID-карты

Figure 2: Integrated design of the Anweller MD168, showcasing its zinc alloy material and oil-rubbed finish.

3. Руководство по установке

Before beginning installation, ensure your door meets the compatibility requirements. The distance between the two door holes must be 5-1/2 inches (140mm). Door thickness should be between 1-3/8 inches to 2-1/8 inches (35mm to 55mm). The hole diameter should be greater than 1-17/20 inches (47mm).

Figure 3: Door compatibility measurements for Anweller MD168 installation.

Step-by-Step Installation Video

Для наглядного руководства, пожалуйста, обратитесь к официальному видео по установке, представленному ниже:

Key Installation Steps (Refer to Video 1 for details):

1. Распакуйте и определите компоненты: (Video 0:07-0:20) Verify all parts listed in Section 2 are present.
2. Install Closed Bolt and Latch Bolt: (Video 0:21-1:13) Insert the closed bolt and latch bolt into the door edge, ensuring correct orientation and securing with screws.
3. Install Front Panel Studs: (Video 1:14-1:27) Attach the studs to the front panel of the lock.
4. Установка передней панели: (Video 1:28-1:45) Pass the power cord through the door hole and align the front panel with the lock ruler and square rod, then buckle them up.
5. Install Rear Base Plate: (Video 1:46-2:15) Secure the rubber gasket and rear base plate, passing the power cord through the chassis.
6. Adjust Front and Rear Panels: (Video 2:16-2:28) Ensure proper alignment of the front and rear panels and tighten all screws.
7. Install Square Pole: (Video 2:29-2:40) Insert the spring into the square rod and then place the square rod into the latch bolt core hole.
8. Remove Rear Lock Battery Box Cover: (Video 2:41-2:49) Press the groove on the top of the rear panel to remove the battery cover.
9. Test Lock Sensitivity: (Video 2:50-2:58) Use pliers to test the lock ruler's rotation for smooth operation (right to lock, left to unlock).
10. Установка задней панели: (Video 2:59-3:16) Connect the front lock power cord (ensure correct orientation) and align the lock ruler and square rod before installing the rear panel. Tighten the fixing screws.
11. Установите аккумулятор: (Video 3:17-3:26) Insert 4 AA batteries into the battery compartment and close the cover.
12. Install Meson: (Video 3:27-3:36) Install the meson and tighten its screws.

4. Операция

Методы разблокировки

The Anweller MD168 offers four distinct ways to unlock your door:

• Пароль: Enter a personalized code on the keypad.
• Мобильное приложение: Use the dedicated smartphone application for remote unlocking.
• RFID-карта: Tap a programmed RFID card to the lock.
• Запасной ключ: Utilize traditional mechanical keys as a backup.

Figure 4: The four convenient unlocking methods available for the Anweller MD168.

Управление мобильным приложением

The mobile application provides extensive control over your smart lock:

• Управление паролями: Set up, modify, or delete passcodes.
• RFID Card Programming: Program or delete RFID cards.
• Журнал активности: View real-time unlocking reminders and historical records.
• Auto-Lock & Passage Mode: Configure automatic locking times and enable passage mode for temporary unrestricted access.
• Регулятор громкости: Adjust the alarm volume (mute, low, medium, high).
• Проверка статуса: Monitor the lock's status and battery level.

Рисунок 5: Болееview of the convenient mobile app control features.

Функции безопасности

• Пароль защиты от подглядывания: Enter random digits before or after your actual passcode to obscure it from onlookers.
• Неправильный лимит входа: The lock will temporarily disable for 3 minutes after 5 consecutive invalid passcode or RFID entries, and an alarm will be triggered.
• Tamper Тревога: A built-in alarm system activates if tampering is detected, providing an additional layer of security.

Figure 6: The anti-peeping passcode feature for enhanced security.

Figure 7: Visual representation of the lock's pick-resistant and alarm capabilities.

Режимы

• Автоматическая блокировка: The lock can be configured to automatically secure the door after a set period of time.
• Режим прохождения: This mode allows the door to remain unlocked for continuous access, suitable for gatherings or when frequent entry/exit is required.

Figure 8: The Auto Lock feature for automatic door security.

Figure 9: The Passage Mode for temporary unrestricted access.

5. Техническое обслуживание

• Замена батареи: The lock requires 4 AA batteries. Replace them when the low battery reminder is activated.
• Аварийное питание: In case of complete battery depletion, the lock can be temporarily powered via a USB-C power bank for emergency unlocking.
• Уборка: Очистите внешнюю поверхность замка мягкой тряпкой.amp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the finish and electronic components.

Figure 10: Battery compartment for 4 AA batteries, providing up to 180 days of power.

6. Поиск Неисправностей

If you encounter issues with your Anweller MD168 smart lock, consider the following:

• Блокировка не отвечает: Проверьте правильность установки батарей и их достаточный заряд. При необходимости замените батареи.
• Incorrect Passcode Entry: Ensure you are entering the correct passcode. Remember the anti-peeping feature allows extra digits before or after the actual code. If 5 incorrect attempts are made, the lock will temporarily disable.
• Проблемы с подключением приложения: Ensure Bluetooth is enabled on your smartphone and you are within range of the lock. Restart the app or your phone if problems persist.
• Аварийная разблокировка: If the battery is completely dead, use the mechanical key or connect a USB-C power bank to the emergency power port.

Для получения дополнительной помощи обратитесь в службу поддержки клиентов.

7. Технические характеристики

8. Гарантия и поддержка

Anweller is committed to providing high-quality products and excellent customer service.

• Гарантия: На этот продукт распространяется гарантия 12 месяцев с даты покупки.
• Техническая поддержка: Free lifetime technical support is available for all Anweller MD168 users.
• Контакт: For any queries, technical assistance, or warranty claims, please contact us via email at hongjdzwj@outlook.com.