Важная информация по безопасности
Внимательно прочтите данное руководство перед установкой и использованием. Сохраните это руководство для дальнейшего использования.
- Грузоподъемность: Не превышайте максимально допустимую нагрузку в 15 кг (33 фунтов). Превышение этого предела может привести к серьёзным травмам или материальному ущербу.
- Размер монитора: The monitor arm supports monitors up to 42 inches. The VESA extender supports monitors from 17 to 35 inches. Ensure your monitor's size and weight are within these limits.
- VESA-совместимость: The arm supports VESA patterns 75x75mm and 100x100mm. The extender converts these to 200x100mm and 200x200mm. Verify your monitor's VESA pattern before installation.
- Толщина стола: C-clamp requires a desk thickness between 0.39 inches (10mm) and 2.76 inches (70mm). Ensure your desk can support the combined weight of the arm, monitor, and extender.
- Сборка: Assemble the product according to the instructions. Improper assembly may cause damage or serious personal injury.
- Движущиеся части: This product contains moving parts. Exercise caution during adjustment to avoid pinching or crushing injuries.
- Обслуживание: Periodically check all screws and connections to ensure they are secure. Retighten as necessary.
Содержимое упаковки
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, please contact MOUNTUP customer support.
- Сборка кронштейна монитора
- C-Clamp База
- VESA Extender Bracket (2 pieces)
- VESA Extender Plate
- Комплект крепежных элементов (винты, шайбы, прокладки, шестигранные ключи)
Изображение: Оверview of the MOUNTUP Heavy Duty Single Monitor Arm, including the main arm, C-clamp, and the VESA extender components.
Технические характеристики
| Бренд | ПОДНЯТЬСЯ |
| Модель | Heavy Duty Single Monitor Arm with VESA Extender |
| Monitor Arm Compatibility | Monitors up to 42 inches |
| VESA Extender Compatibility | Monitors 17-35 inches |
| Грузоподъемность | 4.4 - 33 фунтов (2 - 15 кг) |
| VESA Patterns (Arm) | 75x75мм, 100x100мм |
| VESA Patterns (Extender) | Converts to 200x100mm, 200x200mm, 150x150mm, 100x200mm |
| Толщина стола (C-Cl)amp) | 0.39 - 2.76 дюйма (10 - 70 мм) |
| Диапазон высот | 9.3 - 22.1 дюймов |
| Максимальное расширение | 23.8 дюймов |
Image: Illustration highlighting the monitor arm's robust load capacity of up to 33 lbs.
Image: Diagram showing the monitor arm's height adjustment range from 9.3 to 22.1 inches and a maximum extension of 23.8 inches.
Настройка и установка
Step 1: Install the C-Clamp База
- Поместите C-clamp основание на краю вашего стола.
- Ensure the desk thickness is between 0.39 and 2.76 inches.
- Затяните C-clamp screw until the base is securely fastened to the desk. Do not overtighten.
Image: The monitor arm's C-clamp securely attached to a desk, demonstrating its stable mounting.
Image: A visual comparison highlighting the wider and more stable design of the MOUNTUP C-clamp compared to a standard clamp.
Step 2: Assemble the VESA Extender (if needed)
If your monitor has a VESA pattern larger than 100x100mm (e.g., 200x100mm or 200x200mm), use the VESA extender bracket.
- Attach the two extender brackets to the VESA extender plate using the provided screws. Ensure the ridge on the extender plate aligns with the brackets for a secure fit.
- Securely fasten the extender assembly to your monitor's VESA mounting holes using the appropriate screws from the hardware kit.
Image: Step-by-step visual guide for assembling the VESA extender brackets onto the main plate using screws.
Изображение: Подробный view of the VESA extender plate, showing its design for adapting to various VESA patterns.
Image: A diagram illustrating the various VESA patterns (200x100mm, 150x150mm, 200x200mm, 100x200mm) supported by the extender.
Image: A visual comparison showing a monitor that previously could not be mounted (before) and how the VESA extender enables mounting for larger VESA patterns (after).
Step 3: Attach Monitor to Arm
- Slide the monitor (with or without the VESA extender attached) onto the VESA head of the monitor arm.
- Secure the monitor to the VESA head using the provided screws. Ensure all screws are tightened to prevent the monitor from detaching.
Инструкция по эксплуатации
Регулировка положения монитора
The MOUNTUP monitor arm allows for flexible adjustment of your monitor's position to achieve optimal ergonomics.
- Регулировка высоты: Gently push or pull the monitor up or down to the desired height. The gas spring mechanism will hold it in place.
- Регулировка наклона: Tilt the monitor screen up or down to reduce glare and find a comfortable viewугол наклона.
- Регулировка поворота: Rotate the monitor horizontally (left or right) to share your screen or change viewнаправление.
- Регулировка вращения: Поверните монитор на 360 градусов, чтобы переключаться между альбомной и портретной ориентацией.
Регулировка натяжения
If the monitor arm is too stiff or too loose, you may need to adjust the gas spring tension.
- Locate the tension adjustment screw on the arm (usually near the pivot points).
- Use the provided Allen wrench to turn the screw:
- Повернуть по часовой стрелке (-) к уменьшать tension (for lighter monitors or if the arm is too stiff).
- Повернуть против часовой стрелки (+) к увеличивать tension (for heavier monitors or if the arm sags).
- Adjust gradually and test the arm's movement after each adjustment until it holds your monitor securely at any position.
Обслуживание
- Уборка: Wipe the monitor arm and VESA extender with a soft, damp Ткань. Избегайте использования абразивных чистящих средств и растворителей, которые могут повредить покрытие.
- Периодические проверки: Regularly inspect all screws and connections (C-clamp, VESA plate, arm joints) to ensure they remain tight. Retighten any loose fasteners to maintain stability and safety.
- Смазка: Газовый пружинный механизм не требует технического обслуживания и смазки.
Поиск неисправностей
Monitor Sags or Does Not Hold Position
- Решение: The gas spring tension is likely too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise (+) with the provided Allen wrench until the arm can hold the monitor in place.
- Контрольный вес: Ensure your monitor's weight is within the 4.4 - 33 lbs capacity.
Arm is Too Stiff to Move
- Решение: The gas spring tension is likely too high. Decrease the tension by turning the adjustment screw clockwise (-) with the provided Allen wrench.
Monitor Wobbles
- Решение: Check if the C-clamp is securely tightened to the desk. Ensure all VESA mounting screws are tight. Verify that the monitor arm joints are properly secured.
- Устойчивость стола: Ensure your desk itself is stable and not prone to wobbling.
Гарантия и поддержка
MOUNTUP products are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official MOUNTUP webсайт.
If you encounter any issues or have questions regarding the installation or operation of your MOUNTUP Heavy Duty Single Monitor Arm and VESA Extender, please contact MOUNTUP customer support for assistance.
Контактная информация: Please refer to your product packaging or the MOUNTUP official webсайт для получения самых актуальных контактных данных службы поддержки клиентов.
