Lyman Accu-Prime Manual Bench Priming Tool Instruction Manual

Введение

This manual provides detailed instructions for the safe and effective use, setup, operation, maintenance, and troubleshooting of your Lyman Accu-Prime Manual Bench Priming Tool. Please read this manual thoroughly before operating the tool to ensure proper function and longevity.

Информация по безопасности

Always wear appropriate eye protection when operating this tool. Keep fingers clear of moving parts. Ensure the tool is securely mounted before use. Store primers and ammunition components safely and according to manufacturer guidelines.

Содержимое упаковки

При распаковке убедитесь, что все компоненты присутствуют:

• Lyman Accu-Prime Bench Priming Tool assembly
• Small primer punch
• Large primer punch
• Small primer tray
• Large primer tray
• Монтажное оборудование (винты)
• Руководство по эксплуатации (данный документ)

Image: The Lyman Accu-Prime Manual Bench Priming Tool, showing its robust construction and how a brass case is positioned for priming.

Настраивать

1. Монтаж инструмента:

   Select a sturdy workbench or surface for mounting. Position the Accu-Prime tool and mark the locations for the two mounting screws. Drill pilot holes if necessary. Securely fasten the tool to the workbench using the provided mounting hardware. Ensure the tool is stable and does not wobble during operation.

   

   Image: The Accu-Prime tool securely mounted to a surface, highlighting the lever mechanism and base plate.

2. Selecting the Correct Primer Punch and Tray:

   The Accu-Prime tool comes with both small and large primer punches and trays. Identify the size of the primers you will be seating (Small Pistol/Rifle or Large Pistol/Rifle). Insert the corresponding primer punch into the tool's ram. Place the correct primer tray onto the tool's base, ensuring it clicks into place.

   

   Изображение: крупный план view of the Accu-Prime's top mechanism, illustrating where the primer punch is inserted and the primer tray attaches.

Инструкция по эксплуатации

1. Loading Primers:

   Pour a small quantity of primers into the selected primer tray. Gently shake the tray to orient the primers anvil-side up. The tray is designed to automatically feed primers into the priming mechanism.

   

   Image: The Accu-Prime tool set up on a workbench, demonstrating the typical reloading environment with primers and brass cases ready for processing.
2. Priming a Case:

   Place a clean, decapped brass case onto the shell holder. Ensure the case is seated firmly. Slowly lower the operating lever. As the lever descends, a primer will be picked up from the tray and seated into the primer pocket of the case. Apply steady, even pressure until the primer is fully seated. You should feel a distinct "bottoming out" sensation, indicating the primer is flush or slightly below the case head.

   

   Изображение: Подробный view of the priming process, showing a brass case being precisely primed by the Accu-Prime tool.

3. Inspecting Primers:

   After seating, remove the case and visually inspect the primer. It should be seated squarely and to the correct depth. An improperly seated primer can lead to misfires or other safety issues.

Обслуживание

• Уборка:

  Regularly clean the tool to remove primer residue and other debris. Use a soft cloth and a mild solvent if necessary. Ensure all moving parts are free of obstructions.

• Смазка:

  Apply a light coat of gun oil or similar lubricant to the pivot points and ram of the tool periodically to ensure smooth operation. Avoid over-lubrication, which can attract dirt.
• Хранилище:

  When not in use, store the Accu-Prime tool in a clean, dry environment to prevent rust and corrosion. It is recommended to remove primer trays and punches for separate storage.

Note: The product's general care instructions mention "Hand Wash Only". For this metal tool, interpret this as cleaning with care using appropriate solvents and cloths, avoiding submersion in water.

Поиск неисправностей

Технические характеристики

• Номер модели: 7770075
• Производитель: Лиман
• Тип продукта: Manual Bench Priming Tool
• Совместимость: Small and Large Pistol/Rifle Primers
• Размеры (приблизительные): 7 x 5 x 2 дюйма (размеры упаковки)
• Вес (приблизительный): 1 Pound (Package Weight)
• Материал: Прочная металлическая конструкция
• Источник: Сделано в США или импортировано

Информация о гарантии

Lyman products are manufactured to high standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Lyman webСохраните чек о покупке для предъявления гарантийных претензий.

Поддержка клиентов

For technical assistance, replacement parts, or further inquiries, please contact Lyman Customer Service. Contact information can typically be found on the official Lyman webсайте или на упаковке продукта.

Lyman Official Webсайт: www.lymanproducts.com