1. Введение
Thank you for choosing the CREWORKS 2L Ultrasonic Cleaner. This device is designed to provide efficient and thorough cleaning for a wide range of items, including jewelry, glasses, watches, and various small parts. Utilizing ultrasonic waves, it offers a superior cleaning experience compared to traditional methods, reaching intricate surfaces and tight corners. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new ultrasonic cleaner.
Image: The CREWORKS 2L Ultrasonic Cleaner, highlighting its ability to eliminate cleaning difficulties for various items.
2. Инструкции по технике безопасности
Please read all safety instructions carefully before operating the unit.
- Не разбирать. the unit. Unauthorized disassembly may lead to electric shock or damage to the device.
- Не используйте без присмотра. Always supervise the cleaner during operation.
- Убедитесь, что есть sufficient fluid in the tank before operation. Operating without adequate fluid can damage the ultrasonic transducer.
- Unplug the unit before filling or draining the tank to prevent electrical hazards.
- Keep the unit away from water sources and do not immerse the main body in water.
- Не прикасайтесь к вилке электропитания мокрыми руками.
- Хранить в недоступном для детей месте.
- Use only appropriate cleaning solutions. Do not use flammable, corrosive, or abrasive liquids.
- Ensure proper ventilation during use, especially if using specialized cleaning solutions.
Image: The ultrasonic cleaner showing the warning label on the lid, emphasizing critical safety precautions.
3. Продукт закончилсяview
The CREWORKS 2L Ultrasonic Cleaner features a durable stainless steel tank and an intuitive control panel. Familiarize yourself with the components:
- Бак из нержавеющей стали: The main reservoir for cleaning solution and items.
- Панель управления: Features knobs for temperature and time settings, and toggle switches for cleaning modes.
- Ручка контроля температуры: Adjusts heating temperature from 70°F to 210°F.
- Ручка управления временем: Sets cleaning duration from 1 to 30 minutes.
- Переключатели режимов: Select between 'Semi-Wave' (Gentle) and 'Full Wave' (Standard) ultrasonic cleaning, and 'Degas' function.
- Цифровой дисплей: Отображает текущую температуру или оставшееся время.
- Ручки: Встроенные ручки для удобной переноски.
- Крышка: Helps contain splashes and reduce noise during operation.
- Корзина для уборки: A removable basket for holding items during cleaning, preventing them from resting directly on the tank bottom.
Image: The ultrasonic cleaner positioned on a kitchen counter, highlighting its user-friendly control knobs for time and temperature.
4. Настройка
- Распаковать: Аккуратно извлеките ультразвуковой очиститель и все принадлежности из упаковки.
- Размещение: Place the unit on a stable, flat, and dry surface, ensuring adequate ventilation around the machine.
- Заполнить бак: Ensure the unit is unplugged. Fill the stainless steel tank with an appropriate cleaning solution. Do not exceed the maximum fill line. The fluid level should be sufficient to cover the items to be cleaned.
- Вставить корзину: Place the cleaning basket into the tank.
- Подключите питание: Подключите шнур питания к заземленной электрической розетке.
5. Инструкция по эксплуатации
Follow these steps to operate your ultrasonic cleaner:
- Подготовьте предметы: Place the items to be cleaned into the cleaning basket. Ensure items are not overcrowded and are fully submerged in the cleaning solution.
- Закрыть крышку: Securely close the lid of the ultrasonic cleaner.
- Установить температуру (необязательно): Turn the Temperature Control Knob to your desired temperature (70-210°F). The built-in heater will begin warming the solution. Heating speeds up the cleaning process for certain contaminants.
- Выберите режим:
- Degas Mode: Toggle the 'Degas' switch to ON. This mode quickly removes dissolved gases from the cleaning solution, enhancing cavitation efficiency and preventing oxidation of cleaned objects. Run for 1-2 minutes before cleaning, especially with fresh solution.
- Gentle Mode (Semi-Wave): For delicate items like circuit boards, certain jewelry, or fragile surfaces, toggle the 'Semi-Wave' switch to ON. This halves the ultrasonic power, providing a gentler cleaning action.
- Standard Mode (Full Wave): For general cleaning and stubborn grime, ensure the 'Full Wave' switch is ON (and 'Semi-Wave' is OFF). This utilizes the full ultrasonic power.
Image: Visual explanation of the Degassing Mode, which removes gases for better cavitation, and the Gentle Mode, which reduces cleaning intensity for delicate items.
- Установить время: Turn the Time Control Knob to your desired cleaning duration (1-30 minutes). The digital display will show the countdown.
- Начать очистку: The unit will automatically start the cleaning process once the time is set. Ultrasonic waves will generate cavitation bubbles that dislodge dirt and grime.
- Заканчивать: Once the timer reaches zero, the cleaning cycle will stop. Unplug the unit before removing items.
- Полоскание предметов: Carefully remove the basket and rinse the cleaned items under clean water to remove any remaining solution or loosened debris. Dry thoroughly.
Image: Demonstrates the visible cleaning effect with before-and-after comparisons of eyeglasses, a razor, and a circuit board.
6. Техническое обслуживание
Proper maintenance ensures the longevity and optimal performance of your ultrasonic cleaner:
- Осушение: After each use, especially if the solution is dirty, unplug the unit and carefully drain the cleaning solution.
- Очистка резервуара: Wipe the inside of the stainless steel tank with a soft cloth. For stubborn residue, use a mild, non-abrasive cleaner. Rinse thoroughly with clean water and dry completely.
- Внешняя очистка: Протрите внешнюю часть агрегата рекламой.amp Ткань. Не используйте едкие химикаты и не погружайте устройство в воду.
- Хранилище: Store the cleaner in a cool, dry place away from direct sunlight and moisture when not in use. Ensure the tank is empty and dry.
- Регулярный осмотр: Периодически проверяйте шнур питания на наличие повреждений. При обнаружении повреждений прекратите использование и обратитесь в службу поддержки клиентов.
7. Поиск Неисправностей
If you encounter issues with your CREWORKS Ultrasonic Cleaner, refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Аппарат не включается. | No power supply; Power cord not properly connected; Unit malfunction. | Check power outlet and cord connection. Ensure the power switch is ON. If problem persists, contact customer support. |
| Эффективность очистки низкая. | Insufficient cleaning solution; Incorrect cleaning solution; Overcrowded items; Degas mode not used; Too short cleaning time. | Ensure items are fully submerged. Use appropriate solution for items. Do not overcrowd. Use Degas mode for new solutions. Increase cleaning time. |
| Необычный шум во время работы. | Unit not on a stable surface; Tank empty or insufficient fluid; Foreign object in tank. | Place on a stable surface. Ensure sufficient fluid. Check for and remove any foreign objects. |
| Функция обогрева не работает. | Temperature knob not set; Heater malfunction. | Ensure temperature knob is set to a desired temperature. If problem persists, contact customer support. |
If the issue persists after trying these solutions, please contact CREWORKS customer support for further assistance.
8. Технические характеристики
| Особенность | Спецификация |
|---|---|
| Модель | B0CZNX678Q |
| Бренд | КРЕВЕРКИ |
| Объем бака | 2 литра (0.5 галлона) |
| Ультразвуковая мощность | 60 Вт |
| Мощность нагрева | 100 Вт |
| Ультразвуковая частота | 40 кГц |
| Диапазон таймера | 1-30 минуты |
| Диапазон температур | 70–210°F (20–99°C) |
| Материал бака | 304 Нержавеющая сталь |
| Габаритные размеры | 6.9 х 6.5 х 8.1 дюйма (прибл.) |
| Размеры резервуара | 5.9 х 5.3 х 3.9 дюйма (прибл.) |
| Масса | 5.4 фунтов (приблизительно) |
Image: Detailed specifications including the dimensions of the ultrasonic cleaner unit, its internal tank, and the cleaning basket.
9. Гарантия и поддержка
CREWORKS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official CREWORKS website. You may also contact customer service via the contact information provided on your purchase receipt or the product packaging.
Производитель: КРЕВЕРКИ
Дата первой доступности: 6 июня 2024 г.
