Руководство пользователя автоматической системы полива RAINPOINT

Введение

The RAINPOINT Automatic Watering System is designed to provide efficient and convenient irrigation for your indoor plants and balcony gardens. This system automates watering tasks, ensuring your plants receive optimal hydration with minimal effort. It features adjustable water volume, dual power options, and a user-friendly interface.

Figure 1: RAINPOINT Automatic Watering System connected to several potted plants, demonstrating its application.

Содержимое упаковки

Перед началом установки убедитесь, что все перечисленные ниже компоненты присутствуют в вашем комплекте:

• 1 x Rainpoint Water Pump
• 1 x 10m Hoses (Tubing)
• 10 x Micro Droppers (Drip Emitters)
• 10 x Water Flow Control Valves (Switch Valves)
• 10 x T-Connectors (T Barb Fitting)
• 3 x Straight Connectors (Straight Barb Fitting)
• 3 x Cross Connectors (Cross Barb Fitting)
• 3 x Sealing Plugs (Tubing End Caps)
• 1 х Фильтр
• 1 x Check Valve (Anti-siphon device)
• 1 х USB-кабель для зарядки
• 1 x Hook
• 1 х Руководство по эксплуатации

Figure 2: Visual representation of all components included in the RAINPOINT Automatic Watering System kit.

Настройка и установка

The RAINPOINT Automatic Watering System is designed for straightforward installation. Follow these steps to set up your system:

1. Prepare the Water Source: Place the main pump unit with its intake filter into a suitable water reservoir (e.g., a bucket or large container). Ensure the water level is sufficient for your watering needs.
2. Подключить трубку: Attach the 10-meter hose to the pump's outlet.
3. Distribute Tubing and Connectors: Route the tubing to your plants. Use the T-connectors, straight connectors, and cross connectors to create a network that reaches all desired plants. Cut the tubing to appropriate lengths for each connection.
4. Install Micro Droppers and Flow Control Valves: For each plant, insert a micro dropper into the end of a tubing segment. Attach a water flow control valve to each micro dropper. This allows for individual adjustment of water delivery to each plant.
5. Безопасная трубка: Use the provided hook to secure the main pump unit to the edge of your water reservoir. Ensure all connections are snug to prevent leaks.
6. Install Anti-Siphon Device: Integrate the check valve (anti-siphon device) into the tubing line to prevent water backflow and siphoning, which can lead to unintended water drainage.


Figure 3: Proper installation of the anti-siphon valve to prevent water leakage and ensure system integrity.

7. Power the Unit: Insert 4 AA batteries (not included) into the battery compartment or connect the system using the provided USB cable. For uninterrupted operation, both power sources can be used simultaneously.


Figure 4: The system supports dual power supply via USB cable or 4 AA batteries for continuous operation.

Инструкция по эксплуатации

The RAINPOINT system offers both automatic and manual watering modes.

Автоматический полив

To set up an automatic watering schedule:

1. Установить продолжительность полива: Use the control buttons on the device to select how long the system will water during each cycle. The duration can be set from 20 seconds to 30 minutes.
2. Установите частоту полива: Choose how often the system will water. Options range from every 1 hour to every 7 days.
3. Set Delay Time (Optional): If needed, you can set a delay time from 1 to 24 hours before the first watering cycle begins.
4. Confirm settings by pressing the "OK" button. The large LED display provides clear readability of your programmed schedule.

Figure 5: The control panel allows setting watering duration (20s-30min) and frequency (1hr-7days) for automatic operation.

Регулируемый поток воды

Each micro dropper is equipped with a flow control valve, allowing you to precisely adjust the water volume delivered to individual plants. This ensures each plant receives the optimal amount of water based on its specific needs.

Figure 6: Adjust the blue valve on each dropper to control water flow, ensuring customized hydration for each plant.

Ручной полив

To initiate manual watering at any time, simply press and hold the "OK" button on the device. The system will water for a duration between 20 seconds and 30 minutes, without affecting your pre-programmed automatic schedule.

Figure 7: Manual watering can be activated by pressing and holding the "OK" button, providing immediate hydration.

Обслуживание

Regular maintenance ensures the longevity and optimal performance of your RAINPOINT Automatic Watering System.

• Очистите фильтр: Periodically check and clean the intake filter to prevent blockages and ensure consistent water flow.
• Inspect Tubing and Droppers: Regularly inspect all tubing and micro droppers for kinks, blockages, or damage. Clear any debris that may accumulate in the droppers.
• Резервуар для воды: Keep the water reservoir clean and free of algae or sediment to prevent system contamination.
• Проверка батареи: If using batteries, check their charge level periodically and replace them as needed to avoid interruptions in watering.

Поиск неисправностей

If you encounter issues with your RAINPOINT Automatic Watering System, refer to the following common problems and solutions:

Технические характеристики

Figure 8: The system is capable of watering up to 10 pots with a flow rate of 24L/H and a pump height of 3m.

Гарантия и поддержка

RAINPOINT offers a 36-month replacement offer for this product. For technical support, warranty claims, or any inquiries, please contact RAINPOINT customer service through the following channels:

• Webсайт: www.rainpointonline.com/pages/support
• Электронная почта: service@rainpointonline.com
• Горячая линия в США: +1 833-381-5659 (EN)
• DE Hotline: +49 800-182-0576 (EN, DE)
• UK Hotline: +44 800-808-5337 (EN)
• WhatsApp: +1626-780-5952

Figure 9: Contact information for RAINPOINT customer support and warranty services.