1. Введение
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP Freelift Pro Dual Monitor Mount. Please read this guide thoroughly before installation to ensure correct setup and safe usage. This monitor mount is designed to enhance your workspace ergonomics and free up desk space by securely holding two monitors.
2. Информация по технике безопасности
- Перед сборкой убедитесь, что все компоненты присутствуют и не повреждены. Не используйте изделие, если какие-либо детали отсутствуют или имеют дефекты.
- Follow all assembly steps carefully. Incorrect installation may result in product damage or personal injury.
- Не превышайте максимальную грузоподъемность в 22 фунтов (10 кг) на каждую руку.
- Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitors.
- Do not install on tempered glass table tops.
- Не допускайте детей и домашних животных к месту установки.
3. Содержимое упаковки
Убедитесь, что все перечисленные ниже детали входят в комплект поставки:
- Основной столб и основание
- Dual Gas Spring Arms
- Крепежные пластины VESA (2 шт.)
- C-Clamp Сборка
- Сборка основания втулки
- Комплект крепежа (винты, шайбы, прокладки)
- Шестигранные ключи (различных размеров)
- Зажимы для прокладки кабелей
Refer to the 'Package List' section in the installation video for a visual guide to all included components.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates the unboxing and initial setup steps, including a visual overview всех частей.
4. Настройка
4.1 Choose Mounting Type
The MOUNTUP Freelift Pro offers two installation options: C-Clamp or Grommet Mount. Select the method best suited for your desk.
- C-Clamp Устанавливать: For desk thickness within 0.39''-2.76''.
- Крепление с помощью втулки: For desk thickness within 0.39''-2.76'' and hole diameter within 0.39''-2.36''.
Image: Two Installation Options - Illustrates the C-clamp and grommet mounting methods with desk thickness and hole diameter specifications.
4.2 Base Installation (C-Clamp или люверс)
Follow the instructions in the video for your chosen mounting type:
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates both C-clamp and grommet base installation steps from 0:03 to 0:34.
4.3 Arm Installation
Attach the gas spring arms to the installed base as shown in the video.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates arm installation from 0:35 to 0:45.
4.4. Прикрепите пластину VESA к монитору.
Secure the VESA plate to the back of your monitor using the provided screws. Ensure the plate is firmly attached.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates attaching the VESA plate to the monitor from 0:46 to 0:51.
4.5 Slide Monitor onto Arm
Carefully slide the monitor (with attached VESA plate) onto the arm's mounting head until it clicks into place. Secure it with the locking knob.
Image: Quick Release VESA Plate - Shows the quick-release VESA plate mechanism for easy monitor attachment and removal.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates sliding the monitor onto the arm from 0:52 to 0:56.
5. Инструкция по эксплуатации
5.1 Регулировка положения монитора
The Freelift Pro Dual Monitor Mount offers full motion adjustment for optimal viewкомфорт:
- Наклон: от +85° до -45°
- Поворотный: 180° (at VESA plate), 360° (at arm joint), 270° (at base joint)
- Вращение: 360° (portrait to landscape)
- Регулировка высоты: Max height up to 17.3 inches (from desk surface)
- Расширение: Each arm extends up to 21 inches
Image: Freely Position Your Screen - Highlights the maximum height and extension capabilities of the monitor arms.
Image: Optimize Your View - Demonstrates the swivel, height, tilt, and rotation ranges for flexible monitor positioning.
Image: Full Motion Adjustment - Details the extensive swivel capabilities at different points of the monitor arm.
Video: Freelift Pro Dual Monitor Arm Function - Demonstrates the full range of motion, including tilt, swivel, and rotation.
5.2 Регулировка натяжения газовой пружины
The gas spring tension may need adjustment depending on your monitor's weight. Use the provided Allen key to adjust the tension screw located on the arm.
- To reduce tension (for lighter monitors or if arms are too stiff): Turn the screw clockwise (towards '-').
- To increase tension (for heavier monitors or if arms are falling down): Turn the screw counter-clockwise (towards '+').
Each turn needs to be a full 360 degrees. Hold the arm in a horizontal position during adjustment.
Image: Gas Spring Adjust - Provides a visual guide for adjusting gas spring tension and tilt.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates resetting spring tension from 1:06 to 1:11.
6. Организация кабелей.
Route your monitor cables through the integrated cable management channels on the arms to maintain a tidy workspace.
Image: Organize Wires and Tools - Shows how to manage cables and store Allen keys within the arm for convenience.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates cable management from 0:57 to 1:02.
7. Техническое обслуживание
- Регулярно проверяйте все винты и соединения, чтобы убедиться в их надежности и прочности.
- Clean the monitor mount with a soft, damp Ткань. Избегайте использования абразивных чистящих средств и растворителей.
- Periodically re-adjust gas spring tension if monitors feel too loose or too stiff over time.
8. Поиск Неисправностей
If you encounter any issues with your monitor mount, refer to the common problems and solutions below:
8.1 Arms Falling Down / Can't Rise Up
This indicates that the gas spring tension is too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise ('+') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.2 Arms Rising Up / Can't Fall Down
This indicates that the gas spring tension is too high for your monitor's weight. Decrease the tension by turning the adjustment screw clockwise ('-') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.3 Monitors Face Down / Can't Be Adjusted Tilt
The tilting bolt may be too tight. Loosen the tilting bolt (towards '-') with an Allen key, adjust the monitor to your desired angle, then retighten the bolt (towards '+') to fix the angle.
8.4 Swivels Left and Right is Loose / Monitor Can't Swivel
Adjust the tightness of the swivel screw using an Allen key. Tighten or loosen as needed to achieve the desired swivel resistance.
Video: Freelift Pro Dual Monitor arm trouble shooting - This video provides visual guidance for adjusting tension, tilt, and swivel to resolve common issues.
9. Технические характеристики
| Особенность | Спецификация |
|---|---|
| Совместимый размер монитора | 22" - 32" (flat or curved LCD) |
| Максимальная грузоподъемность (на одну руку) | 4.4 - 22 фунтов (2 - 10 кг) |
| Совместимость с VESA | 75x75мм, 100x100мм |
| Диапазон наклона | от +85° до -45° |
| Диапазон поворота | 180° (at VESA plate), 360° (at arm joint), 270° (at base joint) |
| Вращение | 360° |
| Max Height (from desk) | 17.3 дюймов |
| Max Extension (per arm) | 21 дюймов |
| Варианты монтажа | C-Clamp, Втулка |
| C-Clamp Толщина стола | 0.39'' - 2.76'' |
| Толщина столешницы с отверстием для кабеля | 0.39'' - 2.76'' |
| Диаметр отверстия в уплотнительном кольце | 0.39'' - 2.36'' |
| Материал | Легированная сталь |
Image: Perfect For Your Screen - Overview of product compatibility including load capacity, screen size, and VESA patterns.
10. Гарантия и поддержка
For warranty information or technical support, please refer to the product packaging or contact MOUNTUP customer service directly. Keep your purchase receipt for warranty claims.
