Diymore Humidity and Temperature Controller Socket User Manual

1. Введение

This manual provides comprehensive instructions for the Diymore Humidity and Temperature Controller Socket. This device is designed to precisely control humidity and temperature in various environments, such as incubators, terrariums, greenhouses, and storage areas. It features multiple operating modes, calibration functions, and an alarm system to maintain desired environmental conditions.

2. Информация по технике безопасности

Please read all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Ensure the power supply matches the device's specifications (230V, 16A, max 3680W).
• Do not immerse the device or sensor in water or expose it to excessive moisture.
• Не разбирайте и не модифицируйте устройство.
• Хранить в недоступном для детей месте.
• Перед чисткой или техническим обслуживанием отключите устройство от розетки.
• Использовать только в сухих закрытых помещениях.

3. Особенности продукта

The Diymore Controller Socket offers a range of features for precise environmental control:

• Четыре режима работы: Humidification, Dehumidification, Heating, and Cooling.
• Широкий диапазон управления: Humidity 20-95%RH; Temperature -10°C to 50°C (14°F to 122°F).
• Adjustable Start/Stop Values: Program connected devices to activate based on set humidity/temperature thresholds.
• Функция калибровки: Real-time adjustment for humidity (-10~10%RH) and temperature (-9.9~9.9°C).
• Функция будильника: Audible alarm when humidity or temperature exceeds set limits.
• Память данных: Retains all settings after a power failure.
• Функция сброса: Allows restoration of factory settings.
• Button Tone Settings: Customize button feedback.
• Error Prompt Function: Provides indications for operational issues.
• Переключение °C/°F: Легко переключайтесь между единицами измерения температуры — Цельсия и Фаренгейта.

Рисунок 3.1: Надview of Diymore Controller Socket features, including humidity and temperature control, alarm functions, calibration, and memory.

4. Содержимое упаковки

В комплект входят следующие предметы:

• 1 x Diymore Humidity and Temperature Controller Socket (230V)
• 1 x External Sensor Probe

5. Продукт закончилсяview и размеры

Familiarize yourself with the device's components and dimensions.

Рисунок 5.1: Diymore Controller Socket with external sensor.

Рисунок 5.2: Product dimensions of the controller and sensor.

The main unit measures approximately 13.1 cm (5.11 in) in height, 6 cm (2.36 in) in width, and 3.2 cm (1.25 in) in depth. The sensor probe measures approximately 5.5 cm (2.16 in) in length and 2.3 cm (0.90 in) in width.

6. Настройка

1. Распаковать: Carefully remove the controller and sensor from the packaging.
2. Подключите датчик: Ensure the external sensor probe is securely plugged into the designated port on the side of the controller.
3. Датчик положения: Place the sensor in the area where you wish to monitor and control humidity and temperature. Ensure it is not directly exposed to water or extreme conditions that could damage it.
4. Подключить: Insert the controller's plug into a standard 230V power outlet. The display will illuminate.
5. Подключить устройство: Plug your humidifier, dehumidifier, heater, or cooler into the socket on the front of the controller.

7. Инструкция по эксплуатации

The controller features four buttons: РЕЖИМ, НАБОР, ВВЕРХ/КЛК, и ВНИЗ.

7.1. Переключение единиц измерения температуры (°C/°F)

Для переключения между градусами Цельсия (°C) и Фаренгейта (°F):

• Нажмите и удерживайте НАБОР button for 3 seconds. The temperature unit on the display will change.

7.2. Выбор режима работы

The device supports four main operating modes: Humidification (HC mode), Dehumidification (HC mode), Heating (TC mode), and Cooling (TC mode). Press the РЕЖИМ button repeatedly to cycle through these modes.

Рисунок 7.1: Examples of the four working modes and alarm settings.

7.3. Setting Humidity/Temperature Control Values

Чтобы задать желаемые начальные и конечные значения влажности или температуры:

1. Нажмите РЕЖИМ button to select either HC (Humidity Control) or TC (Temperature Control) mode.
2. Нажмите НАБОР button once. The "Start Humidity" or "Start Temperature" value will begin to flash.
3. Используйте ВВЕРХ/КЛК и ВНИЗ buttons to adjust the desired start value.
4. Нажмите НАБОР button again. The "Stop Humidity" or "Stop Temperature" value will flash.
5. Используйте ВВЕРХ/КЛК и ВНИЗ buttons to adjust the desired stop value.
6. Нажмите НАБОР button a third time, or wait a few seconds, to save the settings and exit.

Примечание: For humidification/heating, the start value should be lower than the stop value. For dehumidification/cooling, the start value should be higher than the stop value.

7.4. Настройка функции сигнализации

The device can trigger an alarm if humidity or temperature goes outside a set range.

1. Нажмите РЕЖИМ button to select either HC Alarm (Humidity Alarm) or TC Alarm (Temperature Alarm) mode.
2. Нажмите НАБОР button once. The alarm threshold value will flash.
3. Используйте ВВЕРХ/КЛК и ВНИЗ buttons to adjust the desired alarm threshold.
4. Нажмите НАБОР button again, or wait a few seconds, to save the setting and exit.

When the measured humidity/temperature exceeds the set alarm value, the hygrostat will emit an audible alarm sound.

7.5 Функция калибровки

To calibrate the humidity or temperature readings:

• Нажмите и удерживайте ВВЕРХ/КЛК button. The calibration value will appear and flash.
• Используйте ВВЕРХ/КЛК и ВНИЗ buttons to adjust the calibration offset.
  • Humidity correction range: -10%RH to 10%RH
  • Temperature correction range: -9.9°C to 9.9°C
• Нажмите и удерживайте РЕЖИМ Кнопка для сохранения калибровки и выхода.

7.6. Другие функции

• Память данных: The device automatically saves all setting parameters, which are retained even after a power failure.
• Функция сброса: To restore factory settings, refer to the specific instructions in the full manual (if available) or contact support.
• Button Tone Settings: The device allows for customization of button sounds. Refer to the full manual for detailed instructions.
• Turn Off Alarm Sound: Specific instructions for turning off the alarm sound are typically found in the full manual.

8. Приложения

The Diymore Controller Socket is versatile and suitable for various applications requiring precise humidity and temperature control:

• Инкубаторы
• Domestic Reptile Habitats
• Poultry Houses
• Mushroom Cultivation
• Glass Containers / Terrariums
• Теплицы
• Humidifiers and Dehumidifiers
• Household and Industrial Environments
• Винные погреба
• Холодильники
• Склады

Рисунок 8.1: Diverse applications of the Diymore Controller Socket.

9. Техническое обслуживание

• Уборка: Disconnect the device from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Уход за датчиком: Держите датчик в чистоте, избегайте попадания пыли и мусора. Не сгибайте и не повреждайте кабель датчика.
• Хранилище: При длительном хранении отключите устройство от сети и храните его в сухом, прохладном месте.

10. Поиск Неисправностей

If you encounter issues with your Diymore Controller Socket, refer to the following common problems and solutions:

11. Технические характеристики

12. Гарантия и поддержка

For warranty information or technical support, please refer to the documentation included with your purchase or contact Diymore customer service through their official website or the retailer where the product was purchased. Please have your model number (temperatuur vochtigheid) and purchase date available when contacting support.