RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Продукт закончилсяview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Рисунок 1.1: Надview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Информация по технике безопасности

• ПРЕДУПРЕЖДЕНИЕ: Риск поражения электрическим током. Перед установкой или обслуживанием отключите питание от предохранителя или автоматического выключателя.
• Монтаж должен выполняться квалифицированным электриком в соответствии со всеми национальными и местными электротехническими нормами.
• Обеспечьте объем поставкиtage is correct for the fixture (120-277V).
• Do not handle energized fixture with wet hands.
• Не устанавливайте вблизи горючих материалов.
• Данное приспособление предназначено только для использования внутри помещений.

3. Настройка и установка

3.1. Предустановка

• Распакуйте светильник и осмотрите его на наличие повреждений.
• Ensure all necessary components are present (LED Fixture).
• Перед началом установки отключите питание на автоматическом выключателе.

3.2. Монтаж приспособления

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Рисунок 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Электропроводка

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Рисунок 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Инструкция по эксплуатации

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Рисунок 4.1: Крупный план view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Выберите одну из следующих настроек: 40 Вт, 50 Вт, или 60 Вт.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Выберите одну из следующих настроек: 3500К (Neutral White), 4000К (Холодный белый) или 5000К (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Функция регулировки яркости

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Техническое обслуживание

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Уборка: Перед чисткой отключите питание. Используйте мягкую, сухую или слегка сухую тряпку.amp Для протирки внешней поверхности светильника используйте тряпку. Не используйте абразивные чистящие средства или растворители.
• светодиоды: Встроенный светодиодный источник света рассчитан на длительный срок службы и не требует замены.

6. Поиск Неисправностей

If the fixture is not operating as expected, refer to the following common issues and solutions:

Если предложенные шаги по устранению неполадок не решат проблему, обратитесь в службу поддержки клиентов RAB Lighting.

7. Технические характеристики

8. Информация о гарантии

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting webили обратитесь в службу поддержки напрямую. Сохраните чек о покупке для предъявления гарантийных претензий.

9. Поддержка клиентов

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Webсайт: www.rablighting.com
• Обратитесь к webСайт содержит актуальную контактную информацию, включая номера телефонов и адрес электронной почты службы поддержки.