STINGER CTSGM-49

Connects2 CTSGM-49 Radio Replacement Module User Manual

Model: CTSGM-49 | Brand: STINGER

Введение

The Connects2 CTSGM-49 Radio Replacement Module is designed to facilitate the installation of an aftermarket car stereo in select GM vehicles manufactured between 2004 and 2016. This module ensures the retention of critical factory functions, including steering wheel controls and various vehicle chimes, while preventing fault codes in the vehicle's Electronic Control Module (ECM).

Характеристики продукта

  • Radio Replacement Simplification: Streamlines the integration of an aftermarket head unit into your vehicle's existing electrical system.
  • Steering Wheel Control (SWC) Retention: Maintains the functionality of your factory steering wheel buttons for audio control (volume, track, etc.).
  • Factory Chime Retention: Preserves all original vehicle chimes, including safety and warning alerts (e.g., low fuel, seatbelt, park assist).
  • ECM Fault Code Prevention: Sends correct data to the vehicle's ECM to prevent fault codes that can occur when the factory radio is removed, ensuring proper vehicle diagnostics.
  • Выходная мощность дополнительных устройств: Provides a +12V switched accessory power source (rated at 0.3A) for the aftermarket radio. Note: This output is not intended to power the head unit directly.

Содержимое упаковки

Connects2 CTSGM-49 Radio Replacement Module with wiring harnesses and chime speaker

The Connects2 CTSGM-49 package includes the following components:

  • Connects2 CTSGM-49 Radio Replacement Module
  • Vehicle-specific Wiring Harnesses
  • Chime Speaker (for factory chime retention)

Image shows the main module, various wiring harnesses for vehicle integration, and a small speaker for retaining factory chimes.

Совместимость с транспортными средствами

This module is compatible with a range of GM vehicles. Please refer to the table below to confirm your vehicle's compatibility and supported steering wheel control functions. Note that some vehicles may not be compatible if fitted with factory navigation for specific model years.

Vehicle Compatibility Table for Connects2 CTSGM-49 module

The table details compatible Buick, Chevrolet, GMC, Hummer, Pontiac, Saturn, and Suzuki models, their respective years, harness type (A, B, C), and whether Steering Wheel Control (SWC) functions are supported (Y/N). Specific notes regarding factory navigation compatibility are also included.

Key Compatibility Notes:

  • Бьюик: Enclave (2008-2012), Lucerne (2006-2010)
  • Шевроле: Avalanche (2007-2013), Cobalt (2005-2010), Equinox (2007-2009), Express Van (2008-2016), HHR (2006-2011), Impala/Impala SS (2006-2013), Malibu (2004-2012), Monte Carlo (2006-2007), Silverado 1500-3500 (2007-2013), Suburban (2007-2014), Tahoe (2007-2014), Traverse (2009-2012). Note: Suburban/Tahoe/Sierra/Yukon models from 2012-2013 are not compatible if fitted with factory navigation.
  • ГМК: Acadia (2007-2012), Savana (2008-2016), Sierra 1500-3500 (2007-2013), Yukon (2007-2014), Yukon XL (2007-2014).
  • Хаммер: H2 (2008-2009)
  • Понтиак: G5 (2007-2009), G6 (2005-2009), Solstice (2007-2009), Torrent (2007-2009)
  • Сатурн: Aura (2007-2009), Outlook (2008-2009), Sky (2007-2009)
  • Сузуки: XL7 (2007-2010)

Руководство по установке

Installation of the CTSGM-49 module requires basic automotive electrical knowledge. It is recommended to consult a professional installer if you are unsure about any steps. Always disconnect the vehicle's battery before beginning installation.

Общие шаги установки:

  1. Подготовьте автомобиль: Ensure the vehicle's ignition is off and disconnect the negative terminal of the battery.
  2. Удалить заводское радио: Аккуратно снимите имеющуюся штатную магнитолу с приборной панели.
  3. Подключите жгуты проводов: Connect the vehicle-specific wiring harnesses from the CTSGM-49 module to the vehicle's factory wiring. Ensure all connections are secure.
  4. Подключение автомобильной магнитолы стороннего производителя: Connect the other end of the CTSGM-49 harnesses to your aftermarket car stereo's wiring. Pay close attention to power, ground, speaker, and accessory wire connections.
  5. Integrate Chime Speaker: Connect the provided chime speaker to the designated output on the CTSGM-49 module. Position the speaker in a location where chimes can be clearly heard but are not obstructed.
  6. Размещение модуля: Securely mount the CTSGM-49 module in a safe, dry location behind the dashboard, away from moving parts or heat sources.
  7. Тестовая система: Reconnect the vehicle's battery. Turn on the ignition and test the aftermarket radio's functionality, including audio, steering wheel controls, and factory chimes. Verify that no new warning lights appear on the dashboard.
  8. Соберите приборную панель: Once all functions are confirmed, carefully reassemble the dashboard components.

For detailed wiring diagrams and specific vehicle instructions, please refer to the comprehensive installation manual provided with your product or consult the manufacturer's webсайт.

Операция

Once installed, the Connects2 CTSGM-49 module operates automatically to maintain factory functions. There are no user-adjustable settings on the module itself.

Органы управления на рулевом колесе:

Your factory steering wheel controls will function as they did with the original radio, allowing you to control basic functions of your aftermarket head unit such as:

  • Увеличение/уменьшение громкости
  • Track Up/Down (Next/Previous)
  • Выбор режима/источника
  • Call Answer/End (if supported by your aftermarket radio and vehicle)

The specific functions retained may vary slightly depending on your vehicle's original configuration and the capabilities of your aftermarket radio.

Factory Chimes:

All factory chimes (e.g., seatbelt warning, door ajar, low fuel, park assist) will continue to sound through the dedicated chime speaker provided with the module. The volume of these chimes is typically controlled by the vehicle's factory settings or is fixed.

Поиск неисправностей

If you encounter issues after installing the CTSGM-49 module, consider the following common troubleshooting steps:

ПроблемаВозможная причинаРешение
No power to aftermarket radio.Incorrect wiring, blown fuse, or module not receiving power.Check all wiring connections, especially power and ground. Verify vehicle fuses. Ensure the module is properly connected to the vehicle's power source. Remember the module's accessory power output is 0.3A and not for powering the head unit directly.
Не работают кнопки управления на руле.Incorrect SWC wiring, incompatible aftermarket radio, or vehicle not supported for SWC retention.Verify the SWC wires are correctly connected between the module and the aftermarket radio. Check your aftermarket radio's manual for SWC input configuration. Confirm your vehicle model and year are listed as supporting SWC in the compatibility table.
No factory chimes or chimes are too quiet/loud.Chime speaker not connected, faulty speaker, or incorrect module connection.Ensure the chime speaker is securely connected to the module. Check the speaker for damage. Verify all module connections are firm. Chime volume is typically fixed by the vehicle's system.
Check Engine Light or other warning lights appear.Module not communicating correctly with vehicle's ECM.Double-check all module connections. Ensure the module is receiving proper power and data signals. If issues persist, consult a professional installer or vehicle technician.

If troubleshooting steps do not resolve the issue, please contact STINGER customer support for further assistance.

Технические характеристики

  • Номер модели: CTSGM-49
  • Бренд: ЖАЛО
  • Материал: Акрилонитрил-бутадиен-стирол
  • Вес товара: 5.6 унции
  • Размеры упаковки: 9 x 4.5 x 1.75 дюйма
  • Тип разъема: Rectangular Or Circular Connector
  • Выходная мощность дополнительных устройств: +12V, 0.3A (max)
  • Совместимость: Select GM Buick/GMC/Hummer/Pontiac/Saturn/Suzuki Vehicles (2004-2016) with GM LAN 29 Bit system.

Гарантия и поддержка

STINGER products are designed for reliability and performance. For information regarding warranty coverage, technical support, or replacement parts, please visit the official STINGER webсайте или обратитесь в их отдел обслуживания клиентов.

Производитель: ЖАЛО

Дата первой доступности: 6 сентября 2024 г.

Для получения самых последних ресурсов поддержки посетите, пожалуйста, STINGER Store on Amazon или их официальный представитель webсайт.

Связанные документы - CTSGM-49

Предварительноview Stinger SRX-GM14128 HORIZON12 Radio Replacement Kit Installation Guide for Silverado/Sierra
Comprehensive installation guide for the Stinger SRX-GM14128 kit, enabling the installation of the HORIZON12 12.8-inch multimedia infotainment system in 2014-2019 Chevrolet Silverado and GMC Sierra trucks while retaining factory features.
Предварительноview Инструкция по установке Stinger HEIGH10 UN1810E-FD5 для Ford Transit Custom
Данное руководство по установке содержит подробные инструкции по монтажу 10-дюймового сенсорного информационно-развлекательного экрана Stinger HEIGH10 в Ford Transit Custom (с 2018 года выпуска). Оно охватывает демонтаж магнитолы, сборку устройства, установку лицевой панели, подключение проводов, функциональность управления с рулевого колеса, этапы подключения и техническую поддержку.
Предварительноview Инструкция по установке комплекта для замены магнитолы Stinger SR-GM14HX HORIZON10 для автомобилей Chevrolet Silverado и GMC Sierra (2014-2019).
Detailed installation guide for the Stinger SR-GM14HX Radio Replacement Kit, enabling the installation of the HORIZON10 modular radio in select 2014-2019 Chevrolet Silverado and GMC Sierra trucks. Covers features, components, tools, disassembly, wiring, and final installation.
Предварительноview Руководство пользователя Stinger HORIZON10 SRK-GM14HX — установка и эксплуатация
Подробное руководство пользователя для информационно-развлекательной системы Stinger HORIZON10 SRK-GM14HX, охватывающее установку, функции, настройки и устранение неполадок для грузовиков Chevrolet Silverado и GMC Sierra.
Предварительноview Руководство по установке Stinger HEIGH10 для Ford Ranger 2016+
Полное руководство по установке интегрированной информационно-развлекательной системы Stinger HEIGH10 с сенсорным экраном для моделей Ford Ranger 2016+. Включает снятие стереосистемы, установку приборной панели и настройку интерфейса.
Предварительноview Stinger SRK-JK11HX HORIZON10 Installation Kit for Jeep Wrangler JK (2011-2018) - Installation Guide
Comprehensive installation guide for the Stinger SRK-JK11HX HORIZON10 integration kit for 2011-2018 Jeep Wrangler JK models. Learn how to install, connect wiring, and retain vehicle features.