Руководство пользователя лазерного гравировального станка SCULPFUN S9 с поворотным роликом.

1. Введение

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SCULPFUN S9 Laser Engraver with Rotary Roller. Designed for precision engraving and cutting, this machine offers advanced features for various materials. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Продукт закончилсяview

Основные характеристики

• 5.5W Diode Laser with 90W CO2 Laser Effect: Ultra-fine 0.08mm laser focus for deep cutting.
• Возможности резки: Up to 15mm wood and 10mm acrylic.
• Материалы для гравировки: Ceramics, stainless steel, dark stone, wood, acrylic.
• Rotary Roller Included: For engraving cylindrical objects with a diameter range of 6-150mm.
• Быстрый фокус: Fixed focus lens and sliding rail design for rapid setup.
• Высокая точность: Ultra-fine 0.1mm engraving line.
• Конструкция безопасности: Laser filter blocks 98% of UV light, emergency stop switch, A4 steel pad for table protection.
• Широкая совместимость: Supports LiteFire, GrblController, Benboc, LightBurn, Laser GRBL.
• File Форматы: KPG, BMP, NC, G-code, SVG, DXF, PNG.
• Операционные системы: Compatible with Windows and Mac.
• Подключи и работай: 100% pre-installed for easy setup.

Изображения продукта

Figure 2.1: SCULPFUN S9 Laser Engraver with included rotary roller and exampгравированных изделий.

Figure 2.2: The SCULPFUN S9 in operation, demonstrating cylindrical engraving using the rotary roller.

Рисунок 2.3: Подробная информация view of the S9 laser head, highlighting its 90W CO2 laser effect and beam shaping technology.

Рисунок 2.4: Examples of the S9's cutting depth on 15mm wood, 10mm plywood, and 10mm acrylic.

Что включено

Figure 2.5: All components included in the SCULPFUN S9 Laser Engraver package.

• 1 компонент оси X
• 2 x X-profiles
• 2 x Y-profiles
• 1 x Компонент блока управления
• 3 х опорная ножка
• 1 x Лазерный компонент
• 1 адаптер питания 12 В 5 А
• 1 х кабель питания
• 1 х USB-кабель
• 10 х галстуков
• 1 x Brush
• 1 x Anti-laser goggles
• 1 x 10x10 cm 3mm thick wood chip
• 1 x 10x10 cm wood piece
• 1 x A4 size protective steel pad
• 1 x Mounting kit with screws for steps 1 to 5
• 2 ремень
• 1 x M5 T-type hexagonal wrench
• 1 x M4 L-type hexagonal wrench
• 1 x M3 L-type hexagonal wrench
• 1 x 8 to 10 mm wrench

3. Настройка

The SCULPFUN S9 Laser Engraver is designed for quick and easy setup, with many components pre-installed. The rotary roller is also 100% pre-assembled for plug-and-play functionality.

Начальная сборка

1. Follow the detailed instructions provided in the included manual for assembling the main frame components (X-axis, Y-profiles, support legs).
2. Utilize the separated screw kits and included wrenches for a smooth assembly process.

Установка лазерного модуля

1. Carefully attach the laser component to the X-axis.
2. Убедитесь, что все соединения надежны.

Rotary Roller Connection

Figure 3.1: Steps for connecting the SCULPFUN Rotary Roller, highlighting its pre-installed nature.

Figure 3.2: The S9 and rotary roller are designed for plug-and-play functionality, simplifying setup.

Connect the rotary roller's adapter cable to the X-axis or Y-axis stepper motor wiring of the laser engraving machine. No additional software settings are required for the rotary roller as its surface rotation speed is precisely designed to match the original Y-axis speed.

Питание и USB-подключение

Подключите адаптер питания и USB-кабель к устройству и компьютеру.

Установка программного обеспечения

Install your preferred engraving software (e.g., LightBurn, Laser GRBL) on your Windows or Mac computer.

4. Инструкция по эксплуатации

Подготовка материала

Figure 4.1: The rotary roller provides a larger engraving space for various cylindrical objects.

Figure 4.2: The rotary roller features a sliding adjustment for quick and easy distance setting.

Рисунок 4.3: Ключевое преимуществоtages of the SCULPFUN Rotary Roller for cylindrical engraving.

Place the material to be engraved or cut on the working surface. For flat materials, use the protective steel pad to prevent damage to your table. For cylindrical objects, position them securely on the rotary roller.

Регулировка фокуса

Figure 4.4: Adjusting the laser focus by sliding the module up or down.

The S9 features a fixed-focus lens. To adjust focus, slide the laser module along its rail and tighten the screws until the laser beam is optimally focused on the material surface. This ensures a precise 0.08mm ultra-fine laser spot.

Работа программного обеспечения

Figure 4.5: The S9 is compatible with popular laser engraving software like Laser GRBL and LightBurn.

Figure 4.6: The S9's engraving area can be expanded for larger projects.

Figure 4.7: A wide range of materials and objects can be engraved, including pens, cups, flowerpots, and rings.

Open your chosen engraving software (e.g., LightBurn, Laser GRBL). Import your design file (KPG, BMP, NC, G-code, SVG, DXF, PNG formats are supported). Adjust engraving parameters such as power, speed, and passes according to the material type and desired effect. For rotary engraving, ensure the software settings are configured for cylindrical objects, though the S9 rotary roller is designed for plug-and-play speed matching.

Меры предосторожности

Figure 4.8: The circular protective cover allows for observation while providing eye protection.

• Always wear the provided anti-laser goggles when the machine is operating.
• The laser filter on the S9 can block 98% of UV rays, allowing for observation without goggles, but wearing them is highly recommended for maximum safety.
• Ensure the emergency stop switch is easily accessible during operation.
• Keep pets and children away from the operating machine.
• Для удаления испарений, образующихся при гравировке, работайте в хорошо проветриваемом помещении.

5. Техническое обслуживание

Регулярное техническое обслуживание обеспечивает долговечность и оптимальную производительность вашего лазерного гравировального станка SCULPFUN S9.

• Уборка: Regularly clean the laser lens and the machine's rails to ensure optimal performance and prevent dust buildup. Use a soft, lint-free cloth.
• Смазка: Periodically lubricate the moving parts of the X and Y axes to ensure smooth operation.
• Натяжение ремня: Check the tension of the belts and adjust if necessary to maintain engraving accuracy.
• Лазерная проверка модулей: Inspect the laser module for any signs of damage or wear. If the laser output appears weak or inconsistent, consult the manufacturer's support.

6. Поиск Неисправностей

В этом разделе приведены решения распространенных проблем, с которыми вы можете столкнуться.

• Машина не включается:
  • Check power cable connections to the machine and the outlet.
  • Убедитесь, что адаптер питания работает правильно.
• Лазер не срабатывает/слабый выходной сигнал:
  • Verify laser module connection.
  • Check focus adjustment.
  • Ensure laser power settings in software are correct.
  • Очистите линзу лазера.
• Engraving Inaccuracy/Skipped Steps:
  • Проверьте натяжение ремней по осям X и Y.
  • Убедитесь, что все винты и соединения затянуты.
  • Verify material is securely placed and not moving during operation.
  • Check software settings for speed and acceleration.
• Проблемы с подключением программного обеспечения:
  • Убедитесь, что USB-кабель надежно подключен.
  • Перезапустите программное обеспечение и машину.
  • Проверьте диспетчер устройств для корректной установки драйверов.

7. Технические характеристики

8. Гарантия и поддержка

Информация о гарантии

The product may be eligible for extended warranty plans (e.g., 12-month or 24-month extended warranty against failures and defects) available at the time of purchase. Please refer to your purchase documentation for specific warranty terms and conditions.

Поддержка клиентов

For technical assistance, troubleshooting, or inquiries, please visit the official SCULPFUN store on Amazon or contact SCULPFUN customer support directly. You can find more information and contact details at: Магазин SCULPFUN на Amazon.

9. Официальные видеоролики о продукте

No official product videos with 'Seller' as creator type and specific URLs were provided in the product data to embed in this manual.