Руководства+

BN-LINK U135BL

BN-LINK U135BL 7-Day Programmable Astronomical Timer Switch Instruction Manual

Model: U135BL

Введение

Thank you for choosing the BN-LINK U135BL 7-Day Programmable Astronomical Timer Switch. This device is designed to automate your lighting based on astronomical events like sunrise and sunset, offering convenience and energy efficiency. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Информация по безопасности

  • Требуется нейтральный провод: A neutral wire is essential for the installation of this timer switch.
  • Single Pole Only: This timer switch is designed for single-pole installations only.
  • В списке ETL: This product is ETL listed, ensuring compliance with North American safety standards.
  • Квалифицированный электрик: Always have a qualified electrician install this product to prevent electrical hazards.
  • Power Off at Breaker: Before any installation or maintenance, always cut off power at the circuit breaker to avoid electric shock.

Настройка и установка

1. Распаковка и подготовка

The package includes the BN-LINK U135BL timer switch, a wall plate, mounting screws, and twist-on wire connectors. You will need a flat-head screwdriver and a Phillips head screwdriver for installation.

2. Инструкции по подключению

Важный: Перед продолжением убедитесь, что питание на автоматическом выключателе отключено.

  1. Unscrew and remove the existing wall plate and switch.
  2. Verify the presence of a neutral wire in your wall box. A neutral wire is typically white.
  3. Подключите черный провод of the timer to the hot wire of the wall box using a twist-on wire connector.
  4. Подключите красный провод of the timer to the загрузочный провод of the wall box using a twist-on wire connector.
  5. Подключите белый провод of the timer to the нейтральный провод of the wall box using a twist-on wire connector.
  6. Подключите зеленый провод of the timer to the заземляющий провод of the wall box using a twist-on wire connector.
  7. Carefully push the wired timer switch into the wall box and secure it with the provided screws.
  8. Прикрепите настенную пластину.
Wiring diagram for BN-LINK Astronomical Timer Switch
Изображение: Easy Wire Installation. This diagram illustrates the correct wiring connections for the BN-LINK timer switch, showing the black (hot), red (load), white (neutral), and green (ground) wires. A neutral wire is required for proper installation.

3. Initial Power-On and System Reset

  1. Включите питание с помощью автоматического выключателя.
  2. If the screen is blank, dim, or flashing, allow the internal battery to charge for 10 минуты.
  3. Press the "RESET" button to reset the system. The screen display will flash.
  4. Hold the "SET" button for 3 секунд to quit the flashing clock display.

Примечание: The system time and all settings will be erased after a system reset.

4. Setting Current Date, Time, and Sunrise/Sunset Time

Follow these steps to configure the basic time settings:

  1. Установленный год: Press "SET". The year (e.g., 2018) will flash. Use "+" or "-" to set the current year (from 2018 to 2099).
  2. Set Month and Day: Press "SET" again to confirm the year. The month and day will flash. Use "+" or "-" to set the current date (from 1.1 to 12.31).
  3. Set Hour and Minute: Press "SET" again to confirm the date. The hour and minute will flash. Use "+" or "-" to set the current time (from 12:00 AM to 11:59 PM). Ensure you select the correct AM/PM format.
  4. Confirm Time and DST: Press "SET" to confirm the correct time. Then use "+" or "-" to set DST (Daylight Saving Time) to ON or OFF. Enable DST if your region observes it to avoid manual adjustments.
  5. Выберите часовой пояс: Press "SET" to confirm DST setting. The Time Zone will flash. Use "+" or "-" to choose your local time zone from PAC (Pacific), MOU (Mountain), CEN (Central), EAS (Eastern), HAW (Hawaii), and ALA (Alaska).
  6. Set Sunrise/Sunset Time: Press "SET" to confirm the current time zone. The sunrise time will flash. Use "+" or "-" to set the correct sunrise time for your time zone. Press "SET" again, and the sunset time will flash. Use "+" or "-" to set the correct sunset time.
  7. Выйти из настроек: Press "SET" to confirm the sunset time and exit the setting process. If you are in Daylight Saving Time, check if the DST icon is displayed.

Кончик: If you want to quit setting at any stage, hold "SET" for 3 seconds or leave the buttons untouched for 90 seconds. Pressing "+" or "-" once changes values by one unit. Holding for less than 2 seconds changes by 6-8 units/second. Holding for 2 seconds or more changes by 60 units/second.

Видео: How to Set Up BN-LINK Astronomical Timer Switch. This video provides a step-by-step guide on installing and setting up the BN-LINK astronomical timer switch, including initial power-on, system reset, and configuring date, time, and time zone settings.

Инструкция по эксплуатации

1. Setting ON and OFF Events (Programs)

The timer switch supports up to 18 ON/OFF programs. To set a program:

  1. Press "PROG". The display will show "--:--".
  2. Press "SET" to set the first ON event. The day of the week will flash first. Use "+" or "-" to choose the desired day(s) or day combination (e.g., MO TU WE TH FR SA SU, MO, TU, WE, TH, FR, SA, SU, MO TU WE TH FR, SA SU).
  3. Press "SET" to confirm the day(s). The time will flash. Use "+" or "-" to set the desired ON time (from 12:00 AM to 11:59 PM). If you want to choose sunrise or sunset time as the ON time, press the 'D/D' button once for sunrise or twice for sunset.
  4. Press "PROG" to confirm the ON event. The display will show "--:--" again.
  5. Press "SET" to set the first OFF event. The day of the week will flash first. Use "+" or "-" to choose the desired day(s) or day combination.
  6. Press "SET" to confirm the day(s). The time will flash. Use "+" or "-" to set the desired OFF time (from 12:00 AM to 11:59 PM). If you want to choose sunrise or sunset time as the OFF time, press the 'D/D' button once for sunrise or twice for sunset.
  7. Press "PROG" to confirm the OFF event. The display will show "--:--" again.
  8. Repeat steps 2.2 to 2.6 to set additional programs, up to a maximum of 18.

Кончик: To quit event setting at any stage, hold "PROG" for 3 seconds or leave the keys untouched for 90 seconds. To clear or resume the current input, press either the ON/OFF key once or twice. To revise a previous input, press 'SET' to shift to the relevant stage and make the correction.

Timer display showing 5:00 AM and 8:00 PM settings
Изображение: Timer Display for Sunrise/Sunset. This image shows the timer display with 5:00 AM and 8:00 PM settings, indicating the flexibility of programming for different times of day.

2. Автоматический/Ручной режим

This timer switch has two operating modes: MANUAL (MAN ON/MAN OFF) and AUTO (AUTO ON/AUTO OFF).

  • Режимы переключения: After completing program setup, press and hold the ON/OFF button for 3 seconds or longer to switch between MANUAL and AUTO modes.
  • Ручной режим: Press ON/OFF to turn the timer constantly ON or OFF.
    • MAN ON: Выходная мощность постоянно включена.
    • MAN OFF: Выходная мощность постоянно ВЫКЛ.
  • Автоматический режим: Press ON/OFF to temporarily turn the timer ON or OFF.
    • AUTO OFF: Power output is temporarily cut off and will be resumed upon the next ON event.
    • AUTO ON: Power output is temporarily active and will be cut off upon the next OFF event.

Примечание: Ensure the timer switch is set to AUTO mode for it to operate based on the programmed settings.

3. Daylight Savings Time (DST) Mode

The DST mode automatically adjusts the time, eliminating the need for manual changes and ensuring accurate lighting control year-round.

  • Activate/Deactivate DST: Temporarily activate or deactivate DST by holding the "+" button for 3 seconds.
  • When DST is ON, the DST icon will be displayed on the screen.
  • When DST is OFF, the icon will disappear.

4. Случайный режим

Activate the "Random" vacation mode to randomize light schedules, creating the illusion that your home is occupied to deter potential intruders.

  • Activate/Deactivate Random Function: Press and hold "-" for 3 seconds or more to activate or deactivate the random function.
  • When this function is active, the "RND" icon will display.
  • At least one program must be set before activating the random function.
  • When the random function is active, the ON and OFF events will be randomly postponed by 0-30 minutes respectively.
House exterior with burglar, illustrating random mode
Изображение: Random Mode for Security. This image depicts a house exterior with a figure resembling a burglar, highlighting how the random mode can make your home appear occupied, enhancing security.

Обслуживание

The BN-LINK U135BL timer switch requires minimal maintenance. Ensure the device is kept clean and free from dust. Do not use abrasive cleaners or solvents. In case of any issues, refer to the troubleshooting section or contact customer support.

Поиск неисправностей

Problem 1: No screen display or faded display.

Возможная причина: Низкий заряд батареи.

Корректирующее действие: Energize the timer to charge the internal battery for 10 minutes, then press the "RESET" button to reset the timer.

Problem 2: Timer does not turn on or off as programmed.

Possible Cause A: Таймер работает в ручном режиме.

Корректирующее действие: Switch the operation mode to AUTO by holding the ON/OFF button for 3 seconds.

Possible Cause B: Random function is active.

Корректирующее действие: Deactivate random function by holding the "-" button for 3 seconds.

Possible Cause C: DST is disabled, while the device is located in a region that observes DST. As a result, the internal time was not adjusted when DST started or ended, causing the scheduled operations to run at incorrect times.

Корректирующее действие: Enable DST by following the time setting procedure on the timer switch (hold "+" for 3 seconds).

Possible Cause D: Current system time on the timer switch is incorrect.

Корректирующее действие: Verify and correct the current time setting on the device by following the time setting procedure on the timer switch.

Possible Cause E: Программы были установлены неправильно.

Корректирующее действие: Re-program the timer following the operating instructions in this manual.

Видео: BN-LINK Astronomical Timer Switch Troubleshooting. This video provides visual guidance and solutions for common issues encountered with the BN-LINK astronomical timer switch, such as display problems or incorrect program execution.

Технические характеристики

Режим работыВКЛ-ВЫКЛ-ВКЛ
Текущий рейтинг15 Amps
Рабочий объемtage125 Вольт
Тип контактаНормально закрытый
Тип разъемаClamp
БрендБН-ЛИНК
ТерминалВинт
Размеры товара Д x Ш x В4.6 x 2.8 x 1.6 дюйма
Тип приводаКнопка нажатия
Контактный материалМеталл
Количество позиций18
Тип контроллераКнопка нажатия
Метод контроляТрогать
ЦветБелый
Ватtage1875 Вт
Количество единиц1.0 Количество
ПроизводительБН-ЛИНК
СКП810079585892
Номер деталиBND-60 U135B
Вес товара5.5 унции
Размеры продукта4.6 x 2.8 x 1.6 дюйма
Номер модели товараU135BL
СтильAstronomical with Blue Backlight
Количество в упаковке1
Батарейки включены?Да
Нужны ли батареи?Да
Тип элемента батареиNiMH

Информация о гарантии

BN-LINK products are designed to provide reliable performance. For specific warranty details, please refer to the documentation included with your purchase or contact BN-LINK customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Поддержка клиентов

If you require further assistance or have any questions regarding your BN-LINK U135BL Astronomical Timer Switch, please contact our support team:

Мы здесь, чтобы помочь!

Связанные документы - U135BL

Предварительноview BN-LINK SU101D 7-Day Programmable In-Wall Digital Timer Switch User Manual
User manual for the BN-LINK SU101D 7-day programmable in-wall digital timer switch. Covers installation, wiring (single-pole and 3-way), programming, operation, and troubleshooting for automating lights, fans, and motors.
Предварительноview BN-LINK 7-Day In-Wall Digital Timer Installation and User Manual
Comprehensive guide for the BN-LINK BND-60/SU101d 7-Day In-Wall Digital Timer, covering technical specifications, installation for single-pole, 3-way, and 4-way setups, programming, and troubleshooting.
Предварительноview Цифровой 6-розеточный таймер BN-LINK BNC-U3S на 7 дней с креплением на колышек и кабелем длиной 1,8 м (6 футов) - наружный, влагозащищенный.
Подробные технические характеристики и особенности 7-дневного цифрового таймера BN-LINK BNC-U3S. Этот защищенный от атмосферных воздействий уличный таймер имеет 6 розеток, программируемые расписания и резервное питание от батареи для удобного управления наружным освещением и другими устройствами.
Предварительноview BN-LINK 7-Day In-Wall Astronomical Digital Timer - User Manual & Setup Guide
Comprehensive guide for the BN-LINK 7-Day In-Wall Astronomical Digital Timer. Learn how to install, program, and use features like sunrise/sunset activation, manual override, and random security settings.
Предварительноview BN-LINK BND-60/U97A Таймер короткого цикла повторения Руководство пользователя
Руководство пользователя для таймера короткого повторения цикла BN-LINK BND-60/U97A. В этом руководстве подробно описаны характеристики изделия, установка, дополнительные настройки для круглосуточного, дневного и ночного управления, устранение распространенных неисправностей и информация о гарантии.
Предварительноview Руководство пользователя цифрового таймера BN-LINK CP-U191 с двумя розетками для наружного использования
Полное руководство пользователя для цифрового таймера BN-LINK CP-U191 с двумя розетками для наружного использования. Включает инструкции по настройке, программированию, составлению расписания, обеспечению безопасности во время отпуска, переходу на летнее время и устранению неполадок.