Fender Bassman Reverb Pedal

Введение

The Fender Bassman Reverb Pedal is designed to provide bass-tuned room and hall reverb effects, enhancing your instrument's tone with depth and space. This pedal incorporates meticulously crafted analog and digital circuits to deliver professional-grade reverb while maintaining low-end clarity. Its compact design makes it suitable for any pedalboard.

Основные характеристики

• Bass-tuned room and hall reverb DSP algorithms with analog dry-through.
• Low cut knob and pre-delay switch to maintain signal clarity.
• Внутренний дamp control for adjusting the high frequency content of the reverb signal.
• Переключаемый режим с мягким касанием: истинный или буферизованный байпас с эффектом шлейфа.
• Side-mounted pad switch to suit active basses.

Настраивать

Перед подключением педали убедитесь, что... amplifier and other effects are powered off. Use high-quality instrument cables for optimal signal integrity.

Связи

1. Подключите свою бас-гитару к ВХОД Джек на педали.
2. Подключите ВЫХОД штекер педали к вашему ampвклад лифера.
3. Connect a 9V DC power supply (center-negative) to the 9V DC IN Джек.

Рисунок 1: Сзади view of the pedal with input, output, and power connections.

The rear of the pedal features clearly labeled input, output, and power jacks for easy connection to your instrument and ampпожизненнее.

Операционный контроль

The Bassman Reverb Pedal features intuitive controls for shaping your desired reverb sound. Familiarize yourself with each knob and switch to unlock the pedal's full potential.

Рисунок 2: Вверху view of the pedal's control layout.

Knobs

• ВРЕМЯ: Adjusts the length of the reverb decay. Turn clockwise for longer, more expansive reverb tails.
• НЧ: Controls the amount of low frequencies removed from the reverb trails. This helps prevent muddiness and maintains bass clarity.
• УРОВЕНЬ: Sets the overall output volume of the reverb effect.

Переключатели

• ТИП: Selects between different reverb algorithms (e.g., Room, Hall). Refer to the description for specific algorithm details.
• ПРЕД: Engages or disengages the pre-delay function, which introduces a slight delay between the dry signal and the onset of the reverb. This can add clarity to individual notes.

Внутренний контроль

• DAMP Контроль: An internal control that adjusts the high-frequency content of the reverb signal. This allows for fine-tuning the brightness or darkness of the reverb.
• Bypass Switch (True/Buffered): The pedal offers soft-touch switchable true or buffered bypass with trails. This setting can typically be adjusted via an internal switch or specific power-up sequence. Consult the full technical manual for detailed instructions on changing bypass modes.

Side-Mounted Switch

• Переключатель ПАД: A side-mounted switch designed to accommodate active basses by providing an input pad, preventing signal overload.

Включение педали

The Bassman Reverb Pedal operates on a standard 9V DC power supply (center-negative). Ensure the power supply meets the specified voltage and polarity requirements to avoid damage to the unit.

• Томtage: 9 Вольт
• Ampярость: 100 миллиamps (minimum recommended)
• Источник питания: Battery Powered (internal 9V battery) or external DC power supply.

Обслуживание

To ensure the longevity and optimal performance of your Bassman Reverb Pedal, follow these maintenance guidelines:

• Уборка: Для очистки внешней поверхности педали используйте мягкую сухую ткань. Избегайте абразивных чистящих средств или растворителей.
• Хранилище: Store the pedal in a dry, cool environment away from direct sunlight and extreme temperatures.
• Замена батареи: If using a battery, replace it when the indicator light dims or the effect performance degrades. Disconnect the input cable when not in use to conserve battery life.
• Соединения: Периодически проверяйте все кабельные соединения на герметичность и износ.

Поиск неисправностей

If you experience issues with your pedal, try the following steps:

• Нет звука: Check all cable connections, power supply, and ensure the pedal is engaged. Test with different cables and power supply if possible.
• Слабый/искаженный звук: Verify the input signal level (especially with active basses and the PAD switch). Check battery life if applicable.
• Чрезмерный шум: Ensure you are using a high-quality, isolated power supply. Check for ground loops in your signal chain.
• Эффект не вовлекает: Ensure the footswitch is functioning correctly. If in buffered bypass mode, check the internal bypass setting.

Технические характеристики

Гарантия и поддержка

For warranty information, technical support, or service inquiries, please refer to the official Fender website or contact your authorized Fender dealer. Keep your purchase receipt as proof of purchase.