Введение
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 10L Ultrasonic Cleaner with Heater & Timer, along with guidelines for using the accompanying 34 fl oz Ultrasonic Cleaner Solution. Please read this manual thoroughly before initial use and retain it for future reference.
Инструкции по технике безопасности
ПРЕДУПРЕЖДЕНИЕ:
- Перед заполнением или опорожнением резервуара всегда убедитесь, что устройство отключено от сети.
- Do not operate the cleaner without liquid in the tank.
- Не погружайте основной блок в воду или другие жидкости.
- Хранить в недоступном для детей месте.
- Use only recommended cleaning solutions. Avoid flammable, corrosive, or abrasive liquids.
- Обеспечьте надлежащую вентиляцию при использовании чистящих растворов.
- Если шнур питания поврежден, его должен заменить производитель или квалифицированный сервисный агент.
- Avoid direct contact with the cleaning solution, especially concentrated forms. Wear appropriate protective gear (gloves, eye protection).
- Refer to the cleaning solution's safety data sheet (SDS) for specific handling and first aid information.
Продукт болееview
The CREWORKS 10L Ultrasonic Cleaner utilizes high-frequency sound waves (40 kHz) to create cavitation bubbles in the cleaning solution, providing thorough cleaning for various items. It features a built-in heater and timer for enhanced cleaning performance. The included CREWORKS Heavy Duty Cleaner & Degreaser solution is formulated to work effectively with ultrasonic cleaners.

Image: The CREWORKS 10L Ultrasonic Cleaner unit shown alongside a bottle of CREWORKS Heavy Duty Cleaner & Degreaser solution.
Основные характеристики
- Powerful Ultrasonic Cavitation: 40 kHz frequency for effective cleaning.
- Встроенный обогреватель: Adjustable temperature from 20-80°C (68-176°F) for improved cleaning.
- Цифровой таймер: Adjustable cleaning time from 1-30 minutes.
- Прочная конструкция: Food-grade 304 stainless steel tank for corrosion resistance and longevity.
- Интуитивно понятная панель управления: Easy-to-use interface for setting time and temperature.

Image: Close-up of the CREWORKS 10L Ultrasonic Cleaner's digital control panel, showing temperature and timer settings.

Image: Diagram illustrating the ultrasonic cavitation process, showing sound waves forming, expanding, and bursting bubbles to clean objects.
Настраивать
- Распаковка: Осторожно извлеките все компоненты из упаковки. Осмотрите их на предмет повреждений.
- Размещение: Place the ultrasonic cleaner on a stable, level, and dry surface. Ensure adequate ventilation around the unit.
- Подключение питания: Подсоедините шнур питания к заземленной электрической розетке.
- Заполнение бака:
- Убедитесь, что сливной клапан закрыт.
- Fill the stainless steel tank with the appropriate cleaning solution. For general cleaning, dilute the CREWORKS Heavy Duty Cleaner & Degreaser concentrate with water according to the instructions on the solution bottle (typically 1:10 to 1:20 dilution).
- Do not overfill; ensure the liquid level is below the MAX line and covers the items to be cleaned.
- Загрузка предметов: Place items to be cleaned into the cleaning basket. Avoid overcrowding. Ensure items do not touch the bottom of the tank directly.
Инструкция по эксплуатации
Using the Ultrasonic Cleaner
- Включение питания: Plug in the unit. The display will illuminate.
- Установить температуру (необязательно): Press the "TEMP" button to adjust the desired heating temperature (20-80°C / 68-176°F). The unit will begin heating.
- Установите время уборки: Press the "TIME" button to set the desired cleaning duration (1-30 minutes).
- Начать очистку: Press the "ON/OFF" button to start the ultrasonic cleaning process. The timer will count down.
- Остановить уборку: The unit will automatically stop when the timer reaches zero. You can also press "ON/OFF" again to stop manually.
- Слейте воду и промойте: Once cleaning is complete, unplug the unit. Open the drain valve to empty the used solution. Rinse the cleaned items thoroughly with clean water.
- Сушка: Dry the cleaned items completely before storage or use.
Using the CREWORKS Heavy Duty Cleaner & Degreaser Solution
This concentrated solution is designed for use with ultrasonic cleaners to remove stubborn grease, oil, and grime from various parts.
- Разбавление: Dilute the concentrate with water. A common starting ratio is 1 part solution to 10-20 parts water, depending on the level of contamination. Refer to the solution bottle for specific recommendations.
- Приложение: Suitable for cleaning engine parts, carburetors, gun parts, metals, plastics, electronic components, and bicycle chains.
- Безопасность: Always wear gloves and eye protection when handling the concentrated solution. Avoid prolonged skin contact.

Image: A bottle of CREWORKS Heavy Duty Cleaner & Degreaser surrounded by images of various items it can clean, such as carburetors, engine parts, and electronic components.

Image: A visual comparison showing a dirty bicycle chain and metal parts before cleaning, and the same items appearing clean and sparkling after ultrasonic cleaning.
Обслуживание
- Очистка резервуара: After each use, drain the tank and wipe it clean with a soft cloth. Do not use abrasive cleaners or scouring pads.
- Внешняя очистка: Протрите внешнюю часть агрегата рекламой.amp cloth. Do not allow water to enter the control panel or electrical components.
- Solution Storage: Store the CREWORKS Heavy Duty Cleaner & Degreaser solution in its original container, tightly sealed, in a cool, dry place, away from direct sunlight and out of reach of children.
- Регулярный осмотр: Periodically inspect the power cord and plug for any signs of damage.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Устройство не включается | Not plugged in; power outlet fault; damaged power cord | Check power connection; try a different outlet; contact customer support if cord is damaged |
| Ультразвуковая функция не работает | Tank empty or insufficient liquid; timer not set | Ensure tank is filled to appropriate level; set cleaning time |
| Плохой результат очистки | Incorrect solution dilution; insufficient cleaning time; water temperature too low; items overcrowded | Adjust solution concentration; increase cleaning time; increase temperature; clean items in smaller batches |
| Утечки в блоке | Drain valve not fully closed; damaged tank | Ensure drain valve is securely closed; contact customer support if tank is damaged |
Технические характеристики
- Модель: CREWORKS 10L Ultrasonic Cleaner
- Емкость бака: 10 литра
- Ультразвуковая мощность: 240 Вт
- Мощность нагрева: До 300 Вт
- Ультразвуковая частота: 40 кГц
- Диапазон температур: 20-80°C (68-176°F)
- Диапазон таймера: 1-30 минуты
- Материал резервуара: 304 Нержавеющая сталь
- Solution Volume: 34 жидкой унции (1000 мл)
Гарантия и поддержка
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official CREWORKS webсайт.
При обращении в службу поддержки, пожалуйста, укажите номер модели и дату покупки.
Утилизация
This product contains electrical and electronic components that should not be disposed of with general household waste. Please dispose of the unit and any used cleaning solutions according to local regulations.





