IBO Furiatka V1500 Submersible Pump User Manual

1. Введение

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your IBO Furiatka V1500 submersible pump. Please read these instructions carefully before using the product to ensure proper function and longevity.

The IBO Furiatka V1500 is a high-quality submersible pump designed for pumping domestic wastewater. It features a robust construction of stainless steel and cast iron, ensuring durability and resistance to corrosion. The integrated shredder effectively handles impurities, making it suitable for demanding applications. This kit includes the V1500 pump, a 30-meter hose, and a 2-inch connector.

Figure 1: IBO Furiatka V1500 submersible pump with included accessories.

2. Информация по технике безопасности

Во избежание травм и повреждения насоса всегда соблюдайте следующие меры предосторожности:

• Убедитесь, что источник питания соответствует объему насоса.tagе (230 В).
• Не используйте насос с поврежденным шнуром питания или вилкой.
• Never lift or carry the pump by its power cable. Use the handle provided.
• Keep hands and feet clear of the pump's inlet and shredder during operation.
• Перед выполнением любых работ по техническому обслуживанию или очистке отключите насос от источника питания.
• The pump is designed for domestic wastewater with a maximum temperature of 35°C. Do not use it for flammable liquids, corrosive chemicals, or water exceeding this temperature.
• Во время работы убедитесь, что насос полностью погружен в воду, чтобы предотвратить перегрев.

3. Настройка

Выполните следующие шаги для первоначальной настройки:

1. Распаковываем компоненты: Carefully remove the pump, 30-meter hose, and 2-inch connector from the packaging. Inspect all components for any signs of damage.
2. Присоедините шланг: Connect the 2-inch hose to the pump's outlet nozzle. Secure it firmly using appropriate clamps (not included) to prevent leaks and disconnections during operation.


Figure 2: The included 30-meter hose.



Figure 3: The 2-inch connector.

3. Положение насоса: Place the pump on a stable, flat surface in the liquid to be pumped. Ensure the pump is fully submerged and not resting directly on soft sediment, which could block the inlet.
4. Регулировка поплавкового выключателя: The pump is equipped with a float switch for automatic operation. Adjust the float switch cable length to set the desired ON/OFF levels. A shorter cable results in a smaller operating range, while a longer cable allows for a wider range. Ensure the float switch can move freely without obstruction.

Figure 4: The float switch, which controls automatic pump operation.
5. Подключение питания: Connect the pump's power cable to a grounded 230V electrical outlet.

4. Инструкция по эксплуатации

The IBO Furiatka V1500 pump operates automatically via its float switch:

• Once connected to power and submerged, the pump will start automatically when the water level rises and lifts the float switch to its 'ON' position.
• The pump will continue to operate until the water level drops, causing the float switch to fall to its 'OFF' position, at which point the pump will stop.
• The integrated shredder is designed to handle solid impurities in wastewater, preventing blockages and ensuring continuous flow.
• The pump is equipped with overload protection, which will automatically shut down the pump if it experiences excessive load or overheating, protecting the motor from damage.

5. Техническое обслуживание

Регулярное техническое обслуживание обеспечивает оптимальную производительность и продлевает срок службы насоса:

• Уборка: Periodically remove the pump from the liquid and clean any debris or sediment that may have accumulated around the inlet or the shredder. Ensure the shredder blades are free from obstructions.


Рисунок 5: Внизу view of the pump, highlighting the inlet and shredder.

• Проверка кабеля: Regularly inspect the power cable and float switch cable for any signs of wear, cuts, or damage. Replace immediately if damage is found.
• Хранилище: При длительном хранении насоса необходимо тщательно его очистить, слить всю воду и хранить в сухом, защищенном от мороза месте.
• Професиональные услуги: For any complex repairs or internal inspections, contact a qualified service technician. Do not attempt to open the motor housing yourself.

6. Поиск Неисправностей

If you encounter issues with your IBO Furiatka V1500 pump, refer to the following table:

7. Технические характеристики

Technical data for the IBO Furiatka V1500 submersible pump:

Рисунок 6: Этикетка продукта с подробными характеристиками.

8. Гарантия и поддержка

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. In case of technical issues or questions not covered in this manual, please contact the manufacturer or your authorized dealer for support.