Sylvania A19 LED Light Bulbs Instruction Manual

1. Введение

Thank you for choosing Sylvania A19 LED Light Bulbs. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.

2. Продукт закончилсяview

This package includes a combination of Sylvania A19 LED light bulbs designed to replace traditional incandescent bulbs. You will find both 40W equivalent (6W, 450 lumens) and 60W equivalent (8.5W, 800 lumens) bulbs, all featuring a soft white (2700K) color temperature and a standard medium (E26) base.

Image 1: Sylvania A19 LED Light Bulbs, showing both 40W and 60W equivalent bulbs in their packaging.

These energy-efficient bulbs offer instant illumination, long lifespan, and are free from UV/IR emissions, mercury, and lead.

3. Информация по технике безопасности

• Риск поражения электрическим током: Всегда отключайте питание светильника перед проверкой, установкой или снятием лампы.
• Только для использования в помещении: Эти лампочки предназначены для использования в помещении в сухих местах. Не используйте во влажных или сухих помещениях.amp за исключением случаев, когда светильник специально рассчитан на такие условия.
• Не подходит для закрытых светильников: Avoid using these bulbs in fully enclosed fixtures, as this can shorten their lifespan due to heat buildup.
• Нерегулируемый: These bulbs are non-dimmable. Do not use with dimmer switches, as this may cause damage to the bulb or dimmer.
• Рабочая температура: Suitable for operation in temperatures between -20°C and +40°C (-4°F and +104°F).
• Масса: Do not use in fixtures where the bulb's weight might exceed the fixture's capacity.

4. Настройка и установка

Installation of Sylvania A19 LED light bulbs is straightforward. Follow these steps:

1. Выключите питание: Locate the light switch or circuit breaker controlling the fixture and turn off the power completely.
2. Удалить старую лампочку: Осторожно выкрутите имеющуюся лампочку из патрона. Если лампочка недавно использовалась, дайте ей остыть.
3. Вставьте новую светодиодную лампочку: Gently screw the Sylvania A19 LED bulb into the socket until it is snug. Do not overtighten.
4. Восстановить мощность: Снова включите питание с помощью выключателя или автоматического выключателя.
5. Тест: Turn on the light switch to ensure the bulb illuminates correctly.

Image 2: A set of four Sylvania A19 LED light bulbs, ready for installation.

5. Инструкция по эксплуатации

Sylvania A19 LED light bulbs operate like traditional bulbs. Once installed, simply use the wall switch or fixture switch to turn the light on or off. These bulbs provide instant full brightness with no warm-up time.

6. Техническое обслуживание

These LED bulbs require minimal maintenance due to their long lifespan of up to 11,000 hours.

• Уборка: Для очистки лампочки убедитесь, что питание выключено и лампочка остыла. Аккуратно протрите мягкой сухой тканью. Не используйте жидкие чистящие средства или абразивные материалы.
• Замена: When the bulb reaches the end of its life, follow the installation steps in Section 4 to replace it with a new Sylvania A19 LED bulb. Dispose of old bulbs according to local regulations.

7. Поиск Неисправностей

If your Sylvania A19 LED bulb does not light up after installation, consider the following:

• Нет питания: Check if the light switch is in the 'ON' position. Verify that the circuit breaker for the fixture has not tripped.
• Ослабленное соединение: Turn off the power, then carefully re-screw the bulb into the socket to ensure a secure connection.
• Incorrect Fixture: Ensure the fixture is compatible with A19 bulbs and has a medium (E26) base.
• Диммер: Confirm that the fixture is not connected to a dimmer switch, as these non-dimmable bulbs are not compatible.
• Damaged Bulb: If the above steps do not resolve the issue, the bulb may be faulty. Replace it with a new one.

8. Технические характеристики

9. Гарантия и поддержка

For warranty information or technical support, please refer to the packaging or contact LEDVANCE customer service directly. Keep your purchase receipt as proof of purchase.