GOYOJO 60° Digital Gloss Meter (Model: MODEL) Instruction Manual

1. Введение

The GOYOJO 60° Digital Gloss Meter is a compact and precise instrument designed for measuring the gloss level of various surfaces. This device is suitable for applications in industries such as glass, mobile phones, ceramics, automobiles, and hardware. It features automatic calibration, a single 60° measuring angle, and a user-friendly interface for efficient operation.

This manual provides essential information on how to set up, operate, maintain, and troubleshoot your gloss meter to ensure accurate and consistent results.

2. Продукт закончилсяview

2.1 Компоненты

Familiarize yourself with the main components of your GOYOJO 60° Digital Gloss Meter:

Изображение 2.1: The gloss meter and its calibration board, highlighting the Display Screen, Calibrated State indicator, Test Port, USB Port, Calibration Board, and Hand Strap Fastener.

• Экран дисплея: Shows measurement readings, battery status, and operational modes.
• Calibrated State Indicator: Displays the current calibration status.
• Тестовый порт: The area where the gloss meter makes contact with the surface to be measured.
• USB-порт: Для зарядки устройства.
• Calibration Board: Used for automatic calibration of the device.
• Hand Strap Fastener: Для крепления ремешка.

2.2 Основные характеристики

• Экспресс-измерение: Single measurement time is less than 1 second.
• Увеличенный срок службы батареи: Capable of approximately 30,000 measurements on a single charge.
• Компактный и легкий: Weighs only 80 grams, designed for portability.
• Автоматическая калибровка: No manual calibration required; the device calibrates automatically upon power-on.
• Magnetic Suction Calibration Base: Ensures secure and accurate calibration, protecting against contamination.
• Универсальное применение: Suitable for measuring gloss on glass, mobile phones, ceramics, automotive finishes, and various hardware.

3. Настройка

3.1 Первоначальная зарядка

Before first use, ensure the gloss meter is fully charged. Connect the device to a USB power source using the provided USB cable. The battery indicator on the display will show charging status.

3.2 Включение

Press and hold the power button to turn on the device. The gloss meter will perform an automatic calibration upon startup.

3.3 Автоматическая калибровка

The device features intelligent automatic calibration. Simply place the gloss meter onto its magnetic suction calibration base. The device will automatically calibrate itself, ensuring accuracy for immediate measurements. Regular calibration is recommended to maintain long-term accuracy.

4. Инструкция по эксплуатации

4.1 Режим одиночного измерения

1. Убедитесь, что устройство включено и откалибровано.
2. Place the test port of the gloss meter firmly and flatly onto the surface to be measured.
3. Press the measurement button briefly. The gloss value will be displayed on the screen within 1 second.

4.2 Режим непрерывного измерения

For continuous monitoring of gloss levels:

Изображение 4.1: Press and hold the measurement button for 2 seconds to switch to continuous measurement mode.

1. With the device powered on, press and hold the measurement button for approximately 2 seconds.
2. The device will enter continuous measurement mode, providing real-time gloss readings as it is moved across a surface.
3. To exit continuous measurement mode, press the measurement button briefly again.

4.3 Чтение показаний дисплея

The LCD display shows the gloss unit (GU) value. Note that this model displays gloss readings in whole units (e.g., 83 GU), not with decimal places.

5. Техническое обслуживание

5.1 Очистка

• Use the provided cleaning cloth to gently wipe the test port and the calibration board.
• Ensure no dust or debris is present on the test port or calibration board, as this can affect measurement accuracy.
• Не используйте абразивные чистящие средства или растворители.

5.2 Хранение

Store the gloss meter in a clean, dry environment, away from extreme temperatures and direct sunlight. Always keep the calibration board clean and protected when not in use.

6. Поиск Неисправностей

• Непоследовательные показания: Ensure the test port and the surface being measured are clean. Re-calibrate the device by placing it on its calibration base. Ensure firm and flat contact with the surface during measurement.
• Устройство не включается: Check the battery level. If low, connect the device to a USB power source and charge it fully.
• Проблемы с отображением: If the display is blank or shows errors, try restarting the device. If the issue persists, contact customer support.
• No Change in Readings: Verify that the device is in the correct measurement mode (single or continuous). Ensure the surface is being measured correctly and that there is a detectable difference in gloss if expecting a change.

7. Технические характеристики

Изображение 7.1: Подробные параметры и размеры изделия.

8. Гарантия и поддержка

Информацию о гарантии и техническую поддержку можно получить в документации, прилагаемой к товару, или обратившись напрямую к продавцу. Сохраните чек на случай предъявления гарантийных претензий.