1. Введение
The M-VAVE SK2 is an isolated power supply unit designed for guitar effect pedals. It provides stable and low-noise power to multiple pedals simultaneously, ensuring optimal performance. This unit features independent power outputs and overcurrent protection for each channel, enhancing reliability and safety for your equipment.
Image 1.1: M-VAVE SK2 Isolated Guitar Pedal Power Supply.
2. Особенности
- 10 Isolated 9V DC Outputs: Provides clean and stable power to individual pedals, minimizing noise and interference. Each output delivers 300mA.
- 1 USB 5V Output: Dedicated 5V 1A USB output for powering compatible devices or charging.
- Независимая защита от перегрузки по току: Each output channel is equipped with independent overcurrent protection. If one channel experiences a short circuit, other channels remain operational.
- Светодиодные индикаторы состояния: Blue LED lights indicate the operational status of each channel. An LED will turn off if its corresponding channel experiences an overcurrent condition.
- Схема шумоподавления: Engineered to minimize unwanted noise, contributing to a superior audio experience.
- Прочная конструкция: Made from lightweight and robust aluminum alloy.
Изображение 2.1: оконченоview of the 11 independent power supply interfaces.
Image 2.2: Short circuit protection with LED indicators for normal operation and short circuit.
3. Содержимое упаковки
Проверьте наличие всех предметов в упаковке:
- M-VAVE SK2 Isolated Guitar Pedal Power Supply Unit
- Power Adapter (DC 12V 2A input)
- 10 кабелей питания постоянного тока (для подключения педалей)
Image 3.1: M-VAVE SK2 unit with its accessories.
4. Настройка
- Подключите адаптер питания: Plug the provided DC 12V 2A power adapter into the 'DC IN' port on the M-VAVE SK2 unit. Connect the other end of the adapter to a suitable power outlet.
- Connect Effect Pedals: Use the included DC power cables to connect your guitar effect pedals to the 10 isolated 9V DC outputs. Ensure the polarity of the cables matches your pedals' requirements (center negative is standard for most guitar pedals).
- Подключение USB-устройств (необязательно): If needed, connect a USB-powered device to the 5V 1A USB output port.
- Включение питания: Once all connections are secure, the blue LED indicators on the M-VAVE SK2 unit will illuminate, indicating that power is being supplied to the connected channels.
5. Операция
The M-VAVE SK2 operates automatically once connected to power and your pedals. Each blue LED light corresponds to an output channel. When a channel is functioning correctly, its LED will be lit. In the event of an overcurrent or short circuit on a specific channel, its corresponding LED light will turn off, indicating a fault without affecting the operation of other channels.
6. Информация по технике безопасности
- Use only the provided power adapter. Using an incorrect adapter may damage the unit or connected devices.
- Не подвергайте устройство воздействию воды, влаги или экстремальных температур.
- Не допускайте падений устройства и сильных ударов.
- Do not attempt to open or modify the unit. Refer servicing to qualified personnel.
- Обеспечьте надлежащую вентиляцию вокруг устройства во время работы.
7. Поиск Неисправностей
- No power to a pedal:
- Check if the LED indicator for that specific output channel is off. If it is, disconnect the pedal from that output and check the pedal for faults. The LED turning off indicates an overcurrent or short circuit on that channel. Reconnect the pedal only after resolving the issue.
- No power to any pedal:
- Ensure the power adapter is securely connected to both the M-VAVE SK2 unit and a working power outlet. Verify that the power adapter itself is functional.
- Unwanted noise in the audio signal:
- While the SK2 features noise reduction, external factors can still introduce noise. Ensure all cables are properly shielded and connected. Test pedals individually to identify if a specific pedal is generating noise. Check for ground loops in your setup.
8. Технические характеристики
| Параметр | Ценить |
|---|---|
| Номер модели | СК2 |
| Входная мощность | Напряжение постоянного тока 5–12 В (через адаптер 12 В 2 А) |
| Выходные каналы постоянного тока | 10 x DC 9V 300mA (isolated) |
| USB Output Channel | 1 х USB 5В 1А |
| Размеры продукта (Д x Ш x В) | 4 x 1.9 x 6 дюйма (158 x 50 x 25 мм) |
| Вес товара | 1.15 фунта (225 г) |
| Строительный материал | Алюминиевый сплав |
| Метод охлаждения | Воздух |
| Совместимые устройства | Гитарные педали эффектов |
Image 8.1: Dimensions of the M-VAVE SK2 unit.
Изображение 8.2: Верхняя и боковая части. view of the M-VAVE SK2 unit.
9. Техническое обслуживание
- Уборка: Для очистки внешней поверхности устройства используйте мягкую сухую ткань. Не используйте жидкие чистящие средства или растворители.
- Хранилище: В нерабочее время храните устройство в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.
- Управление кабелями: Ensure power cables are not kinked or strained to prevent damage.
10. Гарантия и поддержка
The M-VAVE SK2 Isolated Guitar Pedal Power Supply comes with a one-year warranty from the date of purchase. For any product-related issues or support inquiries, please contact M-VAVE customer service. When contacting support, provide your purchase details and a clear description of the issue.
