Baseus BS-CH001 10000mAh Car Jump Starter and Power Bank User Manual

Введение

The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.

Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.

Содержимое упаковки

Проверьте комплектацию на наличие следующих предметов:

• 1 x Baseus Car Jump Starter
• 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
• 1 х зарядный кабель USB-Type-C

Основные характеристики

• Высокая производительность: 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
• Многофункциональный: Acts as both a car jump starter and a portable power bank.
• Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
• Встроенный дисплей: Digital screen shows the remaining battery level of the jump starter.
• Устойчивость к экстремальным температурам: High-performance polymer battery cells ensure operation in very low and high temperatures.
• Расширенная безопасность: Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
• Низкий уровень энергопотребления в режиме ожидания: Retains up to 85% of stored energy after one year of non-use.
• Встроенная светодиодная подсветка: Can be used as an emergency flashlight.
• Портативный: Compact size and technical parameters allow it to be carried on an airplane.

Информация по безопасности

Перед использованием данного изделия ознакомьтесь со всеми предупреждениями и инструкциями по технике безопасности. Несоблюдение этих инструкций может привести к поражению электрическим током, возгоранию и/или серьёзным травмам.

• Не разбирайте, не модифицируйте и не ремонтируйте устройство.
• Не подвергайте устройство воздействию дождя или влаги.
• Не используйте устройство, если батарея разряжена.ampили кабели повреждены.
• Обеспечьте правильную полярность подключения (красный кл.amp к положительному, черный clamp to negative) to avoid short circuits.
• Хранить в недоступном для детей месте.
• Не запускайте замороженную батарею от рывка.
• Не подключайте положительный и отрицательный clampвместе.
• Используйте устройство в хорошо проветриваемом помещении.
• Remove the jump starter from the car battery immediately after starting the vehicle.
• Храните устройство в прохладном сухом месте, когда оно не используется.

Setup: Charging the Jump Starter

Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
3. The digital display will show the charging progress. Charge until the display indicates 100%.
4. После полной зарядки отсоедините зарядный кабель.

Operating Instructions: Car Jump Starting

Чтобы запустить автомобиль, внимательно следуйте этим шагам:

1. Шаг 1: Подключите Smart Clamp Кабель

   Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.

2. Step 2: Connect to Car Battery

   Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.
3. Step 3: Start the Vehicle

   Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.

4. Шаг 4: Отключитесь

   Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.

Инструкция по эксплуатации: Функция Power Bank

The Baseus BS-CH001 can also be used to charge your electronic devices.

1. Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
2. Подключите другой конец кабеля к вашему электронному устройству.
3. The jump starter will automatically begin charging your device. The digital display will show the remaining power.
4. Once charging is complete, disconnect your device and the cable.

Обслуживание

• Очистите устройство сухой мягкой тканью. Не используйте абразивные чистящие средства или растворители.
• Храните пусковое устройство в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.
• For optimal battery life, fully charge the device at least once every 3-6 months.
• Держите клamp cables clean and free from corrosion.

Поиск неисправностей

Технические характеристики

Гарантия и поддержка

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Baseus customer service through their official channels.

Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.