Axis Communications M5526-E

AXIS M5526-E User Manual

4MP Indoor/Outdoor PTZ Camera with 10x Zoom

1. Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications AXIS M5526-E PTZ Camera. The AXIS M5526-E is a high-performance 4-megapixel indoor/outdoor PTZ (Pan, Tilt, Zoom) camera designed for versatile surveillance applications, offering 10x optical zoom and continuous 360° pan capabilities.

2.Основные характеристики

3. Содержимое упаковки

Проверьте наличие всех предметов в упаковке:

4. Настройка и установка

4.1 Информация по технике безопасности

Always follow local regulations and safety guidelines during installation. Ensure power is disconnected before handling electrical connections. Installation should be performed by qualified personnel.

4.2 Установка камеры

The AXIS M5526-E is designed for ceiling mount installation. Use the provided mounting template to mark drilling holes. Secure the mounting bracket firmly to the ceiling using appropriate screws and anchors for the surface material. Ensure the camera is securely attached to the bracket.

AXIS M5526-E PTZ Camera

Рисунок 4.2.1: Передняя часть view of the AXIS M5526-E PTZ Camera, showcasing its dome design and lens.

4.3 Подключение к электросети и сети

Connect the camera to your network using an Ethernet cable. The camera supports Power over Ethernet (PoE), simplifying installation by delivering both power and data over a single cable. Alternatively, connect a 24V DC power supply to the designated power input if PoE is not used. Ensure all connections are secure and protected, especially for outdoor installations, utilizing the provided grommets for cable entry points.

AXIS M5526-E Camera installed in a hallway

Figure 4.3.1: The AXIS M5526-E camera mounted on a ceiling in a commercial hallway, demonstrating its discreet integration into an indoor environment.

AXIS M5526-E Camera installed near a reception desk

Figure 4.3.2: The AXIS M5526-E camera positioned above a reception area, illustrating its suitability for monitoring public spaces.

4.4 Начальная конфигурация

After connecting the camera, use the Axis IP Utility or a web browser to discover the camera on your network. Access the camera's web interface by entering its IP address. Follow the on-screen prompts to set up administrator credentials, network settings, and initial video configurations. Refer to the Axis Communications website for detailed software and configuration guides.

5. Эксплуатация камеры

5.1 Прямой эфир View и запись

Access the live video feed through the camera's web interface or a compatible Video Management System (VMS). Configure recording settings, including continuous recording, motion-triggered recording, or scheduled recording, based on your surveillance needs. The camera supports MP4 video capture format.

5.2 Управление панорамированием, наклоном и масштабированием (PTZ)

Control the camera's pan, tilt, and zoom functions using the PTZ controls available in the web interface or VMS. The camera offers continuous 360° pan, allowing for comprehensive coverage without blind spots. Utilize the 10x optical zoom to focus on specific areas of interest while maintaining image clarity.

5.3 дополнительных функций

Explore advanced features such as motion detection, tamper detection, and support for analytics with deep learning. Configure alert types and actions, such as email notifications or alarm triggers, to enhance security monitoring. The camera's ONVIF compliance ensures seamless integration with a wide range of third-party systems.

6. Техническое обслуживание

6.1 Очистка

Регулярно очищайте купол и корпус камеры мягкой тряпкой.amp cloth. Avoid abrasive cleaners or solvents that could damage the surface. For outdoor units, ensure the dome is free from dirt, dust, and water spots to maintain optimal image quality.

6.2 обновлений прошивки

Периодически проверяйте Axis Communications. website for firmware updates. Keeping the camera's firmware up-to-date ensures optimal performance, security enhancements, and access to new features. Follow the instructions provided by Axis for safe firmware upgrade procedures.

6.3 Проверки системы

Perform routine checks of the camera's network connection, power supply, and recording functionality to ensure continuous operation. Verify that recorded footage is accessible and stored correctly.

7. Поиск Неисправностей

ПроблемаВозможная причинаРешение
Нет видеопотокаPower issue, network cable disconnected, incorrect IP address.Check power supply/PoE, verify Ethernet cable connection, ensure correct IP address and network settings.
Плохое качество изображенияDirty lens/dome, improper focus, low light conditions, network bandwidth issues.Clean the dome, adjust focus if applicable, ensure adequate lighting, check network bandwidth.
Управление PTZ не отвечаетSoftware glitch, network latency, camera malfunction.Restart the camera, check network connection, update firmware. If problem persists, contact support.
Невозможно получить доступ web интерфейсIncorrect IP address, network firewall, camera not powered on.Verify IP address, check firewall settings, ensure camera is powered and connected to the network.

8. Технические характеристики

9. Информация о гарантии

Axis Communications products typically come with a limited hardware warranty. For specific warranty terms and conditions applicable to your AXIS M5526-E camera, please refer to the warranty documentation included with your product or visit the official Axis Communications webСохраните чек о покупке для предъявления гарантийных претензий.

10. Техническая поддержка

For technical assistance, troubleshooting, or further information regarding your AXIS M5526-E camera, please visit the official Axis Communications support portal. The website provides access to FAQs, knowledge base articles, software downloads, and contact information for direct support.

Webсайт: www.axis.com/support

Связанные документы - М5526-Э

Предварительноview Руководство по установке скрытого крепления AXIS TP3201-E
В этом руководстве содержатся инструкции по установке утопленного крепления AXIS TP3201-E, включая информацию по технике безопасности, правовые аспекты и пошаговые процедуры сборки для совместимых моделей камер AXIS.
Предварительноview Руководство по установке PTZ-камеры AXIS M5000-G
This document provides installation instructions for the AXIS M5000-G PTZ Camera, covering safety information, legal considerations, and step-by-step installation procedures.
Предварительноview Руководство по установке тепловизионных камер AXIS Q1971-E и Q1972-E
Подробное руководство по установке тепловизионных камер AXIS Q1971-E и AXIS Q1972-E, охватывающее вопросы безопасности, соответствия нормативным требованиям, монтажа и подключения.
Предварительноview Speaker Coverage Calculation Guide for Axis Communications Systems
A guide to calculating the optimal number of Axis Communications speakers for various project needs, covering basic and premium system requirements, mounting heights, and coverage areas.
Предварительноview Руководство по установке сетевой камеры AXIS Q6135-LE PTZ
В данном руководстве представлены инструкции по установке сетевой поворотной камеры AXIS Q6135-LE, включая информацию о безопасности, юридические аспекты и пошаговую процедуру установки.
Предварительноview AXIS Q6135-LE PTZ Network Camera Technical Dimensions
Detailed dimensional specifications and technical overview of the AXIS Q6135-LE PTZ Network Camera by Axis Communications, including measurements for installation and design.