1. Введение
Thank you for choosing the CREWORKS 2L Digital Ultrasonic Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.
2. Инструкции по технике безопасности
Всегда соблюдайте следующие меры предосторожности, чтобы предотвратить травмы или повреждение устройства:
- Не разбирайте устройство.
- Не используйте без присмотра.
- Always use sufficient fluid in the tank.
- Unplug before filling or draining.
- Не используйте устройство, если в резервуаре нет жидкости.
- Хранить в недоступном для детей месте.
- Не погружайте основной блок в воду или другие жидкости.
- Use only appropriate cleaning solutions. Avoid flammable or corrosive liquids.
- Убедитесь, что шнур питания не поврежден и правильно подключен к заземленной розетке.
Figure 2.1: The CREWORKS 2L Digital Ultrasonic Cleaner with its warning label, emphasizing safety precautions.
3. Продукт закончилсяview и особенности
The CREWORKS 2L Digital Ultrasonic Cleaner is designed for efficient and thorough cleaning of various items using ultrasonic technology. It features a durable stainless steel tank, digital controls, and multiple cleaning modes.
3.1 Основные характеристики
- Емкость 2 л: Suitable for a wide range of items.
- 60W Ultrasonic Power: Provides effective cavitation for deep cleaning.
- 100W Heating Function: Allows for temperature adjustment (20-80℃) to enhance cleaning.
- Цифровое управление: Intuitive panel for setting time (0-99 min) and temperature.
- Degassing Mode: Eliminates gas bubbles for improved cavitation efficiency.
- 7 Levels of Oscillation: Adjustable intensity for delicate to robust cleaning.
- Тихая работа: Thick tank design reduces noise to below 60 dB.
- 3 режимов уборки: Quick, Standard, and Deep for varied cleaning needs.
- Резервуар из нержавеющей стали марки 304: Гарантирует долговечность и безопасность для пищевых продуктов.
- Transparent Acrylic Lid: Allows real-time observation of the cleaning process.
Figure 3.1: Close-up of the digital control panel, highlighting the time and temperature displays, and control buttons.
Figure 3.2: Illustration of the ultrasonic cleaning principle, showing the formation, expansion, and bursting of microscopic bubbles for effective cleaning.
4. Настройка
Follow these steps to set up your ultrasonic cleaner:
- Распаковка: Осторожно извлеките устройство из упаковки. Осмотрите его на предмет повреждений.
- Размещение: Place the cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation.
- Подключение питания: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before plugging in.
- Заполнение бака: Open the lid and fill the stainless steel tank with the appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill or underfill.
- Вставить корзину: If using, place the cleaning basket into the tank.
Figure 4.1: The ultrasonic cleaner with its lid open, showing the stainless steel tank and the included cleaning basket.
5. Инструкция по эксплуатации
Operating your CREWORKS ultrasonic cleaner is straightforward:
5.1 Основные операции
- Включение питания: Turn on the main power switch located at the back or side of the unit. The digital display will illuminate.
- Разместить предметы: Carefully place the items to be cleaned into the cleaning basket, ensuring they are fully submerged in the solution but not touching each other or the tank bottom directly.
- Установить температуру (необязательно): Press the "T/°C" button to adjust the desired cleaning temperature (20-80℃) using the up/down arrows. Heating will begin automatically.
- Установить время: Use the "TIME" up/down arrows to set the cleaning duration (0-99 minutes).
- Выберите режим (необязательно): Choose from "QUICK" (5 min), "STD" (15 min), or "EXT" (30 min) preset modes if desired.
- Начать очистку: Press the "START" button to begin the ultrasonic cleaning cycle. The display will show the remaining time.
- Конец цикла: Устройство автоматически остановится, когда таймер достигнет нуля.
- Удалить элементы: Carefully remove the cleaning basket and rinse the cleaned items under clean water.
- Выключение: Turn off the main power switch and unplug the unit when not in use.
5.2 Degassing Mode
The Degassing mode removes air bubbles from the cleaning solution, which can interfere with ultrasonic cavitation, making the cleaning process more efficient, especially with new solutions. Press the "DEGAS" button to activate this mode. It is recommended to run degassing for a few minutes before starting a cleaning cycle with fresh solution.
Figure 5.1: Visual representation of the degassing process, where air bubbles are removed from the cleaning solution to optimize ultrasonic performance.
5.3 Adjustable Oscillation
The unit offers 7 levels of oscillation intensity. This allows you to select a gentler cleaning for delicate items or a more powerful one for heavily soiled objects. Adjust the oscillation intensity using the dedicated knob or buttons on the control panel, if available, or by selecting the appropriate cleaning mode.
Figure 5.2: Illustration demonstrating the 7-level oscillation adjustment, allowing users to customize cleaning intensity for various items, from delicate jewelry to robust tools.
6. Техническое обслуживание и уход
Правильный уход обеспечивает долговечность и оптимальную производительность вашего ультразвукового очистителя.
- Слив бака: After each use, especially if the solution is dirty, unplug the unit and carefully drain the liquid from the tank.
- Очистка резервуара: Wipe the inside of the tank with a soft cloth. For stubborn residues, use a mild detergent and rinse thoroughly. Do not use abrasive cleaners.
- Внешняя очистка: Протрите внешнюю часть агрегата рекламой.amp ткань. Не используйте агрессивные химикаты.
- Хранилище: Храните устройство в прохладном, сухом месте, когда оно не используется. Убедитесь, что резервуар пустой и сухой.
- Регулярный осмотр: Периодически проверяйте шнур питания и вилку на предмет наличия признаков повреждения.
Figure 6.1: Demonstrates the visible cleaning effect of the ultrasonic cleaner on items like glasses, razor blades, and circuit boards, showing their improved cleanliness after use.
7. Поиск Неисправностей
If you encounter issues with your ultrasonic cleaner, refer to the following table:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Блок не включается. | Отсутствует питание; выключатель питания выключен; поврежден шнур питания. | Check power outlet; Ensure power switch is ON; Inspect power cord for damage. |
| Плохие результаты очистки. | Insufficient cleaning solution; Incorrect temperature; Items too crowded; Solution needs degassing. | Add more solution; Adjust temperature; Clean fewer items at a time; Activate Degas mode. |
| Устройство останавливается во время работы. | Timer expired; Overheating protection activated. | Reset timer; Allow unit to cool down before restarting. |
| Необычный шум во время работы. | Items touching tank bottom or each other; Insufficient liquid. | Ensure items are in basket and not touching tank; Add more liquid. |
8. Технические характеристики
Detailed technical specifications for the CREWORKS 2L Digital Ultrasonic Cleaner:
| Особенность | Ценить |
|---|---|
| Номер модели | DUC-S002 |
| Объем бака | 2 литра |
| Ультразвуковая мощность | 60 Вт |
| Мощность нагрева | 100 Вт |
| Ультразвуковая частота | 40 кГц |
| Диапазон температур | 20–80 ℃ (68–176 °F) |
| Диапазон таймера | 0-99 минуты |
| Материал бака | 304 Нержавеющая сталь |
| Уровень шума | Ниже 60 дБ |
| Размеры изделия (приблизительные) | 27 x 22.2 x 19.7 см (10.6 x 8.7 x 7.8 дюймов) |
| Вес продукта (прибл.) | 2.8 кг (6.2 фунта) |
Figure 8.1: Dimensional diagram of the ultrasonic cleaner and its cleaning basket, providing precise measurements for planning and usage.
9. Информация о гарантии
This product comes with a standard manufacturer's warranty. For details regarding warranty coverage, duration, and claims, please refer to the warranty card included with your purchase or contact CREWORKS customer support directly. Keep your proof of purchase for warranty validation.
10. Поддержка клиентов
For any questions, technical assistance, or service requests, please contact CREWORKS customer support. Contact information can typically be found on the product packaging, the official CREWORKS webсайте или через точку покупки.
Производитель: КРЕВЕРКИ
ASIN: B0CTSVGC2Z
