Введение
Welcome to the user manual for your Montech AX 140 ARGB Standard Fan. This document provides essential information for the proper installation, operation, and maintenance of your new cooling fan. Please read this manual thoroughly before installation and retain it for future reference.
Информация по безопасности
Во избежание повреждения изделия или травм соблюдайте следующие правила техники безопасности:
- Always disconnect your computer from the power supply before installing or handling internal components.
- Handle the fan and its components with care to avoid damage to delicate parts.
- Для предотвращения повреждений, вызванных электростатическим разрядом (ЭСР), необходимо обеспечить надлежащее заземление.
- Do not expose the fan to liquids or excessive moisture.
- Хранить в недоступном для детей месте.
Содержимое упаковки
Пожалуйста, проверьте наличие всех предметов в вашей посылке:
- Montech AX 140 ARGB Standard Fan
- Крепежные винты
Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | Монтеч |
| Номер модели | AX140B |
| Размер вентилятора | 140 мм |
| Максимальная скорость вращения | 1600 об/мин |
| Уровень шума | 27 дБ |
| Тип разъема питания | 4-Pin PWM |
| Тип разъема ARGB | 3-контактный 5 В адресный RGB-светодиод |
| Томtage | 12 Вольт (постоянный ток) |
| Ватtage | 32.6 Вт |
| Метод охлаждения | Воздух |
| Совместимые устройства | Рабочий стол |
| Материал | Пластик |
Настройка и установка
Идентификация компонентов
The Montech AX 140 ARGB fan consists of the fan frame, fan blades, and integrated ARGB lighting. It features a 4-Pin PWM connector for fan speed control and a standard 3-Pin 5V ARGB connector for lighting synchronization.
Рисунок 1: В разобранном виде view of the Montech AX 140 ARGB fan, illustrating its main components including the fan blades, motor, and the ARGB illuminated frame.
Монтаж вентилятора
- Ensure your computer system is powered off and disconnected from the main power supply.
- Identify the desired mounting location within your PC case. Common locations include front, rear, top, or bottom fan mounts.
- Position the Montech AX 140 ARGB fan against the mounting holes, ensuring the airflow direction is correct for your cooling setup (typically, the side with the frame supports and sticker indicates exhaust).
- Secure the fan using the provided mounting screws. Tighten screws evenly to prevent vibration.
Рисунок 2: Передняя часть view of the Montech AX 140 ARGB fan, highlighting the fan blades and the vibrant ARGB lighting ring.
Подключение вентилятора
- Locate an available 4-Pin fan header on your motherboard. Connect the fan's 4-Pin PWM cable to this header. This allows the motherboard to control fan speed.
- Locate an available 3-Pin 5V ARGB header (Addressable RGB) on your motherboard. Connect the fan's ARGB cable to this header. Ensure correct polarity to avoid damage. Не подключайте к разъему 12V RGB.
- If your motherboard does not have an ARGB header, you may need a separate ARGB controller (not included) to manage the lighting effects.
Рисунок 3: Сзади view of the Montech AX 140 ARGB fan, displaying the central motor hub with product information and the attached power and ARGB cables.
Инструкция по эксплуатации
Регулировка скорости вращения вентилятора (ШИМ)
The Montech AX 140 ARGB fan utilizes Pulse Width Modulation (PWM) for precise speed control. Once connected to a 4-Pin PWM header on your motherboard, you can manage the fan speed through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer. This allows for dynamic adjustment of fan speed based on system temperature, optimizing cooling performance and noise levels.
Управление ARGB-подсветкой
The Addressable RGB (ARGB) lighting can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard's software is up-to-date for the best lighting customization experience.
Обслуживание
Уборка
To maintain optimal performance and airflow, regularly clean your Montech AX 140 ARGB fan:
- Выключите компьютер и отсоедините его от источника питания.
- Use compressed air to gently remove dust accumulation from the fan blades and frame. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- For stubborn dirt, a soft, dry cloth can be used. Avoid using liquid cleaners directly on the fan.
Поиск неисправностей
Вентилятор не вращается
- Check if the 4-Pin PWM connector is securely attached to the motherboard fan header.
- Убедитесь, что разъем для подключения вентилятора включен в настройках BIOS/UEFI вашей материнской платы.
- Ensure the system is receiving power.
ARGB-подсветка не работает
- Confirm the 3-Pin 5V ARGB connector is correctly plugged into a compatible ARGB header on your motherboard. Ensure it is нет connected to a 12V RGB header.
- Проверьте программное обеспечение управления ARGB на вашей материнской плате, чтобы убедиться, что эффекты подсветки включены и настроены.
- If using an external ARGB controller, ensure it is properly powered and configured.
Гарантия и поддержка
For warranty information or technical support, please refer to the official Montech website or contact Montech customer service. Keep your proof of purchase for warranty claims.
