Rittal 3179.800 Blue e+ S Wall-Mounted Cooling Unit

1. Продукт закончилсяview

The Rittal 3179.800 Blue e+ S wall-mounted cooling unit is designed for efficient thermal management in electrical enclosures and industrial settings. This unit provides powerful cooling to maintain optimal temperatures, ensuring the longevity and performance of your equipment.

Ключевые особенности включают в себя:

• Мощность охлаждения: Powerful 1,706.07 BTU/hr cooling unit for efficient thermal management.
• Универсальная мощность: Двойной объемtage compatibility with 110/240V and 50/60Hz frequency for flexible installation options.
• Компактный дизайн: Wall-mounted unit measuring 22.4 inches in height, 11.8 inches in width, and 7.83 inches in depth.
• Тип крепления: Easy-to-install wall-mounted configuration ideal for industrial and commercial applications.
• Series Features: Part of the Blue e+ S series, incorporating advanced cooling technology for optimal temperature control.

Рисунок 1.1: Передняя часть view of the Rittal 3179.800 Blue e+ S Wall-Mounted Cooling Unit.

2. Информация по технике безопасности

Please read all safety instructions carefully before installing, operating, or performing maintenance on the cooling unit. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

• Перед выполнением любых работ по установке или техническому обслуживанию убедитесь, что электропитание отключено.
• Установка должна выполняться квалифицированным персоналом в соответствии со всеми местными и национальными электротехническими нормами.
• Do not block air inlets or outlets of the unit. Maintain adequate clearance for proper airflow.
• Не эксплуатируйте устройство, если оно повреждено или неисправно.
• Keep hands and tools away from moving parts during operation.

3. Содержимое упаковки

Убедитесь, что все компоненты присутствуют и не повреждены при распаковке. В упаковке должно быть:

• 1 x Rittal 3179.800 Blue e+ S Wall-Mounted Cooling Unit
• Руководство по эксплуатации (данный документ)
• Крепежные элементы (если имеются, проверьте упаковку)

4. Настройка и установка

The Rittal 3179.800 is designed for wall-mounted installation. Proper installation is crucial for optimal performance and safety.

4.1 Выбор места

• Choose a location that allows for adequate airflow around the unit.
• Ensure the mounting surface is structurally sound and can support the weight of the unit (approximately 28.7 pounds).
• Consider proximity to the electrical enclosure requiring cooling and power source.

4.2 Монтаж устройства

1. Refer to the provided mounting template (if included) for precise drilling locations.
2. Securely fasten the unit to the wall using appropriate mounting hardware.
3. Ensure the unit is level and stable after mounting.

4.3 Электрическое подключение

This unit supports dual voltage 110/240V and 50/60Hz frequency. Ensure the power supply matches the unit's requirements.

• Connect the unit to a dedicated power circuit with appropriate overcurrent protection.
• Вся проводка должна соответствовать местным и национальным электротехническим нормам.
• Обеспечьте надлежащее заземление устройства.

Figure 4.1: Dimensions of the Rittal 3179.800 Cooling Unit (22.4" H x 11.8" W x 7.83" D).

5. Инструкция по эксплуатации

Once installed and powered, the Rittal 3179.800 cooling unit will begin to regulate the temperature within the enclosure.

5.1 Первоначальное включение

1. After completing the electrical connections, restore power to the unit.
2. The unit will typically initiate a self-test and then begin operation.

5.2 Контроль температуры

The Blue e+ S series incorporates advanced cooling technology for optimal temperature control. The unit is designed to maintain a set temperature within the enclosure. Specific temperature adjustment procedures may vary; refer to the unit's display or remote control interface for detailed instructions.

This model features a remote control capability for convenient temperature adjustments and monitoring.

6. Техническое обслуживание

Regular maintenance ensures the efficient and reliable operation of your cooling unit. Always disconnect power before performing any maintenance.

• Очистка/замена фильтра: Periodically check and clean or replace the air filters to ensure proper airflow and cooling efficiency. The frequency depends on the operating environment.
• Очистка катушки: Inspect the condenser and evaporator coils for dust and debris. Clean them gently with a soft brush or compressed air if necessary.
• Дренажная система: Ensure the condensate drain is clear and free of obstructions to prevent water buildup.
• Визуальный осмотр: Regularly inspect the unit for any signs of damage, loose connections, or unusual noises.

7. Поиск Неисправностей

This section provides solutions to common issues you might encounter with your cooling unit. For problems not listed here, contact customer support.

8. Технические характеристики

Detailed technical specifications for the Rittal 3179.800 Blue e+ S Wall-Mounted Cooling Unit:

9. Гарантия и поддержка

This product is backed by Rittal's commitment to quality and customer satisfaction.

9.1 Политика возврата

The Rittal 3179.800 cooling unit is eligible for a 30-day free return policy, offering a refund or replacement. Please refer to the retailer's specific return guidelines for detailed terms and conditions.

9.2 Поддержка клиентов

For technical assistance, troubleshooting, or warranty claims, please contact Rittal customer support. You can find contact information on the official Rittal webчерез сайт или через поставщика вашей продукции.

Additional resources, including a fact sheet, may be available for download from the product's listing page or the manufacturer's webсайт. Для бывшегоample, a Fact Sheet (Provider) (PDF) is available at https://manuals.plus/m/ee7c89404f9390aa9d124dbed31043e847073a35a8536e01784765d6c477ed06.