Руководство пользователя комплекта видеодомофона Fermax F1391 SEE-U с диагональю экрана 7 дюймов

1. Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fermax F1391 7-inch SEE-U Video Intercom Kit. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety. This kit is designed to provide secure and convenient communication with visitors at your entrance.

2. Продукт закончилсяview

2.1. Компоненты

The Fermax F1391 SEE-U Video Intercom Kit includes the following main components:

• 7-inch Hands-Free Monitor: An indoor unit with a color screen and capacitive touch buttons.
• Наружная панель: A robust, weather-resistant unit with an integrated wide-angle color camera, night vision, and a call button.
• Адаптер питания: Supplies power to the system.
• Съемные клеммные колодки: Facilitate easy wiring connections.

Figure 1: Fermax F1391 SEE-U Video Intercom Kit components: outdoor panel and indoor monitor.

2.2.Основные характеристики

The Fermax F1391 SEE-U Video Intercom Kit offers several features for enhanced security and convenience:

• Plug-in System: Спроектирован для простой установки.
• Взаимосвязь: Allows communication between multiple indoor monitors within the same dwelling (supports up to 4 additional monitors without extra power).
• Dual Door Opening: Capability to open both a main and a secondary door.
• "Do Not Disturb" Mode: Mutes incoming call notifications on the indoor monitor.
• Настраиваемые мелодии: Choose from up to 16 different call melodies with adjustable volume and repetition duration (up to 30 seconds).
• Прочная наружная панель: Robust and waterproof (IP54 IK07) design with a protective visor and wide-angle color camera (H=115°, V=65°, D=130°) with night vision for clear visibility in low light.

3. Настройка и установка

3.1. Меры предосторожности

Before beginning installation, ensure that the main power supply to the installation area is disconnected to prevent electrical shock. If you are unsure about any steps, consult a qualified electrician.

3.2. Монтаж наружной панели

The outdoor panel should be mounted at a height that allows for optimal viewing of visitors. The recommended installation height is between 1650 mm and 1700 mm from the ground, with a distance of approximately 500 mm from any adjacent wall.

1. Choose a suitable location for the outdoor panel, ensuring it is protected from direct impact and excessive moisture.
2. Mark the drilling points on the wall using the mounting template or the panel itself.
3. Просверлите отверстия и вставьте прилагаемые дюбели.
4. Secure the mounting bracket or the panel directly to the wall using the provided screws.

Figure 2: Recommended installation height for outdoor panel and indoor monitor.

3.3. Установка внутреннего монитора

The indoor monitor should be mounted at a comfortable viewing height. The recommended installation height is approximately 1450 mm from the ground, with a distance of approximately 500 mm from any adjacent wall.

1. Select a location for the indoor monitor, typically near the main entrance or in a central area.
2. Отметьте места для сверления отверстий под кронштейн крепления монитора.
3. Просверлите отверстия и вставьте дюбели.
4. Прикрепите монтажный кронштейн к стене.
5. Connect the wiring to the monitor before securing it to the bracket.

3.4. Проводные соединения

The Fermax F1391 kit uses a 2-wire system for communication between the outdoor panel and the indoor monitor. Ensure all connections are secure and correctly polarized.

1. Outdoor Panel Wiring: Connect the 2-wire bus cable to the designated terminals on the back of the outdoor panel. If connecting a door lock, connect its wires to the appropriate terminals.
2. Indoor Monitor Wiring: Connect the 2-wire bus cable from the outdoor panel to the corresponding terminals on the back of the indoor monitor.
3. Подключение адаптера питания: Plug the power adapter into a standard electrical outlet and connect its output cable to the power input on the indoor monitor.

Figure 3: Detailed wiring diagram for the system components.

Рисунок 4: Сзади view of the outdoor panel showing wiring terminals.

Рисунок 5: Сзади view of the indoor monitor showing wiring terminals.

4. Инструкция по эксплуатации

Once installed and powered on, your Fermax F1391 SEE-U Video Intercom Kit is ready for use.

4.1. Прием звонка

When a visitor presses the call button on the outdoor panel, the indoor monitor will ring and display the visitor's image.

4.2. Ответ на звонок

Нажмите Отвечать button (typically represented by a phone icon) on the indoor monitor to establish two-way audio and video communication with the visitor.

4.3. Viewing the Outdoor Panel

К view the outdoor panel camera feed without an incoming call, press the View button (typically an eye icon) on the indoor monitor. This allows you to check your entrance at any time.

4.4. Door Opening

To open the main door, press the Дверной Релиз button (typically a key icon) on the indoor monitor. If configured, a secondary door release button may also be available for an additional entrance.

4.5. Intercommunication (Multiple Monitors)

If multiple indoor monitors are installed within your dwelling, you can initiate calls between them for internal communication. Refer to the monitor's on-screen menu for specific instructions on initiating intercommunication calls.

4.6. Настройки монитора

The 7-inch indoor monitor features a user-friendly interface with capacitive buttons for various settings:

• Регулировка громкости: Adjust the call and communication volume.
• Выбор мелодии: Choose from 16 different ringtone melodies.
• "Do Not Disturb" Mode: Activate or deactivate this mode to silence incoming calls.
• Настройки отображения: Adjust screen brightness, contrast, and color saturation.

Figure 6: Indoor monitor interface displaying settings options.

5. Техническое обслуживание

Regular maintenance ensures the longevity and optimal performance of your video intercom system.

• Очистка монитора: Для очистки экрана монитора используйте мягкую сухую безворсовую ткань.asing. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the surface.
• Cleaning the Outdoor Panel: Periodically wipe the outdoor panel, including the camera lens and call button, with a soft, damp cloth to remove dirt and debris. Ensure the camera lens is clear for optimal image quality. Do not use high-pressure water jets.
• Условия окружающей среды: Ensure the outdoor panel is not obstructed by plants or other objects that could block the camera's view or the microphone/speaker.

6. Поиск Неисправностей

If you encounter issues with your Fermax F1391 SEE-U Video Intercom Kit, refer to the following troubleshooting guide:

7. Технические характеристики

Technical specifications for the Fermax F1391 SEE-U Video Intercom Kit:

Figure 7: Indoor monitor dimensions (in millimeters).

Figure 8: Outdoor panel dimensions (in millimeters).

8. Гарантия и поддержка

Fermax products are manufactured to high-quality standards. This product is supported by a commitment to spare parts availability for 5 years from the date of purchase.

For technical assistance, warranty claims, or further support, please contact Fermax customer service. Refer to the product packaging or the official Fermax webсайт для получения контактной информации, специфичной для вашего региона.