1. Введение
This manual provides detailed instructions for the assembly, operation, and maintenance of your Barska Winbest Pursuit-200 Metal Detector Field Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Pursuit-200 Metal Detector Field Kit is designed for detecting various metals and includes a main metal detector with an LCD display, a handheld wand detector, headphones, a folding shovel, and a soft carrying case.
2. Содержимое упаковки
Убедитесь, что в вашей посылке присутствуют все перечисленные ниже предметы:
- Barska Winbest Pursuit-200 Metal Detector (Main Unit)
- Surveyor-100 Handheld Wand Metal Detector
- Наушники
- Folding Shovel with Compass
- Мягкий футляр
- Руководство пользователя (этот документ)
Изображение 2.1: All components of the Barska Winbest Pursuit-200 Metal Detector Field Kit, including the main detector, wand detector, headphones, shovel, and carrying case.
3. Настройка
3.1. Assembling the Main Metal Detector
- Прикрепите поисковую катушку: Secure the search coil to the lower stem using the provided bolt and nut. Ensure it is firmly attached but allows for slight angle adjustment.
- Соедините нижний и средний стебли: Insert the lower stem into the middle stem and secure it with the spring clip or locking mechanism.
- Attach the Control Housing: Slide the control housing onto the upper stem. Adjust the armrest for comfort and secure the control housing in place.
- Обмотайте кабель: Carefully wrap the search coil cable around the stem, ensuring it is not too tight or loose, and plug the connector into the control housing.
- Установите батареи: Open the battery compartment on the control housing and insert the required batteries (refer to specifications for battery type).
Изображение 3.1: The main metal detector fully assembled, showing the search coil, stem, armrest, and control housing.
3.2. Preparing the Wand Detector
The Surveyor-100 Wand Metal Detector typically requires battery installation. Open the battery compartment, insert the correct batteries, and close the compartment securely.
Изображение 3.2: The handheld wand metal detector, showing its compact design and control buttons.
3.3. Preparing the Folding Shovel
Unfold the shovel and secure its locking mechanisms to ensure it is rigid for use. The shovel can be configured as a shovel or a pick. The compass is integrated into the handle.
Изображение 3.3: The multi-use folding shovel, shown in both shovel and pick configurations.
4. Инструкция по эксплуатации
4.1. Main Metal Detector Operation
Изображение 4.1: Close-up of the Pursuit-200 metal detector's LCD display and control panel, showing buttons for DISC, NOTCH, SENS, and volume knob.
- Включение питания: Turn the VOLUME knob clockwise to power on the detector.
- Adjust Sensitivity (SENS): Press the SENS button and use the '+' and '-' buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
- Discrimination (DISC): Press the DISC button and use '+' and '-' to set the discrimination level. This feature allows the detector to ignore certain types of metal (e.g., iron). The LCD will show the target ID.
- Notch: Use the NOTCH function to selectively eliminate specific metal categories from detection.
- Наушники: Plug the included headphones into the 'PHONE' jack for private listening and clearer audio signals.
- Подметание: Держите детектор так, чтобы поисковая катушка была параллельна земле, примерно на 1-2 см над поверхностью. Медленно перемещайте катушку из стороны в сторону по перекрывающимся дугам.
- Целевое показание: When a metal object is detected, the detector will emit an audible tone, and the LCD display will show a target ID and signal strength.
- Водонепроницаемая поисковая катушка: The 10-inch search coil is weather-sealed and can be submerged in shallow water for detection. Ensure the control housing is not submerged.
4.2. Wand Detector Operation
Изображение 4.2: A hand holding the Surveyor-100 wand detector, demonstrating its ergonomic design for pinpointing targets.
- Включение питания: Press the Power ON/OFF button to activate the wand detector.
- Точное определение: After locating a general area with the main detector, use the wand detector to precisely pinpoint the target's location in the soil.
- Показания: The wand detector will typically use audible alerts and/or vibration, along with LED indicators, to signal the presence of metal.
4.3. Shovel Usage
Use the folding shovel to excavate detected targets. Its compact design and pick function are useful for breaking up tough ground. The integrated compass can assist with navigation.
5. Техническое обслуживание
- Уборка: Wipe down the detector and accessories with a damp Протирайте салфеткой после каждого использования. Избегайте абразивных чистящих средств.
- Хранилище: Store the kit in the provided soft carrying case in a dry, cool place when not in use.
- Уход батареи: Remove batteries from both detectors if they will not be used for an extended period to prevent leakage.
- Проверка кабеля: Regularly check the search coil cable for any signs of wear or damage.
6. Поиск Неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| No power to main detector/wand detector | Разряженные или неправильно установленные батареи | Замените батарейки новыми, соблюдая правильную полярность. |
| Erratic signals or false positives | High sensitivity, electromagnetic interference, mineralized ground | Reduce sensitivity. Move away from power lines or other electronic devices. Use discrimination settings. |
| Detector not finding metal | Low sensitivity, incorrect discrimination settings, search coil not parallel to ground | Increase sensitivity. Adjust discrimination settings. Ensure search coil is swept correctly. |
| Нет звука в наушниках | Headphones not plugged in correctly, volume too low, faulty headphones | Ensure headphones are fully plugged in. Increase volume. Test with another pair of headphones if available. |
7. Технические характеристики
- Модель: Pursuit-200 (BE12748)
- Бренд: Барская
- Размер поисковой катушки: 10 inches (Waterproof)
- Отображать: ЖК-дисплей
- Источник питания: Питание от батареек (требуются батарейки: да)
- Регулируемая длина: Yes, up to 47 inches
- Материал: Металл
- Вес товара: Примерно 0.4 килограмма (14.1 унции)
- Размеры продукта: 10"Д x 9.5"Ш x 48.42"В (в собранном виде)
- Международный рейтинг защиты: IP541 (for search coil)
- Входящие в комплект аксессуары: Surveyor-100 Wand Detector, Headphones, Folding Shovel with Compass, Soft Carrying Case
8. Информация по технике безопасности
- Перед проведением обыска на частной территории всегда следует получать разрешение.
- Be aware of local regulations regarding metal detecting.
- При проведении земляных работ следует проявлять осторожность, чтобы не повредить подземные коммуникации или исторические артефакты.
- Do not use the metal detector near live electrical wires or in hazardous environments.
- Храните батарейки в недоступном для детей месте и утилизируйте их надлежащим образом.
9. Гарантия и поддержка
For warranty information and customer support, please refer to the official Barska webили обратитесь в службу поддержки клиентов. Сохраните чек в качестве подтверждения покупки.
Barska Official Webсайт: www.barska.com
