Инструкция по эксплуатации раздвижных деревянных детских ворот Badabulle Deco Pop

1. Введение и окончаниеview

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Badabulle Deco Pop Extendable Wooden Baby Gate. This gate is designed to secure openings between 63 cm and 106 cm wide without requiring additional extensions. It offers two installation methods: screw-mounted for permanent fixture and pressure-fit for temporary use.

Image 1: Badabulle Deco Pop Extendable Wooden Baby Gate in use.

2. Предупреждения о безопасности

• This safety barrier complies with standard EN 1930:2011.
• This safety barrier is designed for domestic use only.
• This safety barrier is designed for children under 24 months of age.
• ПРЕДУПРЕЖДЕНИЕ: Never use without the fixing cups.
• ПРЕДУПРЕЖДЕНИЕ: Read the instructions before installation, as incorrect installation can be dangerous.
• ПРЕДУПРЕЖДЕНИЕ: This safety barrier must never be mounted across window openings.
• Ensure all locking mechanisms are securely engaged before leaving a child unattended.
• Regularly check the gate for any loose parts or damage. Discontinue use if damaged.

3. Особенности продукта

• Регулируемая ширина: Extends from 63 cm to 106 cm, eliminating the need for additional extensions.
• Варианты двойной установки: Can be screw-mounted for permanent use (e.g., stairs) or pressure-fit for temporary use (e.g., doorways).
• Удобное открывание: Ergonomic handle allows for one-handed operation when screw-mounted, opening in both directions.
• No Trip Bar: Designed without a bottom trip bar to minimize tripping hazards.
• Быстрая сборка: Designed for quick and straightforward assembly.

Image 2: Gate showing its extendable width from 63 cm to 106 cm.

4. Настройка и установка

Before beginning installation, carefully measure the opening where the gate will be placed. The Badabulle Deco Pop gate is suitable for openings between 63 cm and 106 cm.

4.1. Компоненты закончилисьview

Перед началом сборки убедитесь в наличии всех компонентов.

Изображение 3: оконченоview of gate components.

4.2. Этапы сборки

Follow these general steps for assembling the gate. Refer to the detailed instructions for your chosen installation method.

Image 4: Assembly diagram.

4.3. Screw-Mounted Installation (Permanent Fixture)

This method involves drilling into the wall for a secure, permanent installation, ideal for stairs or high-traffic areas. This allows the gate to open like a door. Refer to the video below from 0:21 to 1:43 for a visual guide on measurements and screw-mounted installation.

1. Measure and mark the desired height and width for the gate.
2. Position the wall-mounted brackets and mark the drill holes.
3. Просверлите отверстия и вставьте дюбели.
4. Secure the wall-mounted brackets with screws.
5. Attach the gate to the installed brackets, ensuring it swings freely and latches securely.

4.4. Pressure-Fit Installation (Temporary Use)

This method uses pressure to secure the gate without drilling, suitable for occasional use or when drilling is not an option. This installation allows the gate to be removed by lifting it. Refer to the video below from 1:43 to 2:19 for a visual guide on pressure-fit installation.

1. Attach the pressure cups to the gate's adjustable screws.
2. Position the gate in the opening.
3. Adjust the screws to apply pressure against the walls until the gate is firmly secured. Ensure the gate is stable and cannot be pushed over.
4. For removal, loosen the pressure screws and lift the gate.

Image 5: Pressure-fit installation diagram.

5. Инструкция по эксплуатации

The Badabulle Deco Pop gate features an ergonomic handle for easy operation.

5.1. Opening the Gate (Screw-Mounted)

When screw-mounted, the gate functions like a door. Use the ergonomic handle to unlatch and swing the gate open in either direction. Ensure the gate latches securely when closed. Refer to the video in Section 4.3 from 0:00 to 0:09 for a demonstration.

5.2. Opening the Gate (Pressure-Fit)

When pressure-fit, the gate is designed to be lifted and removed from the opening. To pass through, lift the gate from its position. To re-secure, place it back into the opening and ensure it is stable. Refer to the video in Section 4.4 from 0:09 to 0:21 for a demonstration.

Image 6: Gate opening and closing mechanisms.

6. Техническое обслуживание

• Clean the gate regularly with a damp Используйте ткань и мягкое мыло. Избегайте абразивных чистящих средств.
• Periodically check all screws, bolts, and locking mechanisms to ensure they are tight and functioning correctly.
• Inspect the wooden components for any splinters, cracks, or damage.
• Do not paint or modify the gate, as this may compromise its safety features.

7. Поиск Неисправностей

• Gate does not fit opening: Ensure the opening is within the 63 cm to 106 cm range. Adjust the gate's extension mechanism as needed.
• Gate feels unstable: For pressure-fit installation, tighten the pressure screws evenly until the gate is firm. For screw-mounted, ensure all screws are securely fastened to the wall.
• Gate difficult to open/close: Check for any obstructions. Ensure the locking mechanism is clean and free of debris. If screw-mounted, verify the hinges are properly aligned.
• Недостающие части: См. компоненты выше.view (Image 3) and contact customer support if any parts are missing.

8. Технические характеристики

Image 7: Gate dimensions.

9. Гарантия и поддержка

Для получения информации о гарантии или технической поддержке обратитесь к официальному сайту производителя. webили обратитесь в службу поддержки клиентов. Сохраните чек на случай предъявления гарантийных претензий.

Производитель: Babymoov