Введение
This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.
Информация по безопасности
ПРЕДУПРЕЖДЕНИЕ: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.
- Перед установкой или обслуживанием данного устройства всегда отключайте питание от автоматического выключателя или блока предохранителей.
- Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
- Не превышайте указанные электрические характеристики устройства.
- This product is designed for use with NEMA L14-30P compatible plugs only.
- Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.
Содержимое упаковки
- 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
- Монтажные винты
Технические характеристики
| Спецификация | Ценить |
|---|---|
| Ampярость | 30 Amps |
| Томtage | 125/250 В переменного тока |
| Конфигурация NEMA | Л14-30П |
| Столбы / Провода | 3-полюсный, 4-проводной заземление |
| Максимальная нагрузка | 7500 Вт |
| Рекомендуемый калибр провода | 10 AWG/4C |
| Материал | Поливинилхлорид (ПВХ) |
| Сертификаты | ETL Listed (Conforms to UL & CSA standards) |
| Требуемый размер отверстия | 2.5 дюймов |
Настройка и установка
Необходимые инструменты: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.
- Подготовка места для установки: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
- Соединения проводки:
Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.
Изображение: сзади view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).
Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.
- Green (G): Провод заземления.
- Белый (клавиша W): Нейтральный провод.
- Black (X): Hot wire (Line 1).
- Red (Y): Hot wire (Line 2).
- Установите розетку: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
- Восстановить мощность: После завершения установки и проверки всех соединений восстановите подачу питания на автоматический выключатель.
Изображение: Спереди view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.
Инструкция по эксплуатации
- Opening the Cap: Lift the weatherproof cap to access the receptacle.
- Подключение вилки: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
- Отключение вилки: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
- Closing the Cap: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
Изображение: Спереди view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.
Обслуживание
Регулярное техническое обслуживание обеспечивает оптимальную производительность и безопасность.
- Уборка: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
- Инспекция: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
- Проверка связи: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.
Поиск неисправностей
- Нет питания:
- Check the circuit breaker or fuse for the circuit. Reset if tripped.
- Убедитесь, что источник питания активен.
- Убедитесь, что вилка полностью вставлена и зафиксирована в розетке.
- Ослабленное соединение:
- If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
- Inspect the plug on the appliance for damage.
- Damage to Outlet:
- If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.
Если предложенные способы устранения неполадок не помогут решить проблему, обратитесь к квалифицированному электрику.
Гарантия и поддержка
Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak webсайт.
