VEVOR DL405

Инструкция по эксплуатации магнитного торпедного нивелира VEVOR DL405

Модель: DL405

1. Продукт закончилсяview

The VEVOR Magnetic Torpedo Level, Model DL405, is a versatile measuring tool designed for precision in various applications, including plumbing and woodworking. It features a durable aluminum alloy construction, a high-definition LED backlit screen, and a gravity sensor for automatic screen rotation.

Основные характеристики:

  • High-Definition LCD Backlight Digital Screen: Provides clear measurement data even in low-light conditions.
  • Датчик гравитации: Automatically rotates the screen for convenient viewing when the device is flipped. Includes an audible beep for vertical and horizontal positions.
  • Sturdy & Durable Aluminum Construction: Made from high-quality, rust-resistant, and wear-resistant aluminum for long-lasting use.
  • 0-360 Degree Measurement: Offers a full range of measurement (4x90 degrees) with 0.05-degree precision for accurate horizontal and vertical positioning.
  • Memory Recording & Holding Function: Stores the last 8 angle measurements and allows transfer of target values to other work areas.
  • Сильная магнитная адсорбция: Integrated magnets for easy attachment to metal surfaces.
VEVOR Magnetic Torpedo Level DL405 with carrying bag
Figure 1: VEVOR Magnetic Torpedo Level DL405 with its protective carrying bag.

The VEVOR Magnetic Torpedo Level DL405 is presented with its protective carrying bag, highlighting its portability and readiness for various job sites.

24-inch high-precision digital level with features
Рисунок 2: Болееview of the 24-inch high-precision digital level, emphasizing its premium aluminum construction, high accuracy, gravity sensing, and strong magnetic adsorption.

This image illustrates the core benefits of the VEVOR DL405, showcasing its robust build and advanced features for precise leveling tasks.

2. Настройка

Установка аккумулятора:

The VEVOR DL405 requires batteries for operation. Ensure correct polarity during installation.

  1. Locate the battery compartment cover on the underside of the level.
  2. Use a screwdriver to loosen the screw and remove the battery cover.
  3. Insert two batteries, ensuring the proper positive (+) and negative (-) polarities are aligned.
  4. Установите крышку батарейного отсека на место и надежно затяните винт.

Примечание: When the low battery icon appears on the display, it indicates that the battery is low and should be replaced.

Video 1: Detailed instructions on how to install and replace batteries for a digital level. This video also covers other functions and calibration.

This video provides a comprehensive guide on battery installation and other operational aspects of a similar digital level, which can be applied to the VEVOR DL405.

3. Инструкция по эксплуатации

Включение/выключение питания:

  • To turn on, short press the ВКЛ/ВЫКЛ button. A brief buzzer sound will confirm activation.
  • Чтобы выключить, нажмите и удерживайте кнопку. ВКЛ/ВЫКЛ кнопку примерно на 3 секунды.

Переключение единиц измерения:

  • Короткое нажатие РЕЖИМ button to cycle through available measurement units: degrees (°), percent (%), mm/m, in/ft (fraction), and in/ft (decimal).

Reference Measurement Mode:

  • Короткое нажатие РЕФ button to enter or exit the reference measurement mode.
  • When in reference mode, the 'S' icon will flash on the display, and the current position will be set as 0 degrees. All subsequent measurements will be relative to this set position.

Функция удержания:

  • Короткое нажатие ДЕРЖАТЬ button to freeze the current measurement value on the display. The 'H' icon will be displayed.
  • Нажмите ДЕРЖАТЬ button again to exit the hold function and resume live measurements.

Звуковой сигнал:

  • Short press the buzzer button (often integrated with ON/OFF or a dedicated button) to turn the audible buzzer on or off. When active, a buzzer icon will appear on the display.
  • The buzzer provides a continuous beep at 0° and 90° for precise alignment. A fast beep indicates angles between 0°-1° or 89°-90°.
VEVOR Magnetic Torpedo Level DL405 with LCD display showing 15.6% and gravity sensor feature
Figure 3: The high-definition LCD display shows a 15.6% slope, demonstrating the gravity sensor's ability to automatically rotate the screen for easy reading.

This image highlights the clear LCD display and the automatic screen rotation feature, which enhances usability in various orientations.

VEVOR Magnetic Torpedo Level DL405 demonstrating 4x90-degree multi-directional measurement
Figure 4: The level is shown measuring angles in multiple directions, illustrating its 0-360 degree range and 0.05-degree accuracy for horizontal and vertical measurements.

This visual demonstrates the level's capability for comprehensive angle measurement, crucial for diverse construction and DIY projects.

Close-up of dual-axis precise bubble vials on VEVOR Magnetic Torpedo Level DL405
Рисунок 5: Подробный view of the vertical and horizontal bubble vials, indicating their precision of 0.0005 inches/foot (0.5mm/M).

The image emphasizes the traditional bubble vials, providing a clear visual reference for leveling alongside the digital display.

Video 2: This video demonstrates the basic functions of a digital torpedo level, including power on/off, unit switching, relative angle measurement, magnetic base, and display features.

This video provides a visual guide to the core functionalities of a digital level, offering practical insights into its use for various tasks.

4. Калибровка

If you notice a significant deviation in accuracy, calibrate the level using the following steps:

  1. Turn off the digital level.
  2. Place the level on a flat and smooth surface.
  3. Когда устройство выключено, нажмите и удерживайте ДЕРЖАТЬ кнопка.
  4. Пока все еще держится ДЕРЖАТЬ, нажмите кнопку ВКЛ/ВЫКЛ button until the LCD display shows "CAL".
  5. The screen will then display the current measured angle. Keep the level still for a short period, then press the ДЕРЖАТЬ button. "CAL1" will briefly display.
  6. In the same location, rotate the level 180 degrees.
  7. Нажмите ДЕРЖАТЬ button again. "CAL2" will briefly display.
  8. Once "CAL2" disappears, the calibration is complete.

Примечание: To cancel calibration at any point, turn off the digital level.

5. Техническое обслуживание

Общий уход:

  • Держите устройство чистым и сухим. Протирайте мягкой тканью.amp ткань.
  • Avoid exposing the level to extreme temperatures or direct sunlight for prolonged periods.
  • Store the level in its provided carrying bag when not in use to protect it from dust and damage.

Замена батареи:

Refer to the "Setup" section for detailed instructions on battery installation and replacement. It is recommended to remove batteries for long-term storage to prevent leakage.

VEVOR Magnetic Torpedo Level DL405 showing IP54 protection against splashes and rain
Figure 6: The level is shown in a rainy environment, illustrating its IP54 rating for dust-proof, waterproof, and weather-resistant protection.

This image demonstrates the level's durability and resistance to environmental factors, emphasizing its suitability for outdoor use.

6. Поиск Неисправностей

  • Дисплей не включается: Проверьте установку батарей и убедитесь, что они не разряжены. При необходимости замените.
  • Неточные показания: Perform a calibration as described in the "Calibration" section. Ensure the surface is stable and free from vibrations.
  • "ERR" message on display: This may occur if the level is lying flat at approximately 30 degrees. Adjust the level to a different angle or re-calibrate if the error persists.
  • Звуковой сигнал не работает: Check if the buzzer function is enabled (refer to "Buzzer Prompt" in Operating Instructions).

7. Технические характеристики

ОсобенностьСпецификация
Номер модели товараDL405
МатериалАлюминий
Длина элемента24 дюйма / 600 мм
Диапазон измерения0-360 degrees (4x90°)
Количество пузырьков2
Цвет пузырька уровняЗеленый
Точность пузырькового уровня0° и 90°: ±0.1°; Другие углы: ±0.2°
Разрешение0.05°
Сумка для храненияТкань 600D
РучкаАБС + ТПЭ
Вес нетто1.11 фунта / 505 г
Размеры продукта59.94 х 2.79 х 0.25 см
СКП840349935614
VEVOR Magnetic Torpedo Level DL405 detailed specifications and dimensions
Figure 7: A visual representation of the VEVOR DL405's key specifications and dimensions, including item model number, material, length, measurement range, and accuracy.

This image provides a quick reference for the physical and technical attributes of the level.

8. Гарантия и поддержка

Для получения информации о гарантии, технической поддержке или по вопросам обслуживания обращайтесь в службу поддержки клиентов VEVOR через их официального представителя. website or the retailer where the product was purchased. Keep your purchase receipt and product model number (DL405) handy for faster assistance.

Связанные документы - DL405

Предварительноview Инструкция по сборке проекционного экрана VEVOR с фиксированной рамой
Detailed assembly instructions for VEVOR fixed frame projection screens, including parts list, required tools, and step-by-step installation procedures for a perfect setup. This guide covers unpacking, frame assembly, screen material attachment, and wall mounting.
Предварительноview Защитный уголок для стены VEVOR — серия BXGHJ/LHJHJ | Прочная нержавеющая сталь и алюминий
Защитите и украсьте свои стены с помощью высококачественных защитных уголков VEVOR. Изготовлены из прочной нержавеющей стали 304 и алюминия, доступны в различных размерах для простой установки. Идеально подходят для домов, офисов и коммерческих помещений.
Предварительноview Инструкция по эксплуатации и сборка лестничной тележки VEVOR 2243B
Полное руководство пользователя и инструкция по сборке лестничной тележки VEVOR 2243B. Включает инструкции по технике безопасности, параметры модели, список компонентов, пошаговую сборку, рекомендации по устранению неполадок и советы по техническому обслуживанию.
Предварительноview Инструкция по установке слота для карты питания теплицы VEVOR — модели LD6-LD10
Подробное руководство по установке слотов для карт питания теплиц VEVOR моделей LD6, LD7, LD8, LD9 и LD10. Включает в себя подробную информацию о продукте, параметры, списки компонентов и пошаговые инструкции по сборке.
Предварительноview Руководство по установке пружинной проволоки и замкового канала для теплиц VEVOR YMCT-2011
Руководство по установке пружинной проволоки и замкового канала для теплиц VEVOR (модель: YMCT-2011). Подробное описание компонентов, технических характеристик и этапов сборки этого аксессуара для теплиц из алюминиевого сплава.
Предварительноview Пузырьковый уровень VEVOR: SP-N4, SP-C4, SP-N6, SP-C6. Руководство пользователя и технические характеристики.
Полное руководство пользователя и технические характеристики пузырьковых уровней VEVOR, включая модели SP-N4, SP-C4, SP-N6 и SP-C6. Узнайте об использовании продукта, параметрах, инструкциях и техническом обслуживании.