Руководства+

Firecore F94T-XG

Firecore F94T-XG 3 X 360 Laser Level and FT1500D Tripod User Manual

Model: F94T-XG Laser Level & FT1500D Tripod

1. Введение

Thank you for choosing the Firecore F94T-XG 3 X 360 Laser Level and FT1500D Tripod. This comprehensive system provides an all-in-one leveling and alignment solution for various applications. The F94T-XG laser level projects three 360° green laser planes, offering superior visibility and precision for tasks such as aligning, leveling, plumbing, and squaring. Paired with the adjustable FT1500D aluminum alloy tripod, this kit ensures stable and accurate measurements for both interior and exterior projects. Please read this manual thoroughly before operation to ensure safe and effective use of your new tool.

2. Информация по технике безопасности

WARNING: Read and understand all safety warnings and instructions before operating this laser level. Failure to follow the warnings and instructions may result in serious injury.

2.1 Безопасность лазера

This product is a Class II laser product, with a power output of less than 1mW and a wavelength of 505-520nm. Direct eye exposure to the laser beam should be avoided.

2.2 Общая безопасность

3. Содержимое упаковки

The Firecore F94T-XG Laser Level and FT1500D Tripod kit includes the following items:

All components of the Firecore F94T-XG laser level kit laid out, including the laser level, two rechargeable batteries, a charger, a magnetic pivoting base, a green target plate, a user manual, and a carrying case.
Figure 3.1: Contents of the Firecore F94T-XG Laser Level Kit.

4. Продукт закончилсяview

4.1 Firecore F94T-XG Laser Level

The F94T-XG is a robust and precise laser level designed for demanding job sites. It features an over-molded housing and IP65 water/dust resistance for durability.

Крупный план view of the Firecore F94T-XG laser level, highlighting its IP65 rating, accuracy of +/- 1/9 inch at 33 feet, and a range of up to 165 feet with a detector.
Figure 4.1: Firecore F94T-XG Laser Level Key Features.

4.2 Firecore FT1500D Laser Tripod

The FT1500D tripod provides a stable and adjustable platform for your laser level, suitable for various applications.

Полный view of the Firecore FT1500D aluminum alloy laser tripod, showing its three-section adjustable legs and central column.
Figure 4.2: Firecore FT1500D Laser Tripod.

5. Настройка

5.1 Установка и зарядка аккумулятора

The F94T-XG uses two 7.4V / 2600mAh rechargeable Li-ion batteries.

  1. Откройте крышку батарейного отсека на задней панели лазерного нивелира.
  2. Insert the rechargeable Li-ion battery packs, ensuring correct polarity.
  3. Плотно закройте крышку батарейного отсека.
  4. To charge, connect the Type-C charging cable to the battery pack (if charging separately) or directly to the laser level. Connect the power adapter to a suitable power outlet. The charging indicator will show charging status.

5.2 Attaching Laser Level to Tripod

The FT1500D tripod features both 1/4-inch and 5/8-inch mounting threads for compatibility.

Close-up of the Firecore FT1500D tripod head, showing both the 1/4-inch and 5/8-inch threaded studs for mounting laser levels.
Figure 5.1: Tripod Head with 1/4" and 5/8" Threads.
  1. Extend the tripod legs and central column to your desired height. Use the quick-release clamps, чтобы обезопасить их.
  2. Place the F94T-XG laser level onto the tripod head. The laser level's base has a 1/4-inch thread.
  3. Secure the laser level by rotating the mounting screw on the tripod head until it is firmly attached.

6. Инструкция по эксплуатации

6.1 Powering On and Self-Leveling Mode

The F94T-XG features a Smart Pendulum System for automatic leveling.

The Firecore F94T-XG laser level mounted on its tripod, projecting three 360-degree green laser lines (one horizontal, two vertical) in a room setting.
Figure 6.1: Firecore F94T-XG Laser Level in Self-Leveling Mode.
  1. Unlock the pendulum by sliding the pendulum lock switch to the unlocked position.
  2. Press the power button to turn on the laser level. The laser lines will activate.
  3. Place the laser level on a stable surface or tripod. The Smart Pendulum System will automatically self-level within ±4°.
  4. If the device is out of its self-leveling range, the laser lines will flash rapidly to indicate an out-of-level condition. Adjust the position of the laser level until the lines stop flashing and become steady.

6.2 Manual Mode (Locking Lines)

For applications requiring lines at an angle, you can lock the pendulum.

  1. With the pendulum lock switch in the locked position, press and hold the power button for a few seconds to activate Manual Mode.
  2. The laser lines will turn on and remain steady, allowing you to project lines at any desired angle. The out-of-level alarm will be deactivated in this mode.

6.3 Pulse Mode (Detector Use)

Pulse mode extends the working range of the laser level, especially in bright lighting or outdoor conditions, when used with a compatible laser detector (e.g., Firecore FD30).

A person wearing safety glasses using a Firecore FD30 laser detector to locate the green laser line projected by the F94T-XG laser level on a wall, demonstrating extended range capability.
Figure 6.2: Using the Laser Level with a Detector in Pulse Mode.
  1. In self-leveling mode, press the dedicated Pulse Mode button (if available, or cycle through modes) to activate Pulse Mode. The laser lines may appear dimmer to the naked eye but will be detectable by the receiver.
  2. Follow the instructions for your specific laser detector to locate the laser line at extended distances.

6.4 Приложения

The Firecore F94T-XG is versatile for various professional and DIY applications.

The Firecore F94T-XG laser level projecting multiple green laser lines across a large, unfinished room with concrete floors and exposed studs, demonstrating its 360-degree coverage for construction and layout tasks.
Figure 6.3: Laser Level in a Construction Environment.

7. Техническое обслуживание

7.1 Очистка

7.2 Хранение

The Firecore FT1500D tripod folded and placed next to its black carrying bag, indicating easy storage and transport.
Figure 7.1: Tripod and Carrying Bag for Storage.

7.3 Уход за аккумулятором

8. Поиск Неисправностей

If you encounter issues with your Firecore F94T-XG laser level, refer to the table below for common problems and solutions.

ПроблемаВозможная причинаРешение
Лазерные лучи быстро вспыхивают.Laser level is out of its self-leveling range (±4°).Place the laser level on a more level surface or adjust the tripod until the lines become steady.
Лазерные линии на открытом воздухе тусклые или не видны.Bright ambient light; not in Pulse Mode.Activate Pulse Mode and use a compatible laser detector (e.g., Firecore FD30). Use the green target plate to enhance visibility over short distances.
Laser level does not turn on.Low battery; pendulum locked; power button not pressed correctly.Charge or replace batteries. Ensure pendulum lock switch is in the unlocked position. Press the power button firmly.
Неточные измерения.Device not calibrated; pendulum not fully settled; disturbance during operation.Ensure the device is on a stable surface and has fully self-leveled. Avoid disturbing the device during use. If persistent, contact customer support for calibration.
Срок службы батареи меньше ожидаемого.Batteries not fully charged; old batteries; operating in extreme temperatures.Ensure batteries are fully charged. Replace old batteries if capacity has significantly degraded. Operate within recommended temperature ranges.

9. Технические характеристики

ОсобенностьСпецификация
Класс лазераClass II (IEC/EN60825-1/2014)
Длина волны лазера505-520nm (Green Laser)
Точность выравнивания±1/9 inch at 33 ft (±3mm at 10m)
Диапазон самовыравнивания±4°
Время самовыравнивания3 секунд
Видимый диапазонДо 82 футов (25 м)
Working Range with DetectorUp to 197 ft (60m) with Firecore FD30
Рейтинг IPСтепень защиты IP65 (водо- и пылезащита)
Источник питания2 x 7.4V / 2600mAh Li-ion Batteries
Время работыApprox. 10 hours per battery (continuous use)
Монтажная резьба1/4 дюйма и 5/8 дюйма.
Материал штативаАлюминиевый сплав
Диапазон высот штативаОт 20 дюйма до 60 дюймов (от 50 см до 150 см)
Рабочая температураNot specified, generally 14°F to 122°F (-10°C to 50°C) for laser levels.
Температура храненияNot specified, generally -4°F to 158°F (-20°C to 70°C).

10. Гарантия и поддержка

Firecore products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Firecore website. If you have any questions, require technical assistance, or need to report an issue, please contact Firecore customer support through the following channels:

Please have your model number (F94T-XG) and purchase date ready when contacting support.