1. Введение
This manual provides detailed instructions for the assembly, operation, and maintenance of your Montech AIR 903 Base Midi-Tower computer case. Designed for optimal airflow and compatibility with a wide range of components, this case offers a robust foundation for your PC build.
Figure 1: Montech AIR 903 Base Midi-Tower
2. Настройка
2.1 Размеры и совместимость
The Montech AIR 903 Base Midi-Tower measures approximately 18.82 x 9.05 x 19.41 inches (465mm x 232mm x 492mm). It supports Mini-ITX, ATX, and Extended ATX (E-ATX) motherboards. Please note that using E-ATX motherboards may cover some rubberized cable holes.
Рисунок 2: Размеры корпуса
2.2 Установка компонентов
Данный случай предлагает ample space for various components:
- Клиренс графического процессора: Supports graphics cards up to 400mm in length, accommodating high-end models like the RTX 4090.
- Высота процессорного кулера: Подходит для процессорных кулеров высотой до 180 мм.
- Блок питания: A dedicated compartment at the rear supports power supplies up to 220mm in length without interfering with cables. This compartment can be extended by removing the hard drive cage.
- Отсеки для дисков: The case includes one 3.5-inch drive bay (inside the removable cage) and five 2.5-inch drive spots (two behind the motherboard, two next to it, and one on top of the 3.5-inch cage). Note that the 2.5-inch spots are shared.
Рисунок 3: Внутренняя планировка
2.3 Управление кабелями
The Montech AIR 903 Base features well-planned cable routing options, including rubberized cable holes and pre-attached Montech straps behind the motherboard tray. This allows for a clean and organized build, improving airflow and aesthetics.
2.4 Панель ввода / вывода
Верхняя панель ввода/вывода обеспечивает удобный доступ к основным портам и элементам управления:
- 2 порта USB 3.0 Type-A
- 1 порт USB Type-C
- Audio In/Out jacks
- Кнопка питания
- Кнопка сброса
- LED button (for ARGB control)
Рисунок 4: Верхняя панель ввода/вывода
3. Операционная
3.1 Воздушный поток и охлаждение
The AIR 903 Base is designed for excellent airflow, featuring an innovative mesh front panel with a high ventilation rate. This design ensures optimal cooling performance for your components.
Figure 5: Mesh Front Panel
The case comes pre-installed with 140mm PWM fans (quantity may vary by specific model, Base typically includes 3). It supports additional fans and radiators:
- Передний: Up to 3 x 140mm or 3 x 120mm fans. Radiator support up to 360mm or 280mm.
- Вершина: Up to 2 x 140mm or 3 x 120mm fans. Radiator support up to 360mm or 280mm.
- Задний: 1 x 120mm or 1 x 140mm fan.
- Нижний: 2 x 120mm fans (requires removing the hard drive cage).
Figure 6: Top Panel Mesh
3.2 Управление ARGB-подсветкой
If your case model includes ARGB fans, they are connected to a pre-installed ARGB controller and fan hub located behind the motherboard tray. The LED button on the top I/O panel allows you to cycle through various lighting modes. For advanced control, connect the 3-pin ARGB and PWM cables from the hub to your motherboard (if supported) to manage lighting and fan speeds via software.
4. Техническое обслуживание
4.1 Очистка пылевых фильтров
The front mesh panel can be easily removed by pulling it from the bottom, providing convenient access for cleaning the front fans and mesh. The top panel also features a magnetic dust filter for easy removal and cleaning. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside your system.
5. Поиск Неисправностей
5.1 Fans or ARGB Not Functioning
Ensure all fan and ARGB cables are securely connected to the pre-installed hub and that the hub itself is connected to SATA power and the appropriate headers on your motherboard (if using software control). Check your motherboard's BIOS/UEFI settings for fan control options.
5.2 Front Panel Not Sitting Flush
Inspect the front mesh panel for any physical damage or dents that might prevent it from sitting flush. Ensure all clips are intact and properly aligned when reattaching the panel.
5.3 Проблемы с подгонкой компонентов
Refer to the specifications section for maximum component dimensions. If installing a large PSU, consider removing the hard drive cage to provide more clearance. For large CPU coolers, ensure RAM clearance is sufficient; some coolers allow for fan elevation to clear tall RAM modules.
6. Технические характеристики
| Особенность | Спецификация |
|---|---|
| Бренд | Монтеч |
| Название модели | AIR 903 BASE |
| Номер модели товара | AIR903BASEB |
| Тип корпуса | Средняя башня |
| Совместимость с материнской платой | Расширенный ATX, ATX, Micro-ATX, Mini-ITX |
| Размеры изделия (ДхШхВ) | 18.82 x 9.05 x 19.41 дюйма |
| Вес товара | 19.62 фунта |
| Цвет | Черный |
| Материал | Закаленное стекло |
| Количество портов USB 3.0 | 2 |
| Количество портов USB 2.0 | 2 |
| Метод охлаждения | Воздух, вода |
| Размер вентилятора | 140 миллиметра |
| Тип крепления блока питания | Заднее крепление |
7. Гарантия и поддержка
For warranty information and technical support, please visit the official Montech webна сайте или обратитесь к местному продавцу. Сохраните чек о покупке для предъявления гарантийных претензий.
8 Важная информация по безопасности
Always disconnect power before installing or servicing components. Handle tempered glass panels with care to prevent breakage. Avoid exposing the case to extreme temperatures or humidity. Keep out of reach of children.
