Введение
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ATDEC ORA Monitor ARM, Model AW-ORA-F-S. This monitor arm is designed to free up desk space and improve ergonomic comfort by allowing precise adjustment of your monitor's position. It supports monitors up to 35 inches, both flat and curved, with a weight range of 4.4 to 17.6 lbs (2 to 8 kg).
Please read these instructions carefully before installation and retain this manual for future reference.
Инструкции по установке
Follow these steps to correctly install your ATDEC ORA Monitor ARM.
1. Распаковка и проверка комплектующих.
Carefully remove all components from the packaging. Verify that all parts are present according to the packing list (not provided in this document, refer to your product packaging). If any parts are missing or damaged, do not proceed with installation and contact customer support.
2. Стол Clamp Установка
The ORA Monitor ARM typically uses a desk clamp for secure attachment to your workstation.
- Расположите стол clamp base on the edge of your desk.
- Затяните крепление.amp screw until the arm is firmly secured to the desk. Ensure the clamp Он устойчив и не шатается.
Image: ATDEC ORA Monitor Arms with VESA plates and desk clamps. This image illustrates the different color options and the VESA mounting plate, which attaches to the back of your monitor, and the desk clamp that secures the arm to the desk.
3. Крепление монитора
The ORA Monitor ARM uses a VESA mounting plate to attach to your monitor.
- Locate the VESA mounting holes on the back of your monitor. These are typically 75x75mm or 100x100mm apart.
- Attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor with the attached VESA plate and slide it onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism present on the arm.
Image: Monitors mounted on ATDEC ORA arms in an office. This image demonstrates the monitor arm in use, showing two monitors attached to the arms and positioned on a desk, highlighting the space-saving and ergonomic benefits.
4. Организация кабелей.
Route your monitor cables (power, video, etc.) through the integrated cable management channels or clips on the monitor arm. This helps maintain a tidy workspace and prevents cable damage.
Инструкция по эксплуатации
The ATDEC ORA Monitor ARM offers various adjustment capabilities for optimal viewУтешение.
- Регулировка высоты: Gently push or pull the monitor up or down to achieve the desired height. The gas spring mechanism will hold it in place.
- Регулировка наклона: Tilt the monitor screen up or down to reduce glare and find your preferred viewугол наклона.
- Регулировка поворота: Rotate the monitor left or right to share your screen with others or adjust your viewпозиция.
- Поворот (портрет/альбом): Поверните монитор на 90 градусов, чтобы переключиться между альбомной и книжной ориентацией.
- Регулировка натяжения: If the arm is too stiff or too loose for your monitor's weight, use the included Allen key to adjust the tension screw on the arm. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the monitor stays in position when released.
Обслуживание
Регулярное техническое обслуживание обеспечивает долговечность и оптимальную работу кронштейна монитора.
- Уборка: Протрите поверхности рычагов мягкой тряпкой.amp Ткань. Избегайте использования абразивных чистящих средств и растворителей.
- Периодические проверки: Периодически проверяйте затяжку всех винтов и соединений. При необходимости подтяните.
- Напряжение: Re-adjust the tension if your monitor's weight changes or if the arm no longer holds its position correctly.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Monitor arm sags or drifts down. | Tension is too low for the monitor's weight. | Increase the gas spring tension using the Allen key (turn clockwise). |
| Monitor arm is difficult to move up or down. | Tension is too high for the monitor's weight. | Decrease the gas spring tension using the Allen key (turn counter-clockwise). |
| Monitor wobbles or is unstable. | Стол clamp or VESA plate screws are loose. | Убедитесь, что стол чистыйamp is securely tightened. Check and tighten all VESA mounting screws on the monitor. |
| Cables are tangled or messy. | Неправильная прокладка кабелей. | Re-route cables through the integrated cable management channels or clips on the arm. |
Технические характеристики
- Номер модели: АВ-ОРА-ФС
- Бренд: АТДЕК
- Совместимые устройства: Монитор
- Тип крепления: Настольный Clamp
- Тип движения: Tilt, Swivel, Rotation, Height Adjustment (Gas Spring)
- Поддерживаемый размер монитора: Up to 35 inches (Flat & Curved)
- Supported Monitor Weight: От 4.4 до 17.6 фунта (от 2 до 8 кг)
- Вес товара: 8.58 фунта (приблизительно 3.89 кг)
- Размеры упаковки: 22.44 x 7.09 x 5.31 дюйма (прибл. 57 x 18 x 13.5 см)
- СКП: 881493020214
- ASIN: B0C8ZPWLR5
- Производитель: Atdec Pty Ltd
- Дата первой доступности: 22 июня 2023 г.
Гарантия и поддержка
For warranty information, technical support, or to purchase replacement parts, please refer to the official ATDEC webили обратитесь в службу поддержки клиентов. Сохраните чек в качестве подтверждения покупки.
ATDEC Official Webсайт: www.atdec.com
