Введение
Thank you for choosing the KEPLUG 8.7-inch Wired Motion Sensor LED Ceiling Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. This product features a built-in motion and light sensor, adjustable color temperature, and multiple operating modes, designed for various indoor applications.
Image: Two KEPLUG 8.7-inch wired motion sensor LED ceiling lights, showcasing their round, flush-mount design and integrated sensor modules.
Настройка и установка
This KEPLUG LED ceiling light is designed for hardwired installation on either ceilings or walls. Please ensure the power supply is turned off at the circuit breaker before beginning installation. It is recommended that installation be performed by a qualified electrician.
Предварительные шаги по установке:
- Выберите цветовую температуру: Before mounting, locate the color temperature switch on the back of the light fixture. Slide the switch to select your desired color temperature: 3000K (Warm White), 4000K (Natural White), or 6000K (Cool White). This setting cannot be changed after installation without removing the fixture.
- Соберите инструменты: Ensure you have the necessary tools, including a screwdriver, wire strippers, and electrical tape.
Этапы установки:
- Установите монтажный кронштейн: Secure the provided mounting bracket to the ceiling or wall junction box using the screws and anchors. Ensure the bracket is firmly attached and level.
- Подключение проводки: Connect the household electrical wires to the corresponding wires on the light fixture using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- Прикрепить осветительный прибор: Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place. Ensure the fixture is flush against the mounting surface.
- Восстановить мощность: После надежной установки прибора восстановите подачу питания на автоматический выключатель.
Image: Illustration showing the mounting bracket being secured to the ceiling with screws and anchors.
Image: Hands demonstrating the easy lock installation method, showing the light fixture being twisted onto the mounting bracket.
Инструкция по эксплуатации
Your KEPLUG motion sensor LED ceiling light offers adjustable settings for optimal performance.
Режимы работы:
The light fixture features a slide switch on the side to select between three operating modes:
- Режим включения: The light functions as a standard ceiling lamp, remaining continuously on. It can be controlled via your wall switch. Motion sensing is disabled in this mode.
- ВЫКЛ. Режим: Свет выключен.
- Автоматический режим: This mode activates the motion and light sensors. The light will turn on automatically when motion is detected in low ambient light conditions.
Image: Visual representation of the three operating modes (ON, OFF, AUTO) and how they affect the light's behavior based on ambient light and motion.
Motion Sensor Functionality (AUTO Mode):
In AUTO mode, the built-in microwave motion sensor detects movement within a 120-degree angle and a range of 9-18 feet. The light will activate when motion is detected and the ambient light is low. After motion ceases, the light will remain on for a set duration before automatically turning off.
Регулируемые настройки таймера:
The light offers three adjustable timer settings for how long it remains on after motion is no longer detected:
- 30 секунд
- 120 секунд
- 180 секунд
To adjust the timer, locate the small slide switch next to the motion sensor on the light fixture and select your preferred duration.
Image: Illustration detailing the motion sensor's detection angle and range, along with the switch for selecting the 30s, 120s, or 180s auto-off timer.
Выбор цветовой температуры:
As mentioned in the setup, the color temperature (3000K Warm White, 4000K Natural White, 6000K Cool White) is selected via a switch on the back of the fixture prior to installation.
Image: A visual comparison of the three selectable color temperatures: 3000K Warm White, 4000K Natural White, and 6000K Cool White, as emitted by the light fixture.
Обслуживание
To ensure the longevity and optimal performance of your KEPLUG LED ceiling light, follow these simple maintenance guidelines:
- Уборка: Disconnect power to the fixture before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Инспекция: Периодически осматривайте светильник на наличие повреждений или ослабленных соединений. При обнаружении каких-либо проблем обратитесь к квалифицированному электрику.
- Замена лампы: This fixture uses integrated LED technology, meaning the LED bulbs are not user-replaceable. The LEDs are designed for a long lifespan (over 30,000 hours).
Поиск неисправностей
If you encounter issues with your KEPLUG motion sensor LED ceiling light, refer to the following common problems and solutions:
| Проблема | Возможная причина | Решение |
|---|---|---|
| Свет не включается. | Нет электропитания. Выбран неправильный режим. Sufficient ambient light (in AUTO mode). | Проверьте автоматический выключатель и настенный выключатель. Ensure the mode switch is set to 'ON' or 'AUTO'. In 'AUTO' mode, the light will only activate in low light conditions. Test in a darker environment. |
| Датчик движения не обнаруживает движение. | Light is not in 'AUTO' mode. Препятствие в зоне обнаружения. Окружающий свет слишком высокий. Motion is outside detection range/angle. | Ensure the mode switch is set to 'AUTO'. Уберите все предметы, блокирующие датчик. view. The sensor is designed to activate in low light. If the area is bright, it will not turn on. Ensure motion occurs within the 9-18 feet range and 120-degree angle. |
| Свет гаснет слишком быстро или горит слишком долго. | Неправильная настройка таймера. | Adjust the timer switch on the fixture to 30s, 120s, or 180s as desired. |
| Difficulty with mounting. | Mounting surface is not flat. | Ensure the ceiling or wall surface is perfectly flat for proper alignment and secure attachment of the fixture. |
Технические характеристики продукта
| Особенность | Деталь |
|---|---|
| Бренд | КЕПЛУГ |
| Название модели | motion sensor ceiling light |
| Размеры продукта | 8.66"L x 8.66"W x 1.11"H (22cm diameter, 2.5cm thickness) |
| Вес товара | 2.01 фунта (0.91 килограмма) |
| Ватtage | 18 Вт |
| Яркость | 1600 люмен |
| Цветовая температура | 3000K (Warm White), 4000K (Natural White), 6000K (Cool White) - Adjustable |
| Источник питания | AC (проводное подключение) |
| Томtage | 110 Вольт |
| Особые возможности | Adjustable Color Temperature, Energy Efficient, Motion Sensor, Timer, Water Resistant |
| Угол обнаружения датчика движения | 120 градусов |
| Диапазон обнаружения датчика движения | 9-18 футов (приблизительно 3-5 метра) |
| Тип установки | Для установки заподлицо |
| Материал | АБС-пластик |
| Использование внутри и снаружи помещений | В помещении |
| Продолжительность жизни | Более 30,000 часов |
| Включенные компоненты | Монтажное оборудование |
Image: Technical drawing illustrating the dimensions of the KEPLUG ceiling light, showing a diameter of 22cm and a thickness of 2.5cm.
Информация о гарантии
For detailed warranty information regarding your KEPLUG Motion Sensor LED Ceiling Light, please refer to the product packaging or contact KEPLUG customer support directly. Warranty terms and conditions may vary.
Поддержка клиентов
If you have any questions, require technical assistance, or need further support with your KEPLUG product, please contact KEPLUG customer service through the retailer's platform or the official KEPLUG webПри обращении в службу поддержки, пожалуйста, укажите номер модели вашего продукта и дату покупки.
