Введение
This manual provides detailed instructions for the proper setup, operation, and maintenance of your AMTAST WT0124 Wireless Pool Thermometer. Please read this guide thoroughly before using the device to ensure optimal performance and longevity.
The AMTAST WT0124 is designed to monitor water temperatures in various environments such as swimming pools, heated pools, wood-fired tubs, spas, aquariums, and ponds. It features a floating sensor and an indoor receiver for convenient temperature monitoring.
Информация по безопасности
- Во избежание повреждений храните устройство вдали от экстремальных температур и прямых солнечных лучей в течение длительного времени.
- Do not immerse the receiver unit in water. The floating sensor is waterproof, but the receiver is not.
- Use only the specified battery types and ensure correct polarity during installation.
- Утилизируйте старые батареи ответственно в соответствии с местными правилами.
- Не пытайтесь разбирать или ремонтировать устройство самостоятельно. Обратитесь в службу поддержки клиентов за помощью.
Содержимое упаковки
После распаковки, пожалуйста, убедитесь, что все предметы на месте и находятся в хорошем состоянии:
- 1 x AMTAST WT0124 Floating Pool Sensor (Transmitter)
- 1 x AMTAST WT0124 Indoor Receiver Unit
- 1 x Руководство по эксплуатации (этот документ)
Note: Batteries are not included in the package due to aviation security regulations. Please purchase 2 x AA 1.5V Alkaline batteries for the transmitter and 2 x AAA 1.5V Alkaline batteries for the receiver separately.
Продукт болееview
The AMTAST WT0124 Wireless Pool Thermometer consists of two main components: a floating sensor (transmitter) and an indoor receiver unit. The sensor measures water temperature and transmits it wirelessly to the receiver, which displays both indoor and outdoor temperatures, along with time and calendar functions.
Image: The AMTAST WT0124 Wireless Pool Thermometer showing the floating sensor and the indoor receiver unit.
Основные характеристики:
- Беспроводная передача: Monitors water temperature from up to 300 feet (100 meters) away using 433MHz RF technology.
- Solar Power Option: The floating sensor includes a solar panel for sustainable operation when using rechargeable batteries.
- Цифровой ЖК-дисплей: Easy-to-read display on the receiver unit shows indoor temperature, water temperature, time, and calendar.
- Многофункциональный: Includes snooze alarm and adjustable calendar features.
- Прочная конструкция: Made of ABS material for high stability and waterproof performance (sensor only).
Image: Visual representation of the multi-functional capabilities of the thermometer, highlighting solar power, indoor temperature, pool temperature, calendar, and alarm clock features.
Настраивать
1. Установка аккумулятора
Proper battery installation is crucial for the device's functionality. Please follow these steps carefully:
- For the Floating Sensor (Transmitter):
- Unscrew the top cap of the floating sensor.
- Insert 2 x AA 1.5V Alkaline batteries, observing the correct polarity (+/-).
- If using rechargeable batteries, ensure the solar function switch (if present) is turned ON. If using alkaline batteries, ensure the solar function switch is turned ВЫКЛЮЧЕННЫЙ to prevent battery damage.
- Securely re-attach the top cap, ensuring the waterproof seal is properly seated.
- For the Indoor Receiver Unit:
- Откройте крышку батарейного отсека на задней панели приемника.
- Insert 2 x AAA 1.5V Alkaline batteries, observing the correct polarity (+/-).
- Закройте крышку батарейного отсека.
Important: Always install the outdoor sensor battery first, followed by the indoor monitor battery. Incorrect order may prevent connection or display of readings.
2. Начальная синхронизация
After battery installation, the receiver unit will attempt to connect with the floating sensor. This process may take a few minutes.
- Place the floating sensor in the water (e.g., pool, pond).
- Place the receiver unit in your desired indoor location, ensuring it is within 300 feet (100 meters) of the sensor and free from major obstructions.
- Wait for the indoor monitor to display data from the outdoor transmitter. Do not press any buttons on the receiver until the outdoor temperature reading appears.
Image: Physical dimensions of the sensor and receiver units, useful for placement considerations.
Инструкция по эксплуатации
1. Измерение температуры
- Once synchronized, the receiver's LCD display will show the current water temperature (from the floating sensor) and the indoor ambient temperature.
- The display also shows the current time and date.
2. Установка времени и даты
Refer to the specific buttons on your receiver unit (usually labeled MODE, SET, UP, DOWN) to adjust the time and date. Typically:
- Нажмите РЕЖИМ button to cycle through display modes (e.g., time, alarm).
- When in time display mode, press and hold the НАБОР кнопку для входа в режим настройки.
- Используйте UP и ВНИЗ кнопки для настройки значений.
- Нажимать НАБОР Ещё раз подтвердите и перейдите к следующей настройке.
3. Установка будильника
The device includes an alarm function. To set an alarm:
- Нажмите РЕЖИМ Нажимайте кнопку до тех пор, пока не отобразится время будильника.
- Нажмите и удерживайте НАБОР кнопку для входа в режим настройки будильника.
- Используйте UP и ВНИЗ кнопки для установки времени будильника.
- Нажимать НАБОР для подтверждения.
- Activate/deactivate the alarm using the designated alarm button (refer to your unit's specific button layout).
Обслуживание
- Уборка: Wipe both the sensor and receiver units with a soft, damp Ткань. Не используйте абразивные чистящие средства или растворители.
- Замена батареи: Replace batteries in both units when the display becomes dim or readings become inconsistent. Follow the battery installation steps in the Setup section.
- Размещение датчика: Ensure the floating sensor is not obstructed and has adequate exposure to sunlight if using rechargeable batteries with the solar function.
- Хранилище: При длительном хранении устройства извлеките все батарейки, чтобы предотвратить протечку. Храните в прохладном, сухом месте.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| No display on receiver or incorrect readings. |
|
|
| Outdoor temperature not displayed. |
|
|
| Неточные показания температуры. |
|
|
Image: Illustration of the wireless transmission range, showing the sensor in a pool and the receiver indoors, emphasizing the 300-foot distance capability.
Технические характеристики
| Особенность | Деталь |
|---|---|
| Номер модели | WT0124 |
| Диапазон наружных температур | от -40°F до 140°F (от -40°C до 60°C) |
| Диапазон температур в помещении | от 32°F до 122°F (от 0°C до 50°C) |
| Точность температуры | ±1.0°С |
| Интервал данных | 48 секунд |
| Макс. дальность передачи | 300 футов (100 метров) |
| Технология связи | 433MHz RF |
| Размеры датчика (Д x Ш x В) | 6" x 3.5" x 3.5" (150 x 88 x 88 мм) |
| Размеры приемника (Д x Ш x В) | 5" x 3" x 1" (125 x 75 x 25 мм) |
| Масса | 0.62 Pounds (0.28 Kg) |
| Мощность датчика | 2 x AA 1.5V Alkaline batteries (not included) |
| Мощность приемника | 2 щелочные батарейки AAA 1.5 В (в комплект не входят) |
| Материал | АБС (акрилонитрилбутадиенстирол) |
| Тип дисплея | Цифровой LCD |
| Специальная характеристика | Alarm, Calendar |
Гарантия и поддержка
AMTAST products are manufactured with quality and reliability in mind. While specific warranty details are not provided in this document, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance, or inquiries regarding your AMTAST WT0124 Wireless Pool Thermometer, please contact AMTAST customer service through their official channels. Refer to the AMTAST webКонтактную информацию можно найти на сайте или в документах о покупке.
AMTAST is a dedicated provider of scientific products and laboratory equipment, committed to offering solutions for various applications.
