Введение
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 2-in-1 Bathroom Exhaust Fan with Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Важная информация по безопасности
Always follow basic safety precautions when installing, operating, or maintaining electrical appliances. Failure to do so may result in fire, electric shock, or injury to persons.
- Disconnect power at the service panel before wiring or servicing this unit.
- Вся проводка должна соответствовать местным электротехническим нормам и стандартам.
- Данное устройство предназначено только для общей вентиляции. Не используйте его для отвода опасных или взрывоопасных материалов и паров.
- To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
- Обеспечьте правильное заземление во избежание поражения электрическим током.
- Не устанавливайте в зоне приготовления пищи.
- Во время установки всегда надевайте защитные очки и перчатки.
Продукт болееview и особенности
The OREiN 2-in-1 Bathroom Exhaust Fan with Light is designed to provide efficient ventilation and illumination for your bathroom. It features a quiet operation and selectable color temperature LED lighting.
The OREiN 2-in-1 Bathroom Exhaust Fan with Light, showcasing its integrated design and the three selectable light color temperatures (3000K, 4000K, 5000K) at the bottom.
Diagram illustrating the premium materials and components, including the heavy-duty housing, powerful motor, easy installation bracket, and energy-efficient LED light.
Visual comparison demonstrating the powerful 100 CFM airflow, showing a bathroom before and after the fan effectively removes steam and humidity.
Взорванный view of the energy-efficient and quiet DC motor, highlighting its design for ultra-quiet operation at 1.5 sones.
Основные характеристики:
- Высокая производительность: Работает со скоростью 100 кубических футов в минуту (CFM) для эффективного удаления влаги и запахов.
- Тихая работа: Rated at 1.5 Sones for minimal noise disruption.
- Встроенный светодиодный светильник: Bright 1000lm LED light illuminates your bathroom.
- 3CCT Selectable Lighting: Choose between 3000K (soft white), 4000K (bright white), or 5000K (daylight) color temperatures.
- Функция ночного освещения: Includes a 2200K nightlight for low-level illumination in the dark.
- Прочная конструкция: Equipped with high-quality components and a DC motor for long-lasting performance.
- Простая установка: Designed with a fast bracket for secure and straightforward installation between ceiling joists.
- Сертификации: FCC and ETL Listed for reliability and safety.
Технические характеристики
Detailed diagram showing the product dimensions, including the light cover size (10.1" x 10.1"), housing dimensions (7.68" x 7.55" x 6.42"), and recommended ceiling opening size (8.11" x 7.48").
An infographic summarizing key product specifications such as material, exhaust volume, sound level, power consumption, and color temperature options.
| Спецификация | Ценить |
|---|---|
| Название модели | OL17001-3CCT |
| Емкость воздушного потока | 100 куб. футов в минуту |
| Уровень шума | 1.5 Сона |
| Ватtage | 25W (Fan) + 10W (Light) |
| Световой поток | 1000лм |
| Цветовая температура | 3000K/4000K/5000K Selectable, 2200K Nightlight |
| Housing Dimensions (L x W x H) | 7.68" x 7.55" x 6.42" |
| Размер светового покрытия | 10.1" x 10.1" |
| Размер проема в потолке | 8.11" x 7.48" |
| Томtage | 120 Вольт |
| Источник питания | AC |
| Тип установки | Для установки заподлицо |
| Сертификаты | FCC, ETL Listed |
Настройка и установка
Before beginning installation, ensure all necessary tools and materials are available. Always disconnect power at the circuit breaker before starting any electrical work.
Инструменты и материалы (не входят в комплект):
- Отвертка (крестовая и плоская)
- Инструменты для зачистки проводов
- Сверлить
- Измерительная лента
- Канцелярский нож или пила для гипсокартона
- Клейкая лента или клейкая лентаamps
- Защитные очки и перчатки
Этапы установки:
- Подготовьте открытие: Ensure the ceiling opening is 8.11" x 7.48". If replacing an existing fan, remove the old unit.
- Установите корпус: The fan comes with a fast bracket for secure installation. Mount the bathroom fan light combo between ceiling joists using the fast bracket, or nail/screw it directly to the joist. The housing dimensions are 7.68" x 7.55" x 6.42".
- Подсоедините воздуховоды: Connect the appropriate ductwork (not included) to the fan's exhaust port. Ensure the duct does not bend into the opening to block the damper. Secure with duct tape or clampдля предотвращения утечек воздуха.
- Проводка: Follow the wiring diagrams provided below. Ensure all connections are secure and comply with local electrical codes. This unit requires a 120V AC power source.
- Установите крышку светильника: Once wiring is complete and tested, attach the light cover (10.1'' x 10.1'') to the fan housing.
Detailed wiring diagrams for the OREiN bathroom fan, showing configurations for a single switch controlling both fan and light, and separate switches for fan and light. Includes a warning about duct obstruction.
Инструкция по эксплуатации
Your OREiN Bathroom Exhaust Fan with Light is designed for simple operation. The fan and light functions are typically controlled by wall switches (purchased separately).
Работа вентилятора:
- Turn on the wall switch connected to the fan to activate the exhaust fan.
- The fan operates at 100 CFM to effectively remove moisture and odors from the bathroom.
- Note: The fan may take a few seconds to start up. This slow start mechanism is designed to protect the DC motor and extend its lifespan.
Light Operation (3CCT Selectable & Nightlight):
Visual representation of the three selectable color temperatures: 5000K (daylight), 4000K (bright white), and 3000K (soft white).
An illustration detailing the 3CCT (3000K/4000K/5000K) and nightlight (2200K) features, including the wattage и световой поток.
- Selecting Color Temperature (CCT): Before installation, locate the toggle switch on the back of the bathroom fan housing. Slide this switch to preset your desired LED color temperature: 3000K (soft white), 4000K (bright white), or 5000K (daylight). This setting is fixed once installed unless the unit is accessed again.
- Включение ночника: To switch to the 2200K nightlight mode, cycle the light switch (On-Off-On) within 2 seconds. This rapid cycling will toggle between the main light and the nightlight mode.
Обслуживание
Regular maintenance helps ensure optimal performance and extends the lifespan of your exhaust fan. Always disconnect power at the circuit breaker before performing any maintenance.
Очистка крышки светильника:
- Carefully remove the light cover from the fan housing.
- Протрите крышку мягкой тряпкой.amp тряпка. При необходимости используйте мягкое мыло.
- Не используйте абразивные чистящие средства или растворители, так как они могут повредить отделку.
- Ensure the cover is completely dry before reattaching.
Cleaning the Fan Housing and Motor:
- With the power off, gently vacuum or wipe away any dust or debris from the fan blades and interior of the housing.
- Do not spray water directly into the motor or electrical components.
- Ensure all parts are dry before restoring power.
Поиск неисправностей
If you experience issues with your OREiN Bathroom Exhaust Fan with Light, refer to the following common problems and solutions. If the problem persists, contact customer support.
| Проблема | Возможная причина | Решение |
|---|---|---|
| Вентилятор не включается. | На блок не подается питание. Неплотное соединение проводки. Неисправный настенный выключатель. | Проверьте автоматический выключатель и убедитесь, что питание включено. Убедитесь, что все проводные соединения надежно закреплены (при выключенном питании). Проверьте или замените настенный выключатель. |
| Свет не включается. | На блок не подается питание. Неплотное соединение проводки. Неисправный настенный выключатель. | Проверьте автоматический выключатель и убедитесь, что питание включено. Убедитесь, что все проводные соединения надежно закреплены (при выключенном питании). Проверьте или замените настенный выключатель. |
| Вентилятор шумный. | Засорение воздуховода или неправильная установка. Ослабленное крепление. Мусор в лопастях вентилятора. | Check ductwork for kinks or blockages. Ensure damper is not obstructed. Verify the fan housing is securely mounted to the joists. Отключите питание и очистите лопасти вентилятора. |
| Poor ventilation/humidity remains. | Ductwork obstruction. Fan size inadequate for room. Air leaks in ductwork. | Check ductwork for blockages or kinks. Ensure the fan's CFM rating is appropriate for your bathroom size. Seal all duct connections with appropriate tape. |
| Light color temperature is incorrect. | CCT toggle switch set incorrectly. Accidental nightlight activation. | Ensure the CCT toggle switch on the fan housing is set to your desired temperature (requires accessing the unit). Cycle the light switch (On-Off-On within 2 seconds) to toggle between main light and nightlight mode. |
Информация о гарантии
OREiN products are manufactured to high-quality standards and are warranted to be free from defects in materials and workmanship. Specific warranty terms and duration may vary. Please retain your proof of purchase for warranty claims.
For detailed warranty information or to initiate a warranty claim, please contact OREiN customer support using the information provided in the Support section.
Поддержка клиентов
For any questions, technical assistance, or support regarding your OREiN Bathroom Exhaust Fan with Light, please contact our customer service team.
- Поддержка по телефону: 1(844)506-1530 (24-Hour Service)
- Онлайн поддержка: Contact us directly on Amazon or search for 'OREiN' online to find our official webВарианты сайта и контактной информации.
- Возврат: While returns can be processed through Amazon's logistics, we encourage you to contact us first for assistance with any issues before initiating a return.
Image showing a customer service representative and the 24-hour service phone number for support.
