Комплект охранной сигнализации TOWODE WiFi (модель: домашняя сигнализация) — руководство по эксплуатации
Подробное руководство по настройке, эксплуатации и обслуживанию.
1. Продукт закончилсяview
This Wireless Security System kit provides comprehensive protection for your home, office, or shop. It includes a WiFi loud speaker, door/window sensors, and remote controls, all managed via the Tuya App.
Image 1: Complete TOWODE WiFi Security Alarm System Kit components.
2.Основные характеристики
- Комплексная защита: Includes 6 door/window alarm sensors, 2 remote controls, 1 WiFi loud speaker, and 1 power plug for a complete security solution.
- Intelligent Security Management: Operates on a 2.4 GHz WiFi connection and offers remote control through the Tuya App (Android and iOS) for easy mode changes and device management.
- Мгновенные оповещения: Sensors trigger a 120 dB loudspeaker alarm and send immediate notifications to your smartphone when doors or windows are opened.
- Расширяемая система: Supports up to 20 remote controls and 30 additional sensors (e.g., motion, water leakage) with 433MHz wireless frequency (eV1527 code).
- 2.4 GHz WiFi Only: This product is exclusively compatible with 2.4 GHz WiFi networks and does not support 5G networks.
3. Настройка и установка
3.1 Компонент Overview
Громкоговоритель WiFi
Изображение 2: Подробно view of the WiFi Loud Speaker components.
Дистанционное управление
Image 3: Remote control for arming, disarming, SOS, and ringtone functions.
Датчик двери/окна
Image 4: Wireless Door Alarm Sensor installation exampле.
3.2 Установка батареи датчика
The door/window sensors come with batteries included, but an insulation sheet must be removed before first use. To replace the battery, follow these steps:
- Push the back panel of the sensor downward to remove it.
- Remove the insulation sheet or the old battery and install a new 12V battery (type 23A).
- Push the back panel upward to complete the installation.
Video 1: Demonstrates how to remove the insulation sheet and replace the battery in the D025 Door/Window Sensor (0:24-1:12).
3.3 App Configuration (Tuya Smart / Smart Life)
Before configuring the network, ensure your phone is connected to a 2.4 GHz WiFi network, Bluetooth is enabled, and Location Services are authorized for the Tuya Smart App.
Video 2: Guides through network configuration for the WiFi speaker using the Tuya Smart App (1:03-4:24).
3.4 Сопряжение датчиков и пультов дистанционного управления
3.4.1 Pairing with Standalone Speaker
- Unplug and plug the power cord of the standalone speaker three times to put it into pairing mode.
- Trigger the door sensor (open/close) within 6 seconds to pair.
- Unplug and replug the power cord to exit pairing mode.
Video 3: Demonstrates pairing a door sensor with a standalone speaker (1:13-1:25).
3.4.2 Pairing with WiFi Speaker via SET button
- Press the SET button on the WiFi speaker to put it into pairing mode.
- Trigger the door sensor (open/close) within 20 seconds to pair.
Video 4: Shows how to pair a door sensor with the WiFi speaker using the SET button (1:54-2:00).
3.4.3 Adding Accessories via App
To add additional sensors or remote controls through the Tuya App:
- Open the Tuya App and navigate to the 'Accessories' section.
- Press the '+' icon to enter pairing mode.
- Trigger the detector (e.g., open a door sensor, activate a motion sensor) or press a button on the remote control. The app will confirm successful addition.
Video 5: Demonstrates adding accessories like motion sensors and remote controls via the Tuya App (5:37-6:32).
3.5 Setting Detector Zone Modes
Each detector can be assigned a specific zone mode to determine how the WiFi Alarm Hub responds when triggered. The table below outlines the different modes:
| Режим зоны детектора | Разоружение | В гостях | Домашняя рука |
|---|---|---|---|
| Нормальный | X | O | O |
| Задерживать | X | O | O |
| Дома | X | O | X |
| Домой с задержкой | X | O | X |
| 24 часов | O | O | O |
| 24 часа тишины | O | O | O |
| Выключенный | X | X | X |
Note: "X" means the WiFi Alarm Hub will not trigger, "O" means the WiFi Alarm Hub will trigger.
Video 6: Instructions on how to set detector zone modes via the Tuya App (6:33-7:54).
4. Операция
- Постановка на охрану: Use the Tuya App or the remote control to set the system to 'Away Arm' (all sensors monitored) or 'Home Arm' (perimeter sensors monitored).
- Снятие с охраны: Use the Tuya App or the remote control to disarm the system.
- Уведомления: Receive real-time alerts on your smartphone when an alarm is triggered.
- Запланированная постановка/снятие с охраны: Configure automatic arming and disarming times through the Tuya App.
5. Поиск Неисправностей
- Нет подключения к приложению: Ensure your WiFi network is 2.4 GHz. This system is not compatible with 5G networks. Verify Bluetooth and Location Services are enabled and authorized for the app.
- Датчики не сопрягаются: Ensure the insulation sheet is removed from the sensor battery. Follow the pairing instructions carefully, ensuring the speaker is in pairing mode and the sensor is triggered within the specified time.
- Ложные тревоги: Check sensor placement and ensure they are securely mounted. Avoid installing door contacts on metal doors, as this can interfere with operation.
- Проблемы с дистанционным управлением: Verify the remote control battery is functional. Ensure the remote is paired correctly with the system.
6. Технические характеристики
| Особенность | Деталь |
|---|---|
| Бренд | ТОУОД |
| Номер модели | Home Alarm System |
| Технология связи | Wireless (2.4 GHz WiFi, 433MHz for sensors) |
| Уровень звука | 120 децибел |
| Метод контроля | Приложение, Удаленное управление |
| Источник питания | Battery Powered (6 x 12V batteries included for sensors) |
| Материал | АБС |
| Размеры продукта | 15.3 х 15.3 х 8.5 см |
| Вес товара | 690 г |
| Метод установки | Screw-In/Self-Adhesive/Wall-Mounted |
